Découpage : page précédée de U+2060, titres coupés sur plusieurs lignes, saut de page dans la table des matières (trois tests). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
1.9 KiB
Where should reference targets be placed?
Reference targets are used to estimate and compensate for movements of the camera itself. Their placement therefore has a direct influence on the quality of this compensation. Whenever possible, references should be installed on elements that can reasonably be considered stable and distributed across the image, ideally surrounding or framing the area containing the measurement points. A good horizontal and vertical distribution makes it easier to distinguish camera pan, tilt and roll and avoids extrapolating the correction from references concentrated in a small part of the image. It is also preferable to place the references at a distance comparable to or greater than that of the measurement points, ideally in the background. More distant references are less sensitive to parallax effects caused by small translational movements of the camera support. Conversely, references located significantly in the foreground may show a relatively large apparent displacement following a small lateral movement of the camera. If this information is then used to correct points located much farther away, the camera movement may be overcompensated. In practice, preference should therefore be given to: • supports whose stability can reasonably be assumed; • references located as far from the camera as practical, preferably in the background of the monitored area; • references distributed around the measurement area rather than grouped in a single part of the image; • references that will remain reliably visible over time, with limited risk of obstruction by vegetation, vehicles, equipment or other objects. If no perfectly fixed references are available, several measurement points can also be used together as a reference network. Camera movement is then estimated robustly from the overall network, while the system remains sensitive to differential movements between individual points.
Source : AIMsight FAQ, rév. 1.5