1 parent
e7c03e7304
commit
3ea6b3e419
2 files changed
+10
-6
No files matched your search
@@ -17,9 +17,11 @@ Method, per target (global references excluded) and per axis (corr_x, corr_y):
|
||||
"Thermal expansion" from the start to the hour of the largest gap from the night level (the peak), then "Thermal
|
||||
contraction" until the return. The warm hours say there is a cycle (at least MIN_WARM_HOURS of them); its bounds
|
||||
are read lower, at EDGE times the amplitude: the start, going back from the peak while the gap stays ≥ EDGE (at most
|
||||
to the calmest hour of the profile); the return, going down from the peak until it goes back under EDGE, after
|
||||
to the calmest hour of the profile); the return, going down from the peak until it goes back under RETURN, after
|
||||
midnight if needed, at most to the next day's start: a slow return at night chains the cycles (wf-improve session
|
||||
Thermal displacement, mod. 1, S1). The direction (a rising or falling curve) depends on the target's orientation:
|
||||
Thermal displacement, mod. 1, S1). RETURN is half of EDGE: the warm-up is quick, the cooling tail slow, and the
|
||||
labelled nights went on after the return reached EDGE (wf-improve NORDEND 2026-11-05, S1: NORDEND, JUNGFRAU; EDGE
|
||||
itself at 0.05 made FLORIDA and SNCF01 overflow in the morning). The direction (a rising or falling curve) depends on the target's orientation:
|
||||
it is not looked at, only the gap from the night level.
|
||||
Reading: the cycle is almost everywhere in the raw positions (common mode) and the compensation removes it, except at
|
||||
PS des Coudres where it stays in corr, with the same shape as in the raw positions.
|
||||
@@ -62,7 +64,8 @@ DAY_MATCH = 0.5 # likeness of a day to the others to give it its episode
|
||||
NIGHT = 8 # flattest consecutive hours of the profile = night level
|
||||
R2_MIN = 0.3 # draft of 2026-10-24: PS des Coudres 14 axes out of 22 above, CLARIDEN 0 out of 48
|
||||
MIN_WARM_HOURS = 2 # WILDSTRUBEL, batch 01; NIEDERHORN (E-005) has only one warm hour (noon)
|
||||
EDGE = 0.1 # bounds of the wave (start, return), as a share of the amplitude; WARM says whether there is a cycle
|
||||
EDGE = 0.1 # start of the wave, as a share of the amplitude; WARM says whether there is a cycle
|
||||
RETURN = 0.05 # return of the wave, lower: the cooling tail is slow (wf-improve NORDEND 2026-11-05, S1)
|
||||
SLIDE_K = 3 # common slide, in noises (median of the steps) away from the median of the day before
|
||||
COLD = 4 # the camera moves with the cold, in one-hour noises away from the day before (pose, temperature)
|
||||
W = 2 * math.pi / 86400 # angular frequency of a 24 h cycle, in rad/s
|
||||
@@ -259,8 +262,8 @@ def _episodes(measurements, cols, name, camera):
|
||||
a = peak # start: going back from the peak while the profile stays above EDGE, up to the calmest hour
|
||||
while (a - 1) % 24 != rest and e[(a - 1) % 24] >= EDGE:
|
||||
a -= 1
|
||||
b = peak + 1 # return: until the profile goes back under EDGE, at most to the next start
|
||||
while b < a + 24 and e[b % 24] >= EDGE:
|
||||
b = peak + 1 # return: until the profile goes back under RETURN, at most to the next start
|
||||
while b < a + 24 and e[b % 24] >= RETURN:
|
||||
b += 1
|
||||
last = max(m["t"] for ms in measurements.values() for m in ms)
|
||||
days = sorted({d for c in concerned for d in c[3]})
|
||||
|
||||
Reference in new issue
Block a user