Base de connaissances : corpus relu (FAQ, manuel, savoir métier) et instructions communes

Découpage : page précédée de U+2060, titres coupés sur plusieurs lignes,
saut de page dans la table des matières (trois tests).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
This commit is contained in:
maximeandClaude Opus 5.5 committed 2026-11-11 14:10:35 +01:00
1 parent d7c9ceccd1
commit 4d75fb6172
123 files changed
+2016 -11

No files matched your search

@@ -0,0 +1,25 @@
# Station Guide — Network Settings
This section describes the Network Settings interface of the AIMsight Monitoring software. It
allows configuration of how the device communicates with external systems and local networks.
The interface is divided into two main sections:
• Ethernet (wired network)
• Cellular network (mobile connection)
The Ethernet section manages the physical connection through an Ethernet cable. Two
configuration modes are available:
• automatic (DHCP)
• manual (static IP)
Automatic configuration is recommended whenever possible.
• Automatic configuration (DHCP): by default, the camera is configured as a DHCP server
and automatically assigns an IP address to the connected computer. The computer must be
configured to obtain an IP address automatically, and no external network infrastructure is
required.
• Manual configuration: the IP address is configured manually.
Recommended manual configuration:
• IP address: 192.168.1.10
• Subnet mask: 255.255.255.0
CAUTION
The PC must be configured within the same network range as the camera (192.168.1.X) and
must use a unique IP address to prevent IP conflicts.
Source : AIMsight Station Guide, rév. 1.5