# Station Guide — Access Modes The AIMsight station provides three complementary access modes: • Local access to the station: when the station includes a standalone local software licence, a computer connected directly to the station by Ethernet, or connected to the same local network, can access the web interface hosted on the station. This mode does not require an Internet connection or an AIMsight Cloud subscription. Acquisition, image processing, and local data storage remain fully autonomous. To connect directly, use the supplied Ethernet cable and open the station interface in a web browser. The system has been tested with Mozilla Firefox, Microsoft Edge, and Google Chrome. By default, the station uses the static IP address 192.168.1.2. Enter this address in the browser address bar. If the station cannot be reached, refer to the Network Settings section (see page 21). • Remote access to the station interface: when the station has an Internet connection and the remote-access service is enabled, AIMsight can provide secure remote access to the station’s local web interface. The user sees the same interface and functions as when connected locally and can, for example, check the station status, adjust its configuration, or review data stored on the station. The station establishes an encrypted connection to a secure gateway managed by AIMsight. This normally avoids the need for a public IP address or for incoming ports to be opened on the customer’s network. Because this remains a direct connection to the station, the station must be powered on and connected to the Internet. This service does not by itself create a Cloud archive: the information being viewed remains stored on the station. • AIMsight Cloud: when this optional service is enabled, the station transfers its measurements and, depending on the configuration, associated images and quality metrics to the AIMsight platform. Authorized users can then access the project data through a web browser without connecting directly to the station. AIMsight Cloud can centralize and archive measurements, provide access to their history and associated images, display target-recognition quality metrics, and provide alarm, visualization, and post-processing tools. Data that have already been transferred remain accessible if the station is temporarily offline. AIMsight Cloud is typically provided as a subscription service. NOTE Standalone operation requires a local software licence. The station can also be supplied without this licence; in that configuration, its operation depends on an active AIMsight Cloud subscription. The applicable licensing model and the functions available without a Cloud connection are specified in the project quotation or agreement. Source : AIMsight Station Guide, rév. 1.5