English: label map, families, labeling rules, knowledge/, validate.py (ex controle.py), ids.py, precedents.py; the labels of auto/ translated, keys start/end/family/review/analysis (manual/: keys only); analysis folders renamed; the 2026-11-16 trial analysis (NORDEND-243)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
This commit is contained in:
maximeandClaude Opus 5.5 committed 2026-11-16 12:40:03 +01:00
1 parent 4d926ecddc
commit 68a0eefd8b
79 files changed
+2789 -2652

No files matched your search

+43 -43
View File
@@ -1,43 +1,43 @@
{"id": "CLARIDEN-1", "debut": "2026-10-01T00:00Z", "fin": "2026-11-01T00:00Z", "categorie": "Target issue", "description": "La cible P-300-B est rejetée à chaque mesure du lot : son erreur de reconnaissance reste presque à 1, sa courbe corrigée manque sur tout le mois. Cela dure depuis le 29 septembre en fin d'après-midi, l'heure où l'erreur de reconnaissance d'autres cibles, dont sa voisine P-301-B, change elle aussi de niveau d'un coup : un réglage de la station changé ce jour-là. Sur les vignettes (le 1er, le 15 et le 31), la tache du prisme est nette et brillante, mais à côté de la position où le système la cherche : la cible paraît mal configurée ou mal positionnée, pas cachée. Courbe à ignorer ; corriger la position de la cible dans la configuration ou vérifier le prisme.", "revue": "2026-11-04"}
{"id": "CLARIDEN-2", "debut": "2026-10-01T06:15Z", "fin": "2026-10-01T08:45Z", "categorie": "Visibility", "description": "L'erreur de reconnaissance de la plupart des cibles monte ensemble, d'abord un peu, puis nettement vers 07:50-08:00, et redescend ; dans le même temps les courbes corrigées de plusieurs cibles font une bosse qui revient : D-301-C en horizontal, D-302-B et PR_BG (même prisme) en vertical, D-306-B, D-303-B, P-301-B, puis vers 08:00 D-301-A, D-302_A, D-304-A. La scène se déforme un peu (échelle et rotation des cibles, références PR-291 et PR-293 qui s'écartent des cibles), sans mouvement de la caméra. Rien sur les images de 07:00 et 08:00, toujours sombres. Gêne diffuse de la vue dans le tunnel, de cause non établie (l'air du tunnel ?) ; même signature que les épisodes des 2, 6, 18, 22 et 31 octobre. L'ouvrage ne bouge pas : ne pas croire les courbes sur la plage.", "revue": "2026-11-04"}
{"id": "CLARIDEN-3", "debut": "2026-10-01T17:45Z", "fin": "2026-10-02T02:30Z", "categorie": "Displacement", "description": "Les cibles basses de la rangée B descendent en vertical à partir de 18:00 : D-306-B surtout, qui continue à descendre jusque dans la nuit puis reste basse jusqu'au trou du 3 octobre, D-304-B et D-303-B (qui, elle, remonte peu à peu jusqu'au 3). Positions brutes presque immobiles, pas de mouvement de la caméra, erreur de reconnaissance ordinaire, pas d'image qui montre une cause. Cause non établie, dans un tunnel en chantier : un mouvement de ces cibles n'est pas exclu. À vérifier avec les autres mesures du chantier ; surveiller cette rangée.", "revue": "2026-11-04"}
{"id": "CLARIDEN-4", "debut": "2026-10-02T21:45Z", "fin": "2026-10-02T23:00Z", "categorie": "Visibility", "description": "L'erreur de reconnaissance de la plupart des cibles monte ensemble pendant une heure, et les courbes corrigées de D-304-B (vertical) surtout, de D-301-C (horizontal), D-302-B et PR_BG, P-301-B, D-304-C font une bosse qui revient ; D-304-B est encore décalée à la dernière mesure, avant 23:00. La température du boîtier de la caméra baisse nettement à la même heure. Rien de visible sur l'image de 22:00. Gêne diffuse de la vue, de cause non établie, peut-être un changement de l'air du tunnel. L'ouvrage ne bouge pas : courbes à ignorer sur la plage.", "revue": "2026-11-04"}
{"id": "CLARIDEN-5", "debut": "2026-10-02T21:50Z", "fin": "2026-10-02T23:20Z", "categorie": "Thermal displacement", "description": "La température du boîtier de la caméra baisse nettement pendant une heure, et l'échelle de la caméra s'écarte avec elle, puis revient quand le boîtier se réchauffe ; l'écart le plus fort vient après le retour des courbes de la gêne de la vue du même soir. Les courbes corrigées ne suivent pas cet écart : la compensation l'absorbe. Mouvement de la caméra par effet thermique, déduit de sa pose face à la température du boîtier ; normal, rien à faire.", "revue": "2026-11-04"}
{"id": "CLARIDEN-6", "debut": "2026-10-03T07:40Z", "fin": "2026-10-03T08:00Z", "categorie": "No data", "description": "Une mesure manque, pour tous les capteurs : les courbes ont un court trou. Cause non établie.", "revue": "2026-11-04"}
{"id": "CLARIDEN-7", "debut": "2026-10-03T17:30Z", "fin": "2026-10-03T17:45Z", "categorie": "Visibility", "description": "Dernière mesure avant le trou du 3 octobre : la même bosse d'une mesure sur D-301-C, D-302-B et PR_BG, D-304-B, D-304-C, P-301-B, avec l'erreur de reconnaissance de nombreuses cibles qui monte. Même signature que les épisodes de gêne de la vue de la station ; cause non établie, peut-être liée à l'arrêt de la station qui suit. Point à ignorer.", "revue": "2026-11-04"}
{"id": "CLARIDEN-8", "debut": "2026-10-03T17:45Z", "fin": "2026-10-05T10:30Z", "categorie": "No data", "description": "Aucune mesure ni image pendant près de deux jours, pour tous les capteurs, et les métriques de la station manquent aussi : la station entière s'est arrêtée. Tension et batterie normales avant et après le trou, donc pas la signature d'une coupure d'alimentation ; à la reprise, la caméra a bougé et un objet flou est tout près de l'objectif (image de 10:30), ce qui fait penser à une intervention sur la station. Cause non établie : les courbes manquent sur la plage.", "revue": "2026-11-04"}
{"id": "CLARIDEN-9", "debut": "2026-10-03T17:45Z", "fin": "2026-10-05T10:45Z", "categorie": "Displacement", "description": "Après le trou du 3 au 5 octobre, de nombreuses cibles reprennent à un autre niveau, et ne reviennent pas à celui d'avant jusqu'à la fin du lot : D-304-C et D-303-C surtout, dans les deux directions, puis D-302_A et D-301-A, P-299-B, D-300-C, D-303-B et D-304-B en horizontal, D-301-C en vertical ; D-306-B, elle, revient à son niveau d'avant sa descente du 1er au soir. Les positions brutes de D-304-C et D-303-C ont bougé dans l'image par rapport aux autres, l'erreur de reconnaissance de plusieurs cibles (D-302-C, D-301-C, D-303-C, D-304-C, D-301-A, D-306-B) change aussi de niveau, et l'échelle de la caméra n'est plus la même : l'aspect de ces cibles et la pose de la caméra ont changé pendant l'arrêt. À la reprise, un objet flou est tout près de l'objectif (image de 10:30). Cause non établie : intervention ou réglage changé pendant l'arrêt, ou vrai mouvement ; à vérifier avant de croire ces nouveaux niveaux.", "revue": "2026-11-04"}
{"id": "CLARIDEN-10", "debut": "2026-10-05T10:30Z", "fin": "2026-10-05T11:20Z", "categorie": "Obstruction", "description": "Première mesure après le trou : toute la scène, références comprises, est décalée de plusieurs pixels dans l'image et la caméra est inclinée, puis elle revient en vingt minutes ; la compensation l'absorbe mal le temps d'une mesure, et les courbes corrigées de nombreuses cibles sautent puis reviennent (D-303-C, D-302-B et PR_BG, D-306-B, D-304-B, P-299-C surtout ; D-303-B reste un peu décalée jusqu'à 11:10). D-304-C est rejetée. L'image de 10:30 montre un grand objet flou tout près de l'objectif, à droite, qui cache D-304-C, et un ouvrier en vêtements réfléchissants dans le tunnel, en haut à gauche : on travaille autour de la caméra. Points à ignorer ; l'ouvrage ne bouge pas.", "revue": "2026-11-04"}
{"id": "CLARIDEN-11", "debut": "2026-10-05T12:10Z", "fin": "2026-10-05T12:30Z", "categorie": "Obstruction", "description": "Le temps d'une mesure, toute la rangée C de droite (D-300-C, D-301-C, D-303-C, D-304-C, P-298-C, P-299-C) et la référence D-302-C sont rejetées, leur erreur de reconnaissance presque à 1 ; la compensation tourne sans D-302-C et les cibles restées sous le seuil sautent puis reviennent à la mesure suivante (D-306-B surtout en vertical, D-303-B, D-304-B, P-299-B, P-301-B, D-302-B et PR_BG). Pas d'image à 12:20 : la cause n'est pas vue, mais la signature est celle d'un passage devant la partie droite de la scène. Point à ignorer.", "revue": "2026-11-04"}
{"id": "CLARIDEN-12", "debut": "2026-10-06T18:00Z", "fin": "2026-10-06T22:10Z", "categorie": "Visibility", "description": "Pendant quatre heures, les courbes corrigées du même groupe de cibles prennent un palier qui commence et finit net : D-301-C en horizontal surtout, D-302-B et PR_BG (même prisme) en horizontal puis en vertical, D-304-B en vertical, et par moments P-301-B, D-303-B, D-302_A, D-301-A, D-304-C. L'erreur de reconnaissance des références PR-293, PR-295, PR-296 et de quelques cibles monte un peu ; les références s'écartent les unes des autres dans l'image. La température du boîtier de la caméra baisse nettement sur ces heures. Rien de visible sur l'image de 20:00. Gêne de la vue de cause non établie, sans doute l'air du tunnel (plus froid) ; les courbes et l'erreur de reconnaissance reviennent à 22:00, avant l'échelle de la caméra (voir l'étiquette thermique de la même soirée). L'ouvrage ne bouge pas : courbes à ignorer sur la plage.", "revue": "2026-11-04"}
{"id": "CLARIDEN-13", "debut": "2026-10-06T18:40Z", "fin": "2026-10-06T22:40Z", "categorie": "Thermal displacement", "description": "La température du boîtier de la caméra baisse nettement pendant quatre heures, et l'échelle de la caméra s'écarte avec elle, puis revient quand le boîtier se réchauffe, après le retour des courbes de la gêne de la vue de la même soirée. Les courbes corrigées ne suivent pas cet écart : la compensation l'absorbe. Mouvement de la caméra par effet thermique, déduit de sa pose face à la température du boîtier ; normal, rien à faire.", "revue": "2026-11-04"}
{"id": "CLARIDEN-14", "debut": "2026-10-06T22:00Z", "fin": "2026-10-11T06:00Z", "categorie": "Displacement", "description": "Dérive lente de plusieurs cibles pendant quatre jours, faite de petits pas, puis stabilisation : D-303-B monte en vertical, D-303-C et D-304-C montent en vertical, D-301-C monte en horizontal, D-306-B descend en horizontal. Pas de mouvement de la caméra, erreur de reconnaissance ordinaire, rien sur les images ; la position dans l'image de D-301-C et de D-303-B s'écarte un peu de celle des autres cibles, dans le sens de leurs courbes. La température du boîtier de la caméra reste presque constante sur ces jours : pas de lien avec elle. Retour lent du 11 au 19, étiqueté à part. Cause non établie, dans un tunnel en chantier : un mouvement de ces cibles n'est pas exclu. À vérifier avec les autres mesures du chantier ; surveiller cette rangée.", "revue": "2026-11-04"}
{"id": "CLARIDEN-15", "debut": "2026-10-11T06:00Z", "fin": "2026-10-20T00:20Z", "categorie": "Displacement", "description": "Les cibles de la rangée C reviennent lentement en arrière après leur dérive du 6 au 11 : D-301-C redescend en horizontal du 11 au 15, D-304-C et D-303-C redescendent en vertical du 12 au 19, jusqu'au saut de la caméra du 20 peu après minuit. Pas de mouvement de la caméra pendant ces jours, rien devant les cibles sur l'image du 13 à 12:00. La position dans l'image de D-301-C revient elle aussi en partie vers celle des autres cibles. La température du boîtier de la caméra reste presque constante sur ces jours : pas de lien avec elle. C'est le retour de la dérive du 6 au 11, étiquetée à part. Cause non établie, dans un tunnel en chantier : un mouvement de ces cibles n'est pas exclu. À vérifier avec les autres mesures du chantier ; surveiller cette rangée.", "revue": "2026-11-04"}
{"id": "CLARIDEN-16", "debut": "2026-10-15T22:45Z", "fin": "2026-10-16T10:30Z", "categorie": "No data", "description": "Aucune mesure ni image pendant près de douze heures, la nuit du 15 au 16, et aucune métrique de la station. Le trou commence à la même heure, vers 23:00, sur les neuf stations qui mesuraient alors (LENZSPITZE n'a ses premières mesures qu'au milieu de cette nuit, WILDSTRUBEL est déjà arrêtée), et leurs métriques s'arrêtent en même temps sur la plupart ; mesures et métriques reprennent à des heures différentes selon la station, la plupart en fin de matinée. JUNGFRAU, dont les métriques continuent, accumule toute la nuit des entrées non envoyées, parties en fin de matinée, et ses mesures de la nuit manquent pourtant aux données : une cause commune hors des stations (transmission ou réception des données), pas une coupure des stations ; elle n'est pas établie. En plus, à CLARIDEN, la station repart sur sa batterie : la tension reste bien sous son niveau habituel, sans charge, jusqu'en début d'après-midi, puis la charge reprend ; son alimentation a manqué aussi cette nuit-là. Les courbes manquent sur la plage ; vérifier l'alimentation du chantier si cela se répète.", "revue": "2026-11-04"}
{"id": "CLARIDEN-17", "debut": "2026-10-16T14:20Z", "fin": "2026-10-16T14:40Z", "categorie": "No data", "description": "Une mesure manque, pour tous les capteurs, quelques heures après la reprise du 16 : les courbes ont un court trou ; tension normale autour. Le même trou tombe au même moment sur les autres stations qui mesurent à ce moment (FLORIDA, LENZSPITZE, NORDEND, SNCF01) : une cause commune hors de la station (transmission ou réception des données), pas une panne de la station ; elle n'est pas établie. Les courbes manquent sur la plage ; rien à faire sur la station.", "revue": "2026-11-04"}
{"id": "CLARIDEN-18", "debut": "2026-10-18T09:00Z", "fin": "2026-10-18T09:30Z", "categorie": "Visibility", "description": "Le temps de deux mesures, l'erreur de reconnaissance de plusieurs cibles monte et les courbes corrigées de D-301-C (horizontal), D-302-B et PR_BG, P-301-B, D-302_A, D-304-B font une bosse qui revient. La température du boîtier de la caméra baisse à la même heure. Même signature que les autres épisodes de gêne de la vue de la station, cause non établie. Points à ignorer.", "revue": "2026-11-04"}
{"id": "CLARIDEN-19", "debut": "2026-10-18T13:45Z", "fin": "2026-10-18T23:30Z", "categorie": "No data", "description": "Aucune mesure ni image pendant près de dix heures, ni métrique de la station. À la reprise, la batterie est entamée et la tension basse, puis elles remontent : signature d'une coupure d'alimentation. Les courbes manquent sur la plage ; vérifier l'alimentation si cela se répète.", "revue": "2026-11-04"}
{"id": "CLARIDEN-20", "debut": "2026-10-19T09:00Z", "fin": "2026-10-19T10:15Z", "categorie": "No data", "description": "Quatre mesures manquent en une heure, pour tous les capteurs, entre des mesures isolées : les courbes ont des trous ; tension normale autour. Le même trou tombe au même moment sur les autres stations qui mesurent à ce moment (FLORIDA, JUNGFRAU, LENZSPITZE, NIEDERHORN, NORDEND, SNCF01) : une cause commune hors de la station (transmission ou réception des données), pas une panne de la station ; elle n'est pas établie. Les courbes manquent sur la plage ; rien à faire sur la station.", "revue": "2026-11-04"}
{"id": "CLARIDEN-21", "debut": "2026-10-19T20:45Z", "fin": "2026-10-19T21:30Z", "categorie": "No data", "description": "Trois mesures manquent en moins d'une heure, pour tous les capteurs : les courbes ont un trou ; tension normale autour. Le même trou tombe au même moment sur les autres stations qui mesurent à ce moment (FLORIDA, JUNGFRAU, LENZSPITZE, NIEDERHORN, NORDEND, SNCF01) : une cause commune hors de la station (transmission ou réception des données), pas une panne de la station ; elle n'est pas établie. Les courbes manquent sur la plage ; rien à faire sur la station. Les métriques horaires de BREITHORN, MICHIGAN et NEBRASKA manquent aussi à 21:00.", "revue": "2026-11-04"}
{"id": "CLARIDEN-22", "debut": "2026-10-20T00:15Z", "fin": "2026-10-20T00:45Z", "categorie": "Displacement", "description": "Toute la scène, références comprises, se décale d'un coup d'une fraction de pixel dans l'image : la caméra a bougé. La compensation l'absorbe pour la plupart des cibles, mais D-306-B garde un saut en vertical qui reste, et D-303-C, D-302-B et PR_BG un plus petit. Cause du mouvement de la caméra non établie ; le saut de D-306-B n'est pas un mouvement de l'ouvrage établi : à vérifier.", "revue": "2026-11-04"}
{"id": "CLARIDEN-23", "debut": "2026-10-20T04:00Z", "fin": "2026-10-25T18:00Z", "categorie": "Displacement", "description": "Dérive lente de cibles de la rangée C, puis stabilisation à un nouveau niveau : D-301-C monte en horizontal dès le 20, D-304-C et D-303-C montent en vertical surtout à partir du 22. Pas de mouvement de la caméra, erreur de reconnaissance ordinaire. La montée de D-301-C commence avant les travaux vus autour de la station le 22 (ouvriers et cadre) : pas de lien établi. La position dans l'image de D-301-C, de D-304-C et de D-303-C s'écarte nettement de celle des autres cibles, dans le sens de leurs courbes. La température du boîtier de la caméra reste presque constante sur ces jours : pas de lien avec elle. Retour partiel du 26 au 29, étiqueté à part. Cause non établie, dans un tunnel en chantier : un mouvement de ces cibles n'est pas exclu. À vérifier avec les autres mesures du chantier ; surveiller cette rangée.", "revue": "2026-11-04"}
{"id": "CLARIDEN-24", "debut": "2026-10-20T06:10Z", "fin": "2026-10-20T06:30Z", "categorie": "No data", "description": "Une mesure manque, pour tous les capteurs : les courbes ont un court trou ; la station synchronise pourtant à cet instant, tension normale. Le même instant manque aussi à LENZSPITZE, et à aucune autre station : une cause commune hors de la station est possible, non établie. Rien à faire.", "revue": "2026-11-04"}
{"id": "CLARIDEN-25", "debut": "2026-10-20T20:45Z", "fin": "2026-10-20T21:45Z", "categorie": "No data", "description": "Cinq mesures manquent en une heure, pour tous les capteurs : les courbes ont un trou. La station tourne pourtant (synchronisations continues, image de 21:00, tension normale) : la mesure n'est pas faite ou pas enregistrée. La mesure de 21:00 manque aussi à NIEDERHORN, et à aucune autre station : une cause commune est possible, non établie. Rien à faire.", "revue": "2026-11-04"}
{"id": "CLARIDEN-26", "debut": "2026-10-22T06:30Z", "fin": "2026-10-22T08:45Z", "categorie": "Visibility", "description": "En deux temps, de 06:40 à 06:50 puis de 07:50 à 08:30, l'erreur de reconnaissance de plusieurs cibles et des références D-302-C et PR-293 monte, et les courbes corrigées du groupe habituel font une bosse qui revient : D-301-C en horizontal, D-302-B et PR_BG en vertical, P-301-B, D-304-B, D-304-C, et au début D-302_A, P-298-A, D-304-A, D-303-A ; entre les deux, D-302-B et PR_BG bougent encore une fois. La température du boîtier de la caméra baisse pendant ces heures. L'image de 08:00 montre des lumières au fond du tunnel (engin ou véhicule), rien devant les cibles. Gêne diffuse de la vue de cause non établie, la même que celle des autres épisodes de la station. Courbes à ignorer sur la plage ; l'ouvrage ne bouge pas.", "revue": "2026-11-04"}
{"id": "CLARIDEN-27", "debut": "2026-10-22T08:00Z", "fin": "2026-10-22T09:20Z", "categorie": "Thermal displacement", "description": "La température du boîtier de la caméra baisse nettement le matin du 22, et l'échelle de la caméra s'écarte avec elle, surtout après le retour des courbes de la gêne de la vue de la même heure, puis revient quand le boîtier se réchauffe. Les courbes corrigées ne suivent pas cet écart : la compensation l'absorbe. Mouvement de la caméra par effet thermique, déduit de sa pose face à la température du boîtier ; normal, rien à faire.", "revue": "2026-11-04"}
{"id": "CLARIDEN-28", "debut": "2026-10-22T08:45Z", "fin": "2026-10-22T17:00Z", "categorie": "Displacement", "description": "Les cibles basses de la rangée B montent en vertical pendant la journée : D-306-B surtout, D-302-B et PR_BG, D-304-B, D-303-B ; l'erreur de reconnaissance de quelques-unes monte un peu. Des ouvriers sont visibles dans le tunnel sur l'image de 12:00, et un cadre apparaît tout près de la caméra en haut de l'image à 13:00 (il y reste jusqu'à la fin du lot) : travaux autour de la station. La position dans l'image de D-306-B monte un peu par rapport aux autres cibles, dans le sens de sa courbe. Le lien entre ces travaux et la montée n'est pas établi. Redescente du soir, étiquetée à part. Cause non établie, dans un tunnel en chantier : un mouvement de ces cibles n'est pas exclu. À vérifier avec les autres mesures du chantier ; surveiller cette rangée.", "revue": "2026-11-04"}
{"id": "CLARIDEN-29", "debut": "2026-10-22T17:00Z", "fin": "2026-10-23T10:30Z", "categorie": "Displacement", "description": "Les cibles basses de la rangée B redescendent en vertical, d'un coup le soir du 22 puis plus lentement le matin du 23, jusque sous leur niveau d'avant leur montée de la journée : D-306-B surtout, D-304-B, D-303-B, D-302-B et PR_BG. Pas de mouvement de la caméra ; le cadre installé le 22 reste en haut de l'image (image de 19:00), rien d'autre. La position dans l'image de D-306-B descend elle aussi par rapport aux autres cibles. C'est le retour de la montée de la journée, étiquetée à part, et il va au-delà. Cause non établie, dans un tunnel en chantier : un mouvement de ces cibles n'est pas exclu. À vérifier avec les autres mesures du chantier ; surveiller cette rangée.", "revue": "2026-11-04"}
{"id": "CLARIDEN-30", "debut": "2026-10-24T01:00Z", "fin": "2026-10-24T05:00Z", "categorie": "Displacement", "description": "Les cibles basses de la rangée B (D-306-B surtout, D-304-B, D-303-B) remontent en partie en vertical dans la nuit du 24, vers leur niveau d'avant la descente du 22 au soir, sans le rejoindre. Pas de mouvement de la caméra. Cause non établie, dans un tunnel en chantier : un mouvement de ces cibles n'est pas exclu. À vérifier avec les autres mesures du chantier ; surveiller cette rangée.", "revue": "2026-11-04"}
{"id": "CLARIDEN-31", "debut": "2026-10-24T18:20Z", "fin": "2026-10-25T19:10Z", "categorie": "Displacement", "description": "Les cibles de gauche de la rangée A (D-302_A, D-303-A, D-304-A, D-301-A, P-299-A) et D-304-B, D-306-B, P-301-B s'agitent par à-coups (vers 18:30 et 21:30 le 24, 07:00 et 15:30 le 25) : le vertical monte, l'horizontal descend ; l'erreur de reconnaissance de ces cibles et de la référence D-302-C monte pendant les premiers à-coups, et les références PR-291 et PR-293 s'écartent un peu des cibles dans l'image. Tout se calme le 25 au soir. Après l'agitation, l'horizontal des cibles A reste décalé jusqu'à la fin du lot. Des ouvriers sont visibles sur l'image du 24 à 15:00 et le cadre est toujours en haut de l'image. Cause non établie : décalage à vérifier.", "revue": "2026-11-04"}
{"id": "CLARIDEN-32", "debut": "2026-10-25T18:00Z", "fin": "2026-10-29T04:00Z", "categorie": "Displacement", "description": "Après leur montée du 20 au 25, D-304-C et D-303-C redescendent lentement en vertical du 26 au 29, sans revenir à leur niveau d'avant la montée, puis se stabilisent. Pas de mouvement de la caméra, rien devant les cibles sur les images du 28 à 19:00 et 20:00. Leur position dans l'image revient elle aussi en partie vers celle des autres cibles. C'est le retour partiel de la montée du 20 au 25, étiquetée à part. Cause non établie, dans un tunnel en chantier : un mouvement de ces cibles n'est pas exclu. À vérifier avec les autres mesures du chantier ; surveiller cette rangée.", "revue": "2026-11-04"}
{"id": "CLARIDEN-33", "debut": "2026-10-26T14:30Z", "fin": "2026-10-26T15:15Z", "categorie": "No data", "description": "Trois mesures manquent en moins d'une heure, pour tous les capteurs : les courbes ont un trou ; tension normale autour. Le même trou tombe au même moment sur les autres stations qui mesurent à ce moment (FLORIDA, JUNGFRAU, LENZSPITZE, NIEDERHORN, NORDEND, SNCF01), et leurs métriques manquent aussi aux mêmes minutes : une cause commune hors de la station (transmission ou réception des données), pas une panne de la station ; elle n'est pas établie. Les courbes manquent sur la plage ; rien à faire sur la station. Les métriques horaires de BREITHORN, MICHIGAN et NEBRASKA manquent aussi à 15:00.", "revue": "2026-11-04"}
{"id": "CLARIDEN-34", "debut": "2026-10-27T09:00Z", "fin": "2026-10-27T09:30Z", "categorie": "No data", "description": "Deux mesures manquent, pour tous les capteurs : les courbes ont un court trou ; tension normale autour. Le même trou tombe au même moment sur les autres stations qui mesurent à ce moment (FLORIDA, JUNGFRAU, LENZSPITZE, NORDEND) : une cause commune hors de la station (transmission ou réception des données), pas une panne de la station ; elle n'est pas établie. Les courbes manquent sur la plage ; rien à faire sur la station.", "revue": "2026-11-04"}
{"id": "CLARIDEN-35", "debut": "2026-10-27T12:00Z", "fin": "2026-10-27T12:20Z", "categorie": "Target issue", "description": "Le temps d'une mesure, la cible PR-284 saute de plusieurs pixels en horizontal et en vertical, puis revient : la position mesurée a quitté sa tache, avec une erreur de reconnaissance haute mais sous le seuil, donc gardée dans la courbe. Depuis le 24 octobre vers 14:20, la tache de PR-284 est nettement plus faible (vignettes du 24 à 12:00 et 16:00, du 27 à 12:00) et son erreur de reconnaissance est restée haute. Point faux à ignorer ; regarder l'état de la cible PR-284 si les faux points se répètent.", "revue": "2026-11-04"}
{"id": "CLARIDEN-36", "debut": "2026-10-28T19:20Z", "fin": "2026-10-28T20:10Z", "categorie": "Displacement", "description": "Le soir du 28, les cibles basses de la rangée B descendent d'un pas en vertical, D-306-B surtout, puis D-304-B, et restent à ce nouveau niveau jusqu'à la fin du lot ; D-303-B et D-304-B baissent aussi un peu en horizontal. La position dans l'image de D-306-B descend un peu par rapport aux autres cibles, pas de mouvement de la caméra, rien sur les images de 19:00 et 20:00 (le cadre en haut de l'image est toujours là). Cause non établie, dans un tunnel en chantier : un mouvement de ces cibles n'est pas exclu. À vérifier avec les autres mesures du chantier ; surveiller cette rangée.", "revue": "2026-11-04"}
{"id": "CLARIDEN-37", "debut": "2026-10-29T14:50Z", "fin": "2026-10-29T15:10Z", "categorie": "No data", "description": "Une mesure manque, pour tous les capteurs : les courbes ont un court trou ; la station synchronise pourtant à cet instant, tension normale. Le même trou tombe au même moment sur les autres stations qui mesurent à ce moment (LENZSPITZE, NORDEND, SNCF01) : une cause commune hors de la station (transmission ou réception des données), pas une panne de la station ; elle n'est pas établie. Les courbes manquent sur la plage ; rien à faire sur la station.", "revue": "2026-11-04"}
{"id": "CLARIDEN-38", "debut": "2026-10-29T23:45Z", "fin": "2026-10-30T00:15Z", "categorie": "Target issue", "description": "À minuit, D-302-B saute en vertical et un peu en horizontal et reste à ce nouveau niveau jusqu'à la fin du lot ; PR_BG, sur le même prisme, saute en sens inverse. Les positions brutes des deux capteurs ne bougent pas, seule leur position de départ a changé (le déplacement relatif saute sans mouvement dans l'image) : un changement de configuration ou de traitement de ces deux capteurs, pas un mouvement de l'ouvrage. Vérifier leur configuration avec l'exploitant ; ne pas lire ce saut comme un mouvement, ni comparer leurs courbes d'avant et d'après.", "revue": "2026-11-04"}
{"id": "CLARIDEN-39", "debut": "2026-10-30T17:00Z", "fin": "2026-10-30T17:45Z", "categorie": "No data", "description": "Quatre mesures manquent en moins d'une heure, pour tous les capteurs : les courbes ont un trou. Cause non établie.", "revue": "2026-11-04"}
{"id": "CLARIDEN-40", "debut": "2026-10-31T13:45Z", "fin": "2026-10-31T15:10Z", "categorie": "Visibility", "description": "Pendant une heure, les courbes corrigées du groupe habituel font une bosse qui revient : D-301-C (horizontal), D-302-B et PR_BG (vertical), D-301-A, D-300-A, D-304-B, D-304-C, D-302_A, et un instant la référence PR-295 ; l'erreur de reconnaissance de quelques capteurs monte pendant l'épisode. Même signature que les autres épisodes de gêne de la vue de la station ; cause non établie. Courbes à ignorer sur la plage.", "revue": "2026-11-04"}
{"id": "CLARIDEN-41", "debut": "2026-10-31T18:45Z", "fin": "2026-10-31T20:00Z", "categorie": "Visibility", "description": "Le temps de quelques mesures, les courbes corrigées de D-301-C, P-301-B, P-299-A, D-302-B et PR_BG, D-303-B font une bosse qui revient, et la référence PR-295, qui se voit moins bien dès 18:50, sort de son niveau ; elle est rejetée à 19:50 (sa courbe manque à cette mesure), sans que les cibles en bougent. Gêne de la vue de cause non établie ; points à ignorer.", "revue": "2026-11-04"}
{"id": "CLARIDEN-42", "debut": "2026-10-31T22:15Z", "fin": "2026-11-01T00:00Z", "categorie": "Visibility", "description": "La référence PR-295 se voit mal : sa tache est plus faible (vignette de 23:00), elle est rejetée par moments et, entre deux rejets, elle est mal mesurée ; la compensation change de base, et à 22:50 de nombreuses cibles sautent ensemble puis reviennent, sans mouvement de leurs positions brutes. Jusqu'à 23:50, les courbes de D-301-C, P-301-B, D-302-B et PR_BG restent décalées, puis repassent un instant de l'autre côté, avec l'erreur de reconnaissance de plusieurs cibles qui monte. La température du boîtier de la caméra baisse nettement à cette heure. Cause de la gêne non établie (même signature que les autres épisodes). Les sauts ne sont pas un mouvement : courbes à ignorer sur la plage.", "revue": "2026-11-04"}
{"id": "CLARIDEN-43", "debut": "2026-10-31T23:10Z", "fin": "2026-11-01T00:10Z", "categorie": "Thermal displacement", "description": "La température du boîtier de la caméra baisse nettement le soir du 31, et l'échelle de la caméra s'écarte avec elle, puis revient en partie quand le boîtier se réchauffe ; l'écart le plus fort vient quand les courbes de la gêne de la vue de la même heure reviennent. Les courbes corrigées ne suivent pas cet écart : la compensation l'absorbe. Mouvement de la caméra par effet thermique, déduit de sa pose face à la température du boîtier ; normal, rien à faire.", "revue": "2026-11-04"}
{"id": "CLARIDEN-1", "start": "2026-10-01T00:00Z", "end": "2026-11-01T00:00Z", "family": "Target issue", "description": "The target P-300-B is rejected at every measurement of the batch: its recognition error stays almost at 1, its corrected curve is missing over the whole month. This has lasted since 29 September in the late afternoon, the time when the recognition error of other targets, including its neighbor P-301-B, also changes level all at once: a station setting changed that day. On the thumbnails (the 1st, the 15th and the 31st), the prism spot is sharp and bright, but next to the position where the system looks for it: the target seems badly configured or badly positioned, not hidden. Curve to ignore; correct the position of the target in the configuration or check the prism.", "review": "2026-11-04"}
{"id": "CLARIDEN-2", "start": "2026-10-01T06:15Z", "end": "2026-10-01T08:45Z", "family": "Visibility", "description": "The recognition error of most targets rises together, first a little, then clearly around 07:50-08:00, and comes back down; at the same time the corrected curves of several targets make a bump that comes back: D-301-C horizontally, D-302-B and PR_BG (same prism) vertically, D-306-B, D-303-B, P-301-B, then around 08:00 D-301-A, D-302_A, D-304-A. The scene deforms a little (scale and rotation of the targets, references PR-291 and PR-293 moving away from the targets), without camera movement. Nothing on the 07:00 and 08:00 images, which are dark as always. Diffuse obstruction of the view in the tunnel, cause not established (the tunnel air?); same signature as the episodes of 2, 6, 18, 22 and 31 October. The structure does not move: do not trust the curves over the range.", "review": "2026-11-04"}
{"id": "CLARIDEN-3", "start": "2026-10-01T17:45Z", "end": "2026-10-02T02:30Z", "family": "Displacement", "description": "The low targets of row B go down vertically from 18:00: D-306-B above all, which keeps going down into the night then stays low until the gap of 3 October, D-304-B and D-303-B (which, for its part, gradually rises until the 3rd). Raw positions almost motionless, no camera movement, ordinary recognition error, no image showing a cause. Cause not established, in a tunnel under construction: a movement of these targets is not excluded. To be checked against the other measurements of the site; monitor this row.", "review": "2026-11-04"}
{"id": "CLARIDEN-4", "start": "2026-10-02T21:45Z", "end": "2026-10-02T23:00Z", "family": "Visibility", "description": "The recognition error of most targets rises together for one hour, and the corrected curves of D-304-B (vertical) above all, of D-301-C (horizontal), D-302-B and PR_BG, P-301-B, D-304-C make a bump that comes back; D-304-B is still shifted at the last measurement, before 23:00. The camera housing temperature drops clearly at the same time. Nothing visible on the 22:00 image. Diffuse obstruction of the view, cause not established, perhaps a change in the tunnel air. The structure does not move: curves to ignore over the range.", "review": "2026-11-04"}
{"id": "CLARIDEN-5", "start": "2026-10-02T21:50Z", "end": "2026-10-02T23:20Z", "family": "Thermal displacement", "description": "The camera housing temperature drops clearly for one hour, and the camera scale deviates with it, then returns when the housing warms up; the strongest deviation comes after the curves have returned from the view obstruction of the same evening. The corrected curves do not follow this deviation: the compensation absorbs it. Camera movement by thermal effect, deduced from its pose against the housing temperature; normal, nothing to do.", "review": "2026-11-04"}
{"id": "CLARIDEN-6", "start": "2026-10-03T07:40Z", "end": "2026-10-03T08:00Z", "family": "No data", "description": "One measurement is missing, for all sensors: the curves have a short gap. Cause not established.", "review": "2026-11-04"}
{"id": "CLARIDEN-7", "start": "2026-10-03T17:30Z", "end": "2026-10-03T17:45Z", "family": "Visibility", "description": "Last measurement before the gap of 3 October: the same one-measurement bump on D-301-C, D-302-B and PR_BG, D-304-B, D-304-C, P-301-B, with the recognition error of many targets rising. Same signature as the episodes of view obstruction at the station; cause not established, perhaps linked to the station shutdown that follows. Point to ignore.", "review": "2026-11-04"}
{"id": "CLARIDEN-8", "start": "2026-10-03T17:45Z", "end": "2026-10-05T10:30Z", "family": "No data", "description": "No measurement or image for almost two days, for all sensors, and the station metrics are missing too: the entire station stopped. Voltage and battery normal before and after the gap, so not the signature of a power cut; on resumption, the camera has moved and a blurred object is very close to the lens (10:30 image), which suggests an intervention on the station. Cause not established: the curves are missing over the range.", "review": "2026-11-04"}
{"id": "CLARIDEN-9", "start": "2026-10-03T17:45Z", "end": "2026-10-05T10:45Z", "family": "Displacement", "description": "After the gap of 3 to 5 October, many targets resume at a different level, and do not return to the previous one until the end of the batch: D-304-C and D-303-C above all, in both directions, then D-302_A and D-301-A, P-299-B, D-300-C, D-303-B and D-304-B horizontally, D-301-C vertically; D-306-B, for its part, returns to its level from before its descent of the evening of the 1st. The raw positions of D-304-C and D-303-C have moved in the image relative to the other targets, the recognition error of several targets (D-302-C, D-301-C, D-303-C, D-304-C, D-301-A, D-306-B) also changes level, and the camera scale is no longer the same: the appearance of these targets and the camera pose changed during the shutdown. On resumption, a blurred object is very close to the lens (10:30 image). Cause not established: intervention or changed setting during the shutdown, or real movement; to be checked before trusting these new levels.", "review": "2026-11-04"}
{"id": "CLARIDEN-10", "start": "2026-10-05T10:30Z", "end": "2026-10-05T11:20Z", "family": "Obstruction", "description": "First measurement after the gap: the whole scene, references included, is shifted by several pixels in the image and the camera is tilted, then it returns within twenty minutes; the compensation absorbs it poorly for the duration of one measurement, and the corrected curves of many targets jump then return (D-303-C, D-302-B and PR_BG, D-306-B, D-304-B, P-299-C above all; D-303-B stays slightly shifted until 11:10). D-304-C is rejected. The 10:30 image shows a large blurred object very close to the lens, on the right, which hides D-304-C, and a worker in reflective clothing in the tunnel, at the top left: work is going on around the camera. Points to ignore; the structure does not move.", "review": "2026-11-04"}
{"id": "CLARIDEN-11", "start": "2026-10-05T12:10Z", "end": "2026-10-05T12:30Z", "family": "Obstruction", "description": "For the duration of one measurement, the whole right-hand row C (D-300-C, D-301-C, D-303-C, D-304-C, P-298-C, P-299-C) and the reference D-302-C are rejected, their recognition error almost at 1; the compensation runs without D-302-C and the targets that stayed under the threshold jump then return at the next measurement (D-306-B above all vertically, D-303-B, D-304-B, P-299-B, P-301-B, D-302-B and PR_BG). No image at 12:20: the cause is not seen, but the signature is that of something passing in front of the right-hand part of the scene. Point to ignore.", "review": "2026-11-04"}
{"id": "CLARIDEN-12", "start": "2026-10-06T18:00Z", "end": "2026-10-06T22:10Z", "family": "Visibility", "description": "For four hours, the corrected curves of the same group of targets take a step that starts and ends sharply: D-301-C horizontally above all, D-302-B and PR_BG (same prism) horizontally then vertically, D-304-B vertically, and at times P-301-B, D-303-B, D-302_A, D-301-A, D-304-C. The recognition error of the references PR-293, PR-295, PR-296 and of a few targets rises a little; the references move away from each other in the image. The camera housing temperature drops clearly over these hours. Nothing visible on the 20:00 image. View obstruction of cause not established, probably the tunnel air (colder); the curves and the recognition error return at 22:00, before the camera scale (see the thermal label of the same evening). The structure does not move: curves to ignore over the range.", "review": "2026-11-04"}
{"id": "CLARIDEN-13", "start": "2026-10-06T18:40Z", "end": "2026-10-06T22:40Z", "family": "Thermal displacement", "description": "The camera housing temperature drops clearly for four hours, and the camera scale deviates with it, then returns when the housing warms up, after the curves have returned from the view obstruction of the same evening. The corrected curves do not follow this deviation: the compensation absorbs it. Camera movement by thermal effect, deduced from its pose against the housing temperature; normal, nothing to do.", "review": "2026-11-04"}
{"id": "CLARIDEN-14", "start": "2026-10-06T22:00Z", "end": "2026-10-11T06:00Z", "family": "Displacement", "description": "Slow drift of several targets over four days, made of small steps, then stabilization: D-303-B rises vertically, D-303-C and D-304-C rise vertically, D-301-C rises horizontally, D-306-B goes down horizontally. No camera movement, ordinary recognition error, nothing on the images; the position in the image of D-301-C and D-303-B moves slightly away from that of the other targets, in the direction of their curves. The camera housing temperature stays almost constant over these days: no link with it. Slow return from the 11th to the 19th, labeled separately. Cause not established, in a tunnel under construction: a movement of these targets is not excluded. To be checked against the other measurements of the site; monitor this row.", "review": "2026-11-04"}
{"id": "CLARIDEN-15", "start": "2026-10-11T06:00Z", "end": "2026-10-20T00:20Z", "family": "Displacement", "description": "The targets of row C slowly come back after their drift of the 6th to the 11th: D-301-C goes back down horizontally from the 11th to the 15th, D-304-C and D-303-C go back down vertically from the 12th to the 19th, until the camera jump of the 20th shortly after midnight. No camera movement during these days, nothing in front of the targets on the 13th image at 12:00. The position in the image of D-301-C also partly returns toward that of the other targets. The camera housing temperature stays almost constant over these days: no link with it. This is the return of the drift of the 6th to the 11th, labeled separately. Cause not established, in a tunnel under construction: a movement of these targets is not excluded. To be checked against the other measurements of the site; monitor this row.", "review": "2026-11-04"}
{"id": "CLARIDEN-16", "start": "2026-10-15T22:45Z", "end": "2026-10-16T10:30Z", "family": "No data", "description": "No measurement or image for almost twelve hours, on the night of 15 to 16, and no station metric. The gap starts at the same time, around 23:00, on the nine stations that were measuring then (LENZSPITZE only has its first measurements in the middle of that night, WILDSTRUBEL is already stopped), and their metrics stop at the same time on most of them; measurements and metrics resume at different times depending on the station, most of them in late morning. JUNGFRAU, whose metrics continue, accumulates unsent entries all night, sent in late morning, and yet its measurements for the night are missing from the data: a common cause outside the stations (transmission or reception of the data), not a shutdown of the stations; it is not established. In addition, at CLARIDEN, the station restarts on its battery: the voltage stays well below its usual level, without charge, until early afternoon, then charging resumes; its power supply was also missing that night. The curves are missing over the range; check the site power supply if it repeats.", "review": "2026-11-04"}
{"id": "CLARIDEN-17", "start": "2026-10-16T14:20Z", "end": "2026-10-16T14:40Z", "family": "No data", "description": "One measurement is missing, for all sensors, a few hours after the resumption of the 16th: the curves have a short gap; normal voltage around it. The same gap falls at the same moment on the other stations measuring at that time (FLORIDA, LENZSPITZE, NORDEND, SNCF01): a common cause outside the station (transmission or reception of the data), not a failure of the station; it is not established. The curves are missing over the range; nothing to do on the station.", "review": "2026-11-04"}
{"id": "CLARIDEN-18", "start": "2026-10-18T09:00Z", "end": "2026-10-18T09:30Z", "family": "Visibility", "description": "For the duration of two measurements, the recognition error of several targets rises and the corrected curves of D-301-C (horizontal), D-302-B and PR_BG, P-301-B, D-302_A, D-304-B make a bump that comes back. The camera housing temperature drops at the same time. Same signature as the other episodes of view obstruction at the station, cause not established. Points to ignore.", "review": "2026-11-04"}
{"id": "CLARIDEN-19", "start": "2026-10-18T13:45Z", "end": "2026-10-18T23:30Z", "family": "No data", "description": "No measurement or image for almost ten hours, nor station metric. On resumption, the battery is depleted and the voltage low, then they rise: signature of a power cut. The curves are missing over the range; check the power supply if it repeats.", "review": "2026-11-04"}
{"id": "CLARIDEN-20", "start": "2026-10-19T09:00Z", "end": "2026-10-19T10:15Z", "family": "No data", "description": "Four measurements are missing within one hour, for all sensors, between isolated measurements: the curves have gaps; normal voltage around them. The same gap falls at the same moment on the other stations measuring at that time (FLORIDA, JUNGFRAU, LENZSPITZE, NIEDERHORN, NORDEND, SNCF01): a common cause outside the station (transmission or reception of the data), not a failure of the station; it is not established. The curves are missing over the range; nothing to do on the station.", "review": "2026-11-04"}
{"id": "CLARIDEN-21", "start": "2026-10-19T20:45Z", "end": "2026-10-19T21:30Z", "family": "No data", "description": "Three measurements are missing in less than an hour, for all sensors: the curves have a gap; normal voltage around it. The same gap falls at the same moment on the other stations measuring at that time (FLORIDA, JUNGFRAU, LENZSPITZE, NIEDERHORN, NORDEND, SNCF01): a common cause outside the station (transmission or reception of the data), not a failure of the station; it is not established. The curves are missing over the range; nothing to do on the station. The hourly metrics of BREITHORN, MICHIGAN and NEBRASKA are also missing at 21:00.", "review": "2026-11-04"}
{"id": "CLARIDEN-22", "start": "2026-10-20T00:15Z", "end": "2026-10-20T00:45Z", "family": "Displacement", "description": "The whole scene, references included, suddenly shifts by a fraction of a pixel in the image: the camera has moved. The compensation absorbs it for most targets, but D-306-B keeps a jump vertically that remains, and D-303-C, D-302-B and PR_BG a smaller one. Cause of the camera movement not established; the jump of D-306-B is not an established movement of the structure: to be checked.", "review": "2026-11-04"}
{"id": "CLARIDEN-23", "start": "2026-10-20T04:00Z", "end": "2026-10-25T18:00Z", "family": "Displacement", "description": "Slow drift of targets of row C, then stabilization at a new level: D-301-C rises horizontally from the 20th, D-304-C and D-303-C rise vertically mostly from the 22nd. No camera movement, ordinary recognition error. The rise of D-301-C starts before the work seen around the station on the 22nd (workers and a frame): no link established. The position in the image of D-301-C, D-304-C and D-303-C moves clearly away from that of the other targets, in the direction of their curves. The camera housing temperature stays almost constant over these days: no link with it. Partial return from the 26th to the 29th, labeled separately. Cause not established, in a tunnel under construction: a movement of these targets is not excluded. To be checked against the other measurements of the site; monitor this row.", "review": "2026-11-04"}
{"id": "CLARIDEN-24", "start": "2026-10-20T06:10Z", "end": "2026-10-20T06:30Z", "family": "No data", "description": "One measurement is missing, for all sensors: the curves have a short gap; the station nevertheless synchronizes at that moment, normal voltage. The same moment is also missing at LENZSPITZE, and at no other station: a common cause outside the station is possible, not established. Nothing to do.", "review": "2026-11-04"}
{"id": "CLARIDEN-25", "start": "2026-10-20T20:45Z", "end": "2026-10-20T21:45Z", "family": "No data", "description": "Five measurements are missing within one hour, for all sensors: the curves have a gap. The station is nevertheless running (continuous synchronizations, 21:00 image, normal voltage): the measurement is not made or not recorded. The 21:00 measurement is also missing at NIEDERHORN, and at no other station: a common cause is possible, not established. Nothing to do.", "review": "2026-11-04"}
{"id": "CLARIDEN-26", "start": "2026-10-22T06:30Z", "end": "2026-10-22T08:45Z", "family": "Visibility", "description": "In two phases, from 06:40 to 06:50 then from 07:50 to 08:30, the recognition error of several targets and of the references D-302-C and PR-293 rises, and the corrected curves of the usual group make a bump that comes back: D-301-C horizontally, D-302-B and PR_BG vertically, P-301-B, D-304-B, D-304-C, and at the start D-302_A, P-298-A, D-304-A, D-303-A; between the two, D-302-B and PR_BG move once more. The camera housing temperature drops during these hours. The 08:00 image shows lights at the far end of the tunnel (machine or vehicle), nothing in front of the targets. Diffuse view obstruction of cause not established, the same as in the other episodes at the station. Curves to ignore over the range; the structure does not move.", "review": "2026-11-04"}
{"id": "CLARIDEN-27", "start": "2026-10-22T08:00Z", "end": "2026-10-22T09:20Z", "family": "Thermal displacement", "description": "The camera housing temperature drops clearly on the morning of the 22nd, and the camera scale deviates with it, mostly after the curves have returned from the view obstruction of the same hour, then returns when the housing warms up. The corrected curves do not follow this deviation: the compensation absorbs it. Camera movement by thermal effect, deduced from its pose against the housing temperature; normal, nothing to do.", "review": "2026-11-04"}
{"id": "CLARIDEN-28", "start": "2026-10-22T08:45Z", "end": "2026-10-22T17:00Z", "family": "Displacement", "description": "The low targets of row B rise vertically during the day: D-306-B above all, D-302-B and PR_BG, D-304-B, D-303-B; the recognition error of a few of them rises a little. Workers are visible in the tunnel on the 12:00 image, and a frame appears very close to the camera at the top of the image at 13:00 (it stays there until the end of the batch): work around the station. The position in the image of D-306-B rises a little relative to the other targets, in the direction of its curve. The link between this work and the rise is not established. Evening descent, labeled separately. Cause not established, in a tunnel under construction: a movement of these targets is not excluded. To be checked against the other measurements of the site; monitor this row.", "review": "2026-11-04"}
{"id": "CLARIDEN-29", "start": "2026-10-22T17:00Z", "end": "2026-10-23T10:30Z", "family": "Displacement", "description": "The low targets of row B go back down vertically, all at once on the evening of the 22nd then more slowly on the morning of the 23rd, to below their level from before their rise of the day: D-306-B above all, D-304-B, D-303-B, D-302-B and PR_BG. No camera movement; the frame installed on the 22nd stays at the top of the image (19:00 image), nothing else. The position in the image of D-306-B also goes down relative to the other targets. This is the return of the rise of the day, labeled separately, and it goes beyond it. Cause not established, in a tunnel under construction: a movement of these targets is not excluded. To be checked against the other measurements of the site; monitor this row.", "review": "2026-11-04"}
{"id": "CLARIDEN-30", "start": "2026-10-24T01:00Z", "end": "2026-10-24T05:00Z", "family": "Displacement", "description": "The low targets of row B (D-306-B above all, D-304-B, D-303-B) partly rise again vertically in the night of the 24th, toward their level from before the descent of the evening of the 22nd, without reaching it. No camera movement. Cause not established, in a tunnel under construction: a movement of these targets is not excluded. To be checked against the other measurements of the site; monitor this row.", "review": "2026-11-04"}
{"id": "CLARIDEN-31", "start": "2026-10-24T18:20Z", "end": "2026-10-25T19:10Z", "family": "Displacement", "description": "The left targets of row A (D-302_A, D-303-A, D-304-A, D-301-A, P-299-A) and D-304-B, D-306-B, P-301-B fidget in jolts (around 18:30 and 21:30 on the 24th, 07:00 and 15:30 on the 25th): the vertical rises, the horizontal goes down; the recognition error of these targets and of the reference D-302-C rises during the first jolts, and the references PR-291 and PR-293 move slightly away from the targets in the image. Everything calms down on the evening of the 25th. After the agitation, the horizontal of the A targets stays shifted until the end of the batch. Workers are visible on the image of the 24th at 15:00 and the frame is still at the top of the image. Cause not established: shift to be checked.", "review": "2026-11-04"}
{"id": "CLARIDEN-32", "start": "2026-10-25T18:00Z", "end": "2026-10-29T04:00Z", "family": "Displacement", "description": "After their rise of the 20th to the 25th, D-304-C and D-303-C slowly go back down vertically from the 26th to the 29th, without returning to their level from before the rise, then stabilize. No camera movement, nothing in front of the targets on the images of the 28th at 19:00 and 20:00. Their position in the image also partly returns toward that of the other targets. This is the partial return of the rise of the 20th to the 25th, labeled separately. Cause not established, in a tunnel under construction: a movement of these targets is not excluded. To be checked against the other measurements of the site; monitor this row.", "review": "2026-11-04"}
{"id": "CLARIDEN-33", "start": "2026-10-26T14:30Z", "end": "2026-10-26T15:15Z", "family": "No data", "description": "Three measurements are missing in less than an hour, for all sensors: the curves have a gap; normal voltage around it. The same gap falls at the same moment on the other stations measuring at that time (FLORIDA, JUNGFRAU, LENZSPITZE, NIEDERHORN, NORDEND, SNCF01), and their metrics are also missing at the same minutes: a common cause outside the station (transmission or reception of the data), not a failure of the station; it is not established. The curves are missing over the range; nothing to do on the station. The hourly metrics of BREITHORN, MICHIGAN and NEBRASKA are also missing at 15:00.", "review": "2026-11-04"}
{"id": "CLARIDEN-34", "start": "2026-10-27T09:00Z", "end": "2026-10-27T09:30Z", "family": "No data", "description": "Two measurements are missing, for all sensors: the curves have a short gap; normal voltage around it. The same gap falls at the same moment on the other stations measuring at that time (FLORIDA, JUNGFRAU, LENZSPITZE, NORDEND): a common cause outside the station (transmission or reception of the data), not a failure of the station; it is not established. The curves are missing over the range; nothing to do on the station.", "review": "2026-11-04"}
{"id": "CLARIDEN-35", "start": "2026-10-27T12:00Z", "end": "2026-10-27T12:20Z", "family": "Target issue", "description": "For the duration of one measurement, the target PR-284 jumps by several pixels horizontally and vertically, then returns: the measured position has left its spot, with a high recognition error but under the threshold, so kept in the curve. Since 24 October around 14:20, the spot of PR-284 is clearly weaker (thumbnails of the 24th at 12:00 and 16:00, of the 27th at 12:00) and its recognition error has stayed high. False point to ignore; look at the state of the target PR-284 if the false points repeat.", "review": "2026-11-04"}
{"id": "CLARIDEN-36", "start": "2026-10-28T19:20Z", "end": "2026-10-28T20:10Z", "family": "Displacement", "description": "On the evening of the 28th, the low targets of row B go down by a step vertically, D-306-B above all, then D-304-B, and stay at this new level until the end of the batch; D-303-B and D-304-B also go down a little horizontally. The position in the image of D-306-B goes down a little relative to the other targets, no camera movement, nothing on the 19:00 and 20:00 images (the frame at the top of the image is still there). Cause not established, in a tunnel under construction: a movement of these targets is not excluded. To be checked against the other measurements of the site; monitor this row.", "review": "2026-11-04"}
{"id": "CLARIDEN-37", "start": "2026-10-29T14:50Z", "end": "2026-10-29T15:10Z", "family": "No data", "description": "One measurement is missing, for all sensors: the curves have a short gap; the station nevertheless synchronizes at that moment, normal voltage. The same gap falls at the same moment on the other stations measuring at that time (LENZSPITZE, NORDEND, SNCF01): a common cause outside the station (transmission or reception of the data), not a failure of the station; it is not established. The curves are missing over the range; nothing to do on the station.", "review": "2026-11-04"}
{"id": "CLARIDEN-38", "start": "2026-10-29T23:45Z", "end": "2026-10-30T00:15Z", "family": "Target issue", "description": "At midnight, D-302-B jumps vertically and a little horizontally and stays at this new level until the end of the batch; PR_BG, on the same prism, jumps in the opposite direction. The raw positions of the two sensors do not move, only their starting position has changed (the relative displacement jumps without any movement in the image): a configuration or processing change of these two sensors, not a movement of the structure. Check their configuration with the operator; do not read this jump as a movement, nor compare their curves before and after.", "review": "2026-11-04"}
{"id": "CLARIDEN-39", "start": "2026-10-30T17:00Z", "end": "2026-10-30T17:45Z", "family": "No data", "description": "Four measurements are missing in less than an hour, for all sensors: the curves have a gap. Cause not established.", "review": "2026-11-04"}
{"id": "CLARIDEN-40", "start": "2026-10-31T13:45Z", "end": "2026-10-31T15:10Z", "family": "Visibility", "description": "For one hour, the corrected curves of the usual group make a bump that comes back: D-301-C (horizontal), D-302-B and PR_BG (vertical), D-301-A, D-300-A, D-304-B, D-304-C, D-302_A, and for a moment the reference PR-295; the recognition error of a few sensors rises during the episode. Same signature as the other episodes of view obstruction at the station; cause not established. Curves to ignore over the range.", "review": "2026-11-04"}
{"id": "CLARIDEN-41", "start": "2026-10-31T18:45Z", "end": "2026-10-31T20:00Z", "family": "Visibility", "description": "For the duration of a few measurements, the corrected curves of D-301-C, P-301-B, P-299-A, D-302-B and PR_BG, D-303-B make a bump that comes back, and the reference PR-295, which is seen less well from 18:50, leaves its level; it is rejected at 19:50 (its curve is missing at that measurement), without the targets moving because of it. View obstruction of cause not established; points to ignore.", "review": "2026-11-04"}
{"id": "CLARIDEN-42", "start": "2026-10-31T22:15Z", "end": "2026-11-01T00:00Z", "family": "Visibility", "description": "The reference PR-295 is seen poorly: its spot is weaker (23:00 thumbnail), it is rejected at times and, between two rejections, it is poorly measured; the compensation changes basis, and at 22:50 many targets jump together then return, without any movement of their raw positions. Until 23:50, the curves of D-301-C, P-301-B, D-302-B and PR_BG stay shifted, then briefly cross to the other side, with the recognition error of several targets rising. The camera housing temperature drops clearly at that hour. Cause of the obstruction not established (same signature as the other episodes). The jumps are not a movement: curves to ignore over the range.", "review": "2026-11-04"}
{"id": "CLARIDEN-43", "start": "2026-10-31T23:10Z", "end": "2026-11-01T00:10Z", "family": "Thermal displacement", "description": "The camera housing temperature drops clearly on the evening of the 31st, and the camera scale deviates with it, then partly returns when the housing warms up; the strongest deviation comes when the curves return from the view obstruction of the same hour. The corrected curves do not follow this deviation: the compensation absorbs it. Camera movement by thermal effect, deduced from its pose against the housing temperature; normal, nothing to do.", "review": "2026-11-04"}