21 lines
1.6 KiB
Markdown
21 lines
1.6 KiB
Markdown
# (AIMsight Cloud — optional service) How can I apply a target configuration from a historical image?
|
|||
|
|
|
||
|
|
The general Pattern Configuration workflow is shared by the local station interface and AIMsight
|
||
|
|
Cloud. The Cloud interface additionally allows patterns to be defined from a stored image and
|
||
|
|
the affected measurements to be reprocessed.
|
||
|
|
After selecting the image at the required date and configuring the targets, the Actions button and
|
||
|
|
Update Strategy dropdown determine how the new reference is applied:
|
||
|
|
• Reinitialize — Uses the selected image and configuration as a new reference and restarts
|
||
|
|
the corresponding displacement values from zero. This is typically used when reconfiguring
|
||
|
|
all targets, for example after a significant movement or repositioning of the camera station.
|
||
|
|
• Reinitialize with motion compensation — Preserves the reference network and cameramotion correction while reinitializing an individual target. A typical case is a prism that was
|
||
|
|
accidentally moved and then placed back at a slightly different position.
|
||
|
|
• Continuous — Applies the updated pattern or reference while preserving continuity of the
|
||
|
|
existing measurement trace. The displacement curve therefore does not return to zero
|
||
|
|
when the new reference is introduced. This is useful when a pattern must be updated or
|
||
|
|
refined without creating a discontinuity in the history.
|
||
|
|
Before applying the action, verify the date of the selected image, the target zones, the reference
|
||
|
|
network, and the intended result. The selected strategy determines both the measurement zero
|
||
|
|
and the continuity of the reprocessed data.
|
||
|
|
|
||
|
|
Source : AIMsight FAQ, rév. 1.5
|