29 lines
1.9 KiB
Markdown
29 lines
1.9 KiB
Markdown
# Station Guide — Data Exploration Page
|
||||
|
|
|
|||
|
|
This page is used to display and review stored measurements. The table lists the measurement
|
|||
|
|
databases available in the camera’s local storage.
|
|||
|
|
In addition to the principal displacement signals, Data Exploration provides access to diagnostic
|
|||
|
|
metrics describing target visibility, image quality, registration quality, and camera movement.
|
|||
|
|
Together with the corresponding camera images, these signals provide powerful tools for
|
|||
|
|
understanding abnormal measurements and assessing measurement reliability.
|
|||
|
|
Select Acquisition: choose the acquisition you want to review. Each acquisition is organized
|
|||
|
|
chronologically, from oldest to most recent, based on the recording date and time.
|
|||
|
|
To retrieve acquisitions from a specific day and around the same period, expand the drop-down
|
|||
|
|
menu. The collapsible panel displays all acquisitions performed during that session and provides
|
|||
|
|
access to the full list of recordings for more precise selection and review.
|
|||
|
|
Example of selecting an acquisition
|
|||
|
|
The plot options section has two categories:
|
|||
|
|
• Filters: remove camera motion from the measurement, remove the offset from the data
|
|||
|
|
points, or apply a rolling median
|
|||
|
|
• Obstruction handling: highlight areas where the error value is too high, hide data points
|
|||
|
|
whose error value exceeds the threshold, replace hidden data points with interpolated
|
|||
|
|
values, and override the error threshold with a user-defined value
|
|||
|
|
Selected Plot Options
|
|||
|
|
Measurement results for the acquisition dated 12.03.2026
|
|||
|
|
The “Update !” button queries the selected database and displays the latest data. This can be
|
|||
|
|
automated by enabling the “Auto Update” switch.
|
|||
|
|
When “Auto Update” is enabled, the latest measurement data is queried and plotted periodically.
|
|||
|
|
The refresh period is defined by the “Interval” setting, in seconds.
|
|||
|
|
The “Time Range” setting determines the time window queried and displayed in the chart.
|
|||
|
|
|
|||
|
|
Source : AIMsight Station Guide, rév. 1.5
|