auto: the analysts verified the labels of 32 periods (11 stations, up to 14 days each): 710 labels -> 835, 587 unchanged; one analysis folder per period with its report (section Verification)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
This commit is contained in:
1 parent
df979301b5
commit
2a5d87659b
279 files changed
+10758
-710
No files matched your search
@@ -0,0 +1,56 @@
|
||||
# Labels: FLORIDA, 2026-10-01T00:00Z → 2026-10-11T09:45Z (UTC)
|
||||
|
||||
Task: verify the 20 existing labels (`work/existing.jsonl`). No weather for FLORIDA (no `weather/` folder). Older camera: the image-quality columns are empty, so `quality.py` does not apply. Two references only (p1_r, r1_r), each with its twin target (Sellette 3, Pont Ernen). Per-instant table: `scripts/dump.py` → `work/dump.txt`. Check for uncovered moments: `scripts/uncovered.py` (rejections, and corr beyond 3.5–5 noises of a ±6 h rolling median).
|
||||
|
||||
## Verdict per old id
|
||||
|
||||
| id | verdict | evidence |
|
||||
|---|---|---|
|
||||
| FLORIDA-2 | kept | Massif 2 rejected 07:30–07:45, back at 08:00 |
|
||||
| FLORIDA-3 | kept | hourly pose leaves its night level at about 09 h (pan, tilt), comes back in the evening; the housing temperature peaks at 13 h |
|
||||
| FLORIDA-4 | corrected | 20:45 is already touched: error_value up on every sensor, pose tilt step, Sellette 4/5 corr shifted → start 20:30. Description: no registration from 21:00 (p1_r rejected), not only from 23 h; Massif 2 and Sellette 6 are kept 21:00–22:30 |
|
||||
| FLORIDA-5 | kept | gap of one measurement at 02:00; no change |
|
||||
| FLORIDA-6 | corrected | bounds right (r1_r rejected 10:00–10:15). Cause: the 10:00 thumbnail shows the background behind r1_r in full sun, the spot drowned (as JUNGFRAU-50/55); the same lit background is seen on 03, 04, 05, 06, 07, 09 and 10/10 at 10:00. The old text said "cause not established, nothing in front" |
|
||||
| FLORIDA-7 | corrected | "the other targets do not move" is false at 10:45: Sellette 4, 5 and 6 corr_x jump down together with an error spike of p1_r (new label) |
|
||||
| FLORIDA-8 | kept | |
|
||||
| FLORIDA-9 | corrected | the event is wider: rigid residual of r1_r drifts from 18:45 (to −0.2 px at 21:45), back at 22:15; corr_x of Massif 2, Sellette 5 and 6 up 18:45–21:45; then p1_r flickers (error up to 0.55, rigid dx +0.04 to +0.05) with joint drops of Sellette 4/5/Massif 2 at 22:30, 22:45 and 23:15, back at 23:30. r1_r thumbnails 19–22 h: smaller spot (p99 about 150 against 239 at 18:00 and 232 at 23:00). New bounds 18:30 → 23:30 |
|
||||
| FLORIDA-10, 11, 12, 13, 15 | kept | daily pose cycle seen on the hourly median with the housing temperature; FLORIDA-11 start (11:45) checked: hourly tilt leaves at 11–12 h |
|
||||
| FLORIDA-16 | kept | start 03:15 (first touched point 03:30); end 08:00 (pose step back at 08:00 on the 9th) |
|
||||
| FLORIDA-17, 18, 19, 21, 22 | kept | 18: Sellette 4 reaches the new level at 13:15–13:30 |
|
||||
| FLORIDA-20 | corrected | same as FLORIDA-6: the 10:00 thumbnail of the 9th shows r1_r's background lit by the sun |
|
||||
|
||||
Spanning FLORIDA-1 (Sellette 6) and FLORIDA-14 (Massif 2): consistent within the range; nothing to change.
|
||||
|
||||
## 1. My labels (added)
|
||||
|
||||
### 2026-10-02T08:30Z → 2026-10-02T09:45Z
|
||||
- **Phenomenon of the catalogue**: A reference loses its brightness, without an obstacle
|
||||
- **Precedents**: none useful
|
||||
- **Family**: Visibility. The reference is less well seen; it is not an object (Obstruction)
|
||||
- **Measured**: rigid residual of r1_r dx −0.03 (08:30), −0.18 (08:45), −0.13 (09:00–09:15), −0.11 (09:30), −0.02 (09:45); Massif 2 corr_x +0.20 to +0.23 and Sellette 6 corr_y −0.28 to −0.33 (08:45–09:15); pan −0.021 against −0.046; scale 1.0006 against 1.0013
|
||||
- **Images**: r1_r thumbnails: peak 40 at 02/10 09:00, against 255 at 11:00 and on 03/10 09:00
|
||||
- **Confidence**: high
|
||||
|
||||
### 2026-10-02T10:30Z → 2026-10-02T11:00Z
|
||||
- **Phenomenon**: none exact (a reference near its threshold). **Family**: Visibility, consistent with FLORIDA-22. **Measured**: p1_r and Sellette 3 error 0.63 against 0.42 at 10:45; rigid p1_r dx +0.09; Sellette 4/5/6 corr_x −0.10 to −0.12, back at 11:00. **Images**: none at 10:45. **Confidence**: medium (cause)
|
||||
|
||||
### 2026-10-02T18:00Z → 2026-10-02T18:30Z
|
||||
- Massif 2 alone at 18:15: error 0.68, corr_y +0.17 (7 noises). Visibility like FLORIDA-2, 7 and 9. **Confidence**: medium
|
||||
|
||||
### 2026-10-04T08:30Z → 2026-10-04T09:00Z
|
||||
- **Precedents**: WYOMING-17 (one-measurement jump of a reference alone, Displacement, cause not established). **Measured**: at 08:45 Sellette 5 −0.10, Massif 2 −0.13, Sellette 6 −0.17 in corr_x against about −0.03; rigid r1_r dx +0.128; error of r1_r normal (0.20); tilt and scale jump. **Images**: none at 08:45; r1_r normal at 08:00 and 09:00. **Confidence**: medium
|
||||
|
||||
## 2. What I left without a label
|
||||
- About 10:00 on sunny days (03 to 06/10), the sun lights r1_r's background: a pose spike and small jumps of Massif 2 (and Sellette 4/5 on the 5th), about 3 to 4 noises, mostly inside the thermal labels. Left without a label: below the threshold and single-sensor.
|
||||
- Isolated single-sensor deviations of 3.5 to 5 noises (list from `uncovered.py`): Massif 2 on 01/10 06:30–07:00 and 04/10 05:45; Sellette 4/5 on 03/10 and 05/10 at night, and 07/10 at 22:45.
|
||||
- Twins Pont Ernen and Sellette 3: quantised flicker of their corr near zero, not labelled (twins).
|
||||
|
||||
## 3. The documentation
|
||||
- Helpful: `families.md` (a hindered reference: family of the cause), the reading rules on two references, and `overview.py --rigid`, which showed the reference slides the old labels had missed. Precedents JUNGFRAU-50/55 (sun behind a reference) and WYOMING-17.
|
||||
- Not covered by the docs: on a two-reference station, rigid residuals of a reference of ±0.1 px are frequent. There is no rule for the size of a joint jump that is worth a label; I used about 4 to 5 noises on at least two targets together.
|
||||
|
||||
## Difficulties
|
||||
- Usage limit reached during the work. The thermal labels were checked on their hourly pose and temperature, not edge by edge at the native step.
|
||||
|
||||
## Sources read
|
||||
`instructions/analyst.md`, `tools/GUIDE.md`, `tools/DATA.md`, `labeling/families.md`, `labeling/labeling-rules.md`, `labeling/reading-rules.md`, `labeling/stations.md`, `labeling/auto/FLORIDA.jsonl` (labels near the range), `work/existing.jsonl`, `work/spanning.jsonl`, precedents (one query). Tools: inventory, overview (common, residuals, rigid), days `--bounds`, metrics, thumbnails; images 02/10 09:00 and 12:00.
|
||||
@@ -0,0 +1,24 @@
|
||||
{"start": "2026-10-01T07:15Z", "end": "2026-10-01T08:00Z", "family": "Visibility", "description": "Massif 2 alone is rejected for two measurements in a row at daybreak, its curve is missing; the other targets do not move (Sellette 6, rejected as usual, aside). Its error_value rises gradually as the scene brightens, passes the threshold, then comes back down once day has broken. Seen on the 06:00, 07:00 and 08:00 images: the spot of Massif 2 shrinks as day breaks, nothing in front of it; that of Sellette 4 stays wide. Deduced cause: the transition from night to day on an already weak spot. These are the first rejections of Massif 2, isolated, before it becomes a problem target from the 6th (labeled separately). Points to ignore; this is not a movement.", "review": "2026-11-17"}
|
||||
{"start": "2026-10-01T09:45Z", "end": "2026-10-01T19:00Z", "family": "Thermal displacement", "description": "Thermal cycle of the day: with the rise of the housing temperature, the camera pose drifts (mostly the pan) until the middle of the afternoon, then returns at the end of the day; the corr_x of Sellette 6, Massif 2 and Sellette 4 rises a little during the day, the corr_y of Sellette 6 too, and returns in the evening. Deduced: the camera movement follows the housing temperature, ordinary error_value outside the other episodes. Thermal movement of the camera (and perhaps of the pipe carrying the targets): normal, nothing to do.", "review": "2026-11-17"}
|
||||
{"start": "2026-10-01T20:30Z", "end": "2026-10-02T08:45Z", "family": "Visibility", "description": "Night of rain or mist: from 20:45 the error_value of all the targets and of both references rises together and the corrected curves of Sellette 4 and Sellette 5 already shift a little; from 21:00 p1_r (and its twin Sellette 3), Sellette 4 and Sellette 5 are rejected all night and the camera is no longer registered until the morning. From 21:00 to 22:30 the kept measurements of Massif 2 and Sellette 6 jump strongly downward in corr_y (compensation on r1_r alone); from 22:45 to about 02:00 almost all the sensors are rejected, then only rare points remain, still shifted. Seen on the 00:00 image: very weak spots, drops on the leaves in the foreground. Everything comes back in the morning, Sellette 4 last. The structure does not move: nothing to do, curves of the range to ignore."}
|
||||
{"start": "2026-10-02T01:45Z", "end": "2026-10-02T02:15Z", "family": "No data", "description": "One measurement absent for all sensors, although the image of that moment exists; the station synchronizes at that moment and its voltage is normal: it is running, the measurement is missing; measurements resume at the next one. SNCF01 has no data yet that day. This one-measurement gap in the night, around 02:00 UTC, falls on the same measurement at FLORIDA and SNCF01 on 09, 14 and 15/10, and only on them; other stations have the same night gap around the same hour in other weeks (JUNGFRAU and NORDEND in early September): a common cause outside the station, at night, is probable; it is not established. Nothing to do on the station if it does not get worse.", "review": "2026-11-17"}
|
||||
{"start": "2026-10-02T08:30Z", "end": "2026-10-02T09:45Z", "family": "Visibility", "description": "The morning after the rain, the reference r1_r, one of the only two references of the station, loses its light without being rejected: on the 09:00 thumbnail its spot is barely visible, much fainter than on the 11:00 thumbnail and than the 3rd at 09:00, nothing in front of it. Its measured position slides against the targets, the camera pose (pan, scale) goes off, and the compensation passes it into all the targets: the corr_x of Massif 2 and Sellette 5 rise, that of Sellette 4 drops, the corr_y of Sellette 6 drops, then everything comes back at 09:45. Deduced cause: a reference that loses its brightness after the rain, without obstacle. With two references, the slightest error of one passes into all the points: points to ignore; this is not a movement."}
|
||||
{"start": "2026-10-02T09:45Z", "end": "2026-10-02T10:30Z", "family": "Visibility", "description": "r1_r, one of the only two references of the station, sees its error_value rise above the threshold for two measurements, in the morning: it is rejected and the camera is no longer registered. The corrected curves are then computed on p1_r alone: the corr_x of Massif 2, Sellette 4 and Sellette 5, and the corr_y of Massif 2 and Sellette 5, jump a little and return at the next registration. Pont Ernen, the twin of r1_r, is rejected with it. Raw positions of the targets without a step. Seen on the 10:00 thumbnail: the background behind r1_r, a tiny spot, is in full sun and its spot drowns in it; the same sunlit background comes back on the other sunny mornings at that hour. Not a movement: data of the range not to be trusted, nothing to do on the structure."}
|
||||
{"start": "2026-10-02T10:30Z", "end": "2026-10-02T11:00Z", "family": "Visibility", "description": "For one measurement in late morning, the error_value of the reference p1_r (and of its twin Sellette 3) rises clearly, under its threshold: the compensation, on two references only, is distorted and the corr_x of Sellette 4, Sellette 5 and Sellette 6 jump down together, then return at the next measurement; Massif 2 is rejected at the same instant (labeled separately). No image at that instant; the scene is in full daylight at 10:00 and 11:00. Cause not established, probably the morning light on the reference. Not a movement: points to ignore."}
|
||||
{"start": "2026-10-02T10:30Z", "end": "2026-10-02T11:45Z", "family": "Visibility", "description": "Massif 2 alone is rejected for four measurements in a row in late morning, its curve is missing, then returns to its level. At its first rejection the other targets jump for one measurement with the reference p1_r (labeled separately), then do not move. Seen on the 11:00 image: by day, the spot of Massif 2 is only a point, smaller than at 12:00, nothing in front of it; same appearance on the 3rd at 11:00, without rejection that day. Cause not established: daylight on a weak spot. Isolated rejections, before the Target issue of Massif 2 (from the 6th, labeled separately). Points to ignore; this is not a movement."}
|
||||
{"start": "2026-10-02T10:45Z", "end": "2026-10-02T18:00Z", "family": "Thermal displacement", "description": "Thermal cycle of the day: with the rise of the housing temperature, the camera pose drifts (mostly the pan) until the middle of the afternoon, then returns at the end of the day; the corr_x of Sellette 6, Massif 2 and Sellette 4 rises a little during the day and returns in the evening. Deduced: the camera movement follows the housing temperature, ordinary error_value outside the other episodes. Thermal movement of the camera (and perhaps of the pipe carrying the targets): normal, nothing to do.", "review": "2026-11-17"}
|
||||
{"start": "2026-10-02T18:00Z", "end": "2026-10-02T18:30Z", "family": "Visibility", "description": "At nightfall, Massif 2 alone keeps one measurement with its error_value just under the threshold, and its corr_y jumps clearly upward, then returns at the next measurement; the other targets do not move. On the 18:00 thumbnail its spot is as usual. Deduced cause: a weak spot at the change of light, as at its other isolated rejections before its Target issue (from the 6th, labeled separately). Point to ignore; this is not a movement."}
|
||||
{"start": "2026-10-02T18:30Z", "end": "2026-10-02T23:30Z", "family": "Visibility", "description": "At the start of the night, the reference r1_r, one of the only two references of the station, weakens: on the thumbnails from 19:00 to 22:00 its spot is smaller than at 18:00 and 23:00, nothing in front. Its measured position slides against the targets and the camera pose follows it; the compensation passes it into the targets: the corr_x of Massif 2, Sellette 5 and Sellette 6 rise a little from 18:45 to 21:45. In the middle of it, the error_value of p1_r (and of its twin Sellette 3) rises for one measurement at 21:00, Sellette 4 jumps down; Massif 2 is rejected for two measurements, its curve is missing, and its corr_y stays low at the next one. Then p1_r flickers: at 22:30, 22:45 and 23:15 the corr_x of Sellette 4, Sellette 5 and Massif 2 drop together and come back at 23:30. Deduced cause: references that lose part of their light at night, without obstacle. Points to ignore; this is not a movement."}
|
||||
{"start": "2026-10-03T08:45Z", "end": "2026-10-03T19:00Z", "family": "Thermal displacement", "description": "Thermal cycle of the day: with the rise of the housing temperature, the camera pose drifts (mostly the pan) until the middle of the afternoon, then returns at the end of the day; the corr_x of Sellette 6, Massif 2 and Sellette 4 rises a little during the day, the corr_y of Sellette 4 goes down a little, and everything returns in the evening. Deduced: the camera movement follows the housing temperature, ordinary error_value outside the other episodes. Thermal movement of the camera (and perhaps of the pipe carrying the targets): normal, nothing to do.", "review": "2026-11-17"}
|
||||
{"start": "2026-10-04T08:30Z", "end": "2026-10-04T09:00Z", "family": "Displacement", "description": "One-measurement jump of the corr_x of Sellette 5, Massif 2 and Sellette 6 (Sellette 4 a little), all downward, then back at the next measurement: in the raw image the targets do not move against each other, while the reference r1_r is measured slightly shifted alone for this measurement, without its error_value rising; the camera pose (tilt, scale) jumps with it and the compensation, on two references only, passes the jump into the targets. No image at that instant; on the 08:00 and 09:00 thumbnails r1_r looks as usual. Cause not established. Not a movement: points to ignore."}
|
||||
{"start": "2026-10-04T11:45Z", "end": "2026-10-04T18:00Z", "family": "Thermal displacement", "description": "Thermal cycle of the day: with the rise of the housing temperature, the camera pose drifts (mostly the pan) until the middle of the afternoon, then returns at the end of the day; the corr_x of Sellette 6, Massif 2 and Sellette 4 rises a little during the day, the corr_y of Sellette 4 goes down a little, and everything returns in the evening. Deduced: the camera movement follows the housing temperature, ordinary error_value outside the other episodes. Thermal movement of the camera (and perhaps of the pipe carrying the targets): normal, nothing to do.", "review": "2026-11-17"}
|
||||
{"start": "2026-10-05T07:45Z", "end": "2026-10-05T19:00Z", "family": "Thermal displacement", "description": "Thermal cycle of the day: with the rise of the housing temperature, the camera pose drifts (mostly the pan) until the middle of the afternoon, then returns at the end of the day; the corr_x of Sellette 6, Massif 2 and Sellette 4 rises a little during the day, the corr_y of Sellette 4 goes down a little, and everything returns in the evening. Deduced: the camera movement follows the housing temperature, ordinary error_value outside the other episodes. Thermal movement of the camera (and perhaps of the pipe carrying the targets): normal, nothing to do.", "review": "2026-11-17"}
|
||||
{"start": "2026-10-06T09:45Z", "end": "2026-10-06T22:00Z", "family": "Thermal displacement", "description": "Thermal cycle of the day: with the rise of the housing temperature, the camera pose drifts (mostly the pan) until the middle of the afternoon, then returns at the end of the day; the corr_x of Sellette 6 rises during the day, that of Sellette 5 and the corr_y of Sellette 4 go down a little, and everything returns in the evening. Deduced: the camera movement follows the housing temperature, ordinary error_value outside the other episodes. Thermal movement of the camera (and perhaps of the pipe carrying the targets): normal, nothing to do.", "review": "2026-11-17"}
|
||||
{"start": "2026-10-07T08:45Z", "end": "2026-10-07T20:00Z", "family": "Thermal displacement", "description": "Thermal cycle of the day: with the rise of the housing temperature, the camera pose drifts (mostly the pan) until the middle of the afternoon, then returns at the end of the day; the corrected curves show almost nothing of it: the compensation absorbs it. Deduced: the camera movement follows the housing temperature, ordinary error_value outside the other episodes. Thermal movement of the camera (and perhaps of the pipe carrying the targets): normal, nothing to do.", "review": "2026-11-17"}
|
||||
{"start": "2026-10-08T03:15Z", "end": "2026-10-09T08:00Z", "family": "Visibility", "description": "Rainy day and damp night: the error_value of the targets and the references rises from 3h30, and the targets jump from that measurement; p1_r (and its twin Sellette 3) is rejected at times until the evening, Sellette 4 and Sellette 5 almost over the whole range, Massif 2 and Sellette 6 often. When p1_r is kept but poorly seen, the camera pose goes off (tilt, scale) and the corr of all the targets jumps strongly; when it is rejected, no more registration. Seen on the images: drops on the leaves at 05:00, scene veiled at 14:00, smaller spots. Back on the morning of the 9th. Not a movement: curves of the range to ignore.", "review": "2026-11-17"}
|
||||
{"start": "2026-10-09T01:45Z", "end": "2026-10-09T02:15Z", "family": "No data", "description": "One measurement absent for all sensors, and no image at that moment; the station nevertheless synchronizes at that moment and its voltage is normal: it is running, the measurement is missing; measurements resume at the next one. This one-measurement gap in the night, around 02:00 UTC, falls on the same measurement at FLORIDA and SNCF01 on 09, 14 and 15/10, and only on them; other stations have the same night gap around the same hour in other weeks (JUNGFRAU and NORDEND in early September): a common cause outside the station, at night, is probable; it is not established. Nothing to do on the station if it does not get worse.", "review": "2026-11-17"}
|
||||
{"start": "2026-10-09T08:00Z", "end": "2026-10-09T13:30Z", "family": "Displacement", "description": "After the rain episode of the 8th, the corr_x of Sellette 5, already shifted upward at the end of the rain, and that of Sellette 4, which joins it in the early afternoon of the 9th, take a slightly higher level and stay there until the morning of the 15th (return labeled separately); at the same time the camera pose has changed level (tilt, scale) and the error_value of r1_r is lower than before the rain. A reference spot that changes appearance changes the basis; the housing temperature also drops on those days and rises again when the shift fades, but at equal temperature, on the 17th and 18th, Sellette 5 does not have this level: link not established. Cause not established. Small, without established movement of the structure: to be monitored.", "review": "2026-11-17"}
|
||||
{"start": "2026-10-09T08:00Z", "end": "2026-10-09T20:00Z", "family": "Thermal displacement", "description": "Thermal cycle of the day: with the rise of the housing temperature, the camera pose drifts (mostly the pan) until the middle of the afternoon, then returns at the end of the day; its effect on the curves is mixed with the shift of Sellette 4 and Sellette 5 that sets in that day (label of the 9th to the 15th); Sellette 6 and Massif 2 are almost always rejected. Deduced: the camera movement follows the housing temperature, ordinary error_value outside the other episodes. Thermal movement of the camera (and perhaps of the pipe carrying the targets): normal, nothing to do.", "review": "2026-11-17"}
|
||||
{"start": "2026-10-09T09:45Z", "end": "2026-10-09T10:15Z", "family": "Visibility", "description": "r1_r, one of the only two references of the station, sees its error_value rise above the threshold for the duration of one measurement, in the morning: it is rejected and the camera is no longer registered. The corrected curves are then computed on p1_r alone: the corr_x of Sellette 6, Sellette 5 and Sellette 4 jump a little and return at the next registration. Pont Ernen, the twin of r1_r, leaves its usual zero when it is not rejected too. Raw positions of the targets without a step. Seen on the 10:00 thumbnail: the background behind r1_r is lit by the sun and its tiny spot drowns in it, as on the other sunny mornings at that hour. Not a movement: data of the range not to be trusted, nothing to do on the structure."}
|
||||
{"start": "2026-10-10T06:45Z", "end": "2026-10-10T20:00Z", "family": "Thermal displacement", "description": "Thermal cycle of the day: with the rise of the housing temperature, the camera pose drifts (mostly the pan) until the middle of the afternoon, then returns at the end of the day; the corrected curves show almost nothing of it apart from the p1_r episode of the morning. Deduced: the camera movement follows the housing temperature, ordinary error_value outside the other episodes. Thermal movement of the camera (and perhaps of the pipe carrying the targets): normal, nothing to do.", "review": "2026-11-17"}
|
||||
{"start": "2026-10-10T07:15Z", "end": "2026-10-10T11:30Z", "family": "Visibility", "description": "In the morning, the error_value of p1_r rises from 7h30 and the corr_y of Sellette 4 and Sellette 5 shifts; then p1_r (and its twin Sellette 3) goes above the threshold and is rejected for several measurements, Sellette 5 and Sellette 6 too: the camera is no longer registered, and at the kept measurements the corr_x of Sellette 4 jumps clearly then returns. Thumbnails: the spot of p1_r has a wider halo at 09:00 than at 13:00, scene in full daylight without obstacle; probably the morning light, cause not established. Not a movement: curves of the range to ignore.", "review": "2026-11-17"}
|
||||
@@ -0,0 +1,50 @@
|
||||
# FLORIDA: check of the labels from 1 to 11 October
|
||||
|
||||
You asked me to check the 20 existing labels of the range: keep, correct, remove or add.
|
||||
|
||||
## In short
|
||||
|
||||
Most labels hold. Five are corrected and four are added. All of them concern the two references of the station: when one of them is poorly seen, every target moves on the curves. No real movement of the structure is seen. The curves can be trusted outside the labelled moments.
|
||||
|
||||
## Verification
|
||||
|
||||
Kept 15, corrected 5, removed 0, added 4.
|
||||
|
||||
- FLORIDA-4: start moved from 20:45 to 20:30. At 20:45 the errors already rise and the curves already shift. Text made more precise: no camera registration from 21:00.
|
||||
- FLORIDA-6: cause now "seen". On the 10:00 thumbnail, the sun lights the background behind r1_r and its spot is lost in it.
|
||||
- FLORIDA-7: text corrected. At 10:45 the other targets do jump for one measurement, with p1_r; this is a new label.
|
||||
- FLORIDA-9: bounds widened from 20:45–22:30 to 18:30–23:30. r1_r loses light from 18:45 and slides; then p1_r flickers until 23:15.
|
||||
- FLORIDA-20: cause now "seen". On 9 October at 10:00, the sun lights the background behind r1_r.
|
||||
- Added: 2/10 08:30–09:45 (r1_r almost invisible after the rain); 2/10 10:30–11:00 (p1_r for one measurement); 2/10 18:00–18:30 (Massif 2, one point); 4/10 08:30–09:00 (one-measurement jump, cause not established).
|
||||
- Spanning labels FLORIDA-1 and FLORIDA-14: nothing wrong within the range.
|
||||
|
||||
## What happened
|
||||
|
||||
**The references are poorly seen, and the targets jump.** The station has only two reference prisms. When one of them is poorly seen, its error passes into all the targets. This happens on the morning and the evening of 2 October after the night of rain, when r1_r is faint (likely to confirmed). It also happens around 10:00 on sunny days, when the sun lights the wall behind r1_r (confirmed on the thumbnails). Shifts are small to moderate, and the curves come back each time.
|
||||
|
||||

|
||||
|
||||
At 09:00 the r1_r spot is almost gone, and at 10:00 its background is sunlit. Compare with 11:00 and with the 3rd at 09:00.
|
||||
|
||||
## What to do
|
||||
|
||||
Nothing on the structure. The station has only two references, which makes it fragile. A third reference out of the sun would make it more robust.
|
||||
|
||||
## Not established
|
||||
|
||||
The one-measurement jump on 4 October at 08:45 has no visible cause, because there is no image at that minute.
|
||||
|
||||
## Labels
|
||||
|
||||
| Start (UTC) | End (UTC) | Family | Targets | In a few words |
|
||||
|---|---|---|---|---|
|
||||
| 01/10 20:30 | 02/10 08:45 | Visibility | all | night of rain (corrected start) |
|
||||
| 02/10 08:30 | 02/10 09:45 | Visibility | all, via r1_r | r1_r faint after the rain (added) |
|
||||
| 02/10 09:45 | 02/10 10:30 | Visibility | all, via r1_r | sun behind r1_r (cause corrected) |
|
||||
| 02/10 10:30 | 02/10 11:00 | Visibility | Sellette 4, 5, 6 | p1_r for one measurement (added) |
|
||||
| 02/10 10:30 | 02/10 11:45 | Visibility | Massif 2 | rejected (text corrected) |
|
||||
| 02/10 18:00 | 02/10 18:30 | Visibility | Massif 2 | one point (added) |
|
||||
| 02/10 18:30 | 02/10 23:30 | Visibility | all, via references | r1_r then p1_r at night (bounds corrected) |
|
||||
| 04/10 08:30 | 04/10 09:00 | Displacement | Sellette 5, Massif 2, Sellette 6 | one-measurement jump (added) |
|
||||
| 09/10 09:45 | 09/10 10:15 | Visibility | all, via r1_r | sun behind r1_r (cause corrected) |
|
||||
| other 15 | | | | kept unchanged |
|
||||
@@ -0,0 +1,6 @@
|
||||
{
|
||||
"station": "FLORIDA",
|
||||
"start": "2026-10-01T00:00Z",
|
||||
"end": "2026-10-11T09:45Z",
|
||||
"hints": "Verify the existing labels of the range (work/existing.jsonl): keep, correct, remove, add."
|
||||
}
|
||||
@@ -0,0 +1,47 @@
|
||||
"""Dump per instant: pose, and per sensor corr_x, corr_y (minus the sensor median over the window), error_value (r = rejected).
|
||||
Usage: python3 dump.py START END [OUT]"""
|
||||
import sys, statistics
|
||||
sys.path.insert(0, "tools/scripts")
|
||||
import data
|
||||
|
||||
F = "data/FLORIDA"
|
||||
S, E = data.parse_time(sys.argv[1]), data.parse_time(sys.argv[2])
|
||||
W0, W1 = data.parse_time("2026-10-01T00:00Z"), data.parse_time("2026-10-11T09:45Z")
|
||||
ms = data.load(F)
|
||||
cam = {p["t"].replace(second=0, microsecond=0): p for p in data.load_camera(F)}
|
||||
order = ["p1_r", "r1_r", "Massif 2", "Pont Ernen", "Sellette 3", "Sellette 4", "Sellette 5", "Sellette 6"]
|
||||
short = {"p1_r": "p1", "r1_r": "r1", "Massif 2": "M2", "Pont Ernen": "PE", "Sellette 3": "S3", "Sellette 4": "S4", "Sellette 5": "S5", "Sellette 6": "S6"}
|
||||
lev = {}
|
||||
for s in order:
|
||||
w = data.filter_window(ms[s], W0, W1)
|
||||
lev[s] = tuple(statistics.median([m[c] for m in w if m[c] is not None]) for c in ("corr_x", "corr_y"))
|
||||
by = {}
|
||||
for s in order:
|
||||
for m in data.filter_window(ms[s], S, E):
|
||||
by.setdefault(m["t"], {})[s] = m
|
||||
tg = ["Massif 2", "Sellette 4", "Sellette 5", "Sellette 6", "Pont Ernen", "Sellette 3"]
|
||||
hdr = "time pan tilt rot scale | " + " | ".join(f"{short[s]:>2} cx cy ev" for s in tg) + " | p1 ev r1 ev"
|
||||
out = [hdr]
|
||||
for t in sorted(by):
|
||||
p = cam.get(t.replace(second=0, microsecond=0))
|
||||
ps = f"{p['pan']:7.4f} {p['tilt']:7.4f} {p['rotation']:7.4f} {p['scale']:.5f}" if p else " --- no pose --- "
|
||||
cells = []
|
||||
for s in tg:
|
||||
m = by[t].get(s)
|
||||
if not m:
|
||||
cells.append(" missing "); continue
|
||||
r = "r" if data.rejected(m) else " "
|
||||
if m["corr_x"] is None:
|
||||
cells.append(f" - - {m['error_value']:.2f}{r}")
|
||||
else:
|
||||
cells.append(f"{m['corr_x']-lev[s][0]:+.2f} {m['corr_y']-lev[s][1]:+.2f} {m['error_value']:.2f}{r}")
|
||||
refs = []
|
||||
for s in ("p1_r", "r1_r"):
|
||||
m = by[t].get(s)
|
||||
refs.append(f"{m['error_value']:.2f}{'r' if data.rejected(m) else ' '}" if m else " - ")
|
||||
out.append(f"{data.iso(t)[5:16]} {ps} | " + " | ".join(cells) + " | " + " ".join(refs))
|
||||
txt = "\n".join(out)
|
||||
if len(sys.argv) > 3:
|
||||
open(sys.argv[3], "w").write(txt + "\n")
|
||||
else:
|
||||
print(txt)
|
||||
@@ -0,0 +1,43 @@
|
||||
"""Instants not covered by a label (labels file given) where a sensor is rejected or its corr deviates by more than K noises
|
||||
from its rolling median (+-6 h, without it). Target issue labels cover only their target (named in the description).
|
||||
Usage: python3 uncovered.py LABELS.jsonl [K]"""
|
||||
import sys, json, statistics
|
||||
sys.path.insert(0, "tools/scripts")
|
||||
import data
|
||||
F = "data/FLORIDA"
|
||||
W0, W1 = data.parse_time("2026-10-01T00:00Z"), data.parse_time("2026-10-11T09:45Z")
|
||||
K = float(sys.argv[2]) if len(sys.argv) > 2 else 4
|
||||
labs = [json.loads(l) for l in open(sys.argv[1])]
|
||||
for l in labs:
|
||||
l["s"], l["e"] = data.parse_time(l["start"]), data.parse_time(l["end"])
|
||||
ms = data.load(F)
|
||||
def covered(t, sensor):
|
||||
for l in labs:
|
||||
if l["s"] <= t <= l["e"]:
|
||||
if l["family"] == "Target issue":
|
||||
if l["description"].startswith(sensor):
|
||||
return True
|
||||
else:
|
||||
return True
|
||||
return False
|
||||
for s, mm in ms.items():
|
||||
w = [m for m in data.filter_window(mm, W0, W1)]
|
||||
for c in ("corr_x", "corr_y"):
|
||||
vals = [(m["t"].replace(second=0, microsecond=0), m[c]) for m in w if m[c] is not None]
|
||||
if len(vals) < 10:
|
||||
continue
|
||||
diffs = [abs(vals[i + 1][1] - vals[i][1]) for i in range(len(vals) - 1)]
|
||||
noise = statistics.median(diffs) or 1e-9
|
||||
if noise < 1e-6:
|
||||
continue
|
||||
for i, (t, v) in enumerate(vals):
|
||||
nb = [x for (tt, x) in vals if 0 < abs((tt - t).total_seconds()) <= 6 * 3600]
|
||||
if len(nb) < 5:
|
||||
continue
|
||||
d = (v - statistics.median(nb)) / noise
|
||||
if abs(d) > K and not covered(t, s):
|
||||
print(f"{data.iso(t)} {s:10} {c} dev {d:+.1f} noises ({v - statistics.median(nb):+.3f})")
|
||||
for m in w:
|
||||
t = m["t"].replace(second=0, microsecond=0)
|
||||
if data.rejected(m) and not covered(t, s):
|
||||
print(f"{data.iso(t)} {s:10} REJECTED ev {m['error_value']:.2f}")
|
||||
Reference in new issue
Block a user