17 lines
1.0 KiB
Markdown
17 lines
1.0 KiB
Markdown
# My AIMsight camera does not start. What should I check?
|
|||
|
|
|
||
|
|
First check that the internal battery is connected. Depending on transport or storage conditions,
|
||
|
|
the battery may have been disconnected and must be connected before commissioning.
|
||
|
|
Then connect the external power supply and check the charging / power LED.
|
||
|
|
If the LED does not turn on:
|
||
|
|
• check that the external power supply is connected;
|
||
|
|
• check the power connectors and cabling;
|
||
|
|
• for a mains-powered installation, verify that the power supply is energized;
|
||
|
|
• for a solar-powered installation, verify the solar-panel connection and that sufficient
|
||
|
|
charging voltage is available.
|
||
|
|
If the unit appears to be powered but cannot be reached remotely, try connecting to it locally
|
||
|
|
over Ethernet. This helps distinguish a startup or power problem from a 4G or remoteconnectivity problem.
|
||
|
|
If there is no charging indication and the system remains unreachable after checking the power
|
||
|
|
supply and battery connection, contact AIMsight support.
|
||
|
|
|
||
|
|
Source : AIMsight FAQ, rév. 1.5
|