# Labels: BREITHORN, 2026-10-13T00:00Z → 2026-10-22T16:00Z (UTC) Task: check the 5 existing labels of the range (`work/existing.jsonl`) and look for what they miss. 4 h cadence, 56 instants present, 3 missing (16/10 00:00, 04:00, 08:00). Recent-camera image-quality columns are empty: no `quality.py`. Weather: BREITHORN has no place in `~/aimsight-data/extraction/stations.txt` (its line is bare), so no weather was fetched. The camera is indoors (factory) anyway. ## Verdict per old id - **BREITHORN-10**: kept. The passage at 13/10 04:00 is confirmed: COLH20''' and COLI24 are rejected, POUI22 jumps in corr_x (+33 noises) and corr_y (−25), POUI24 jumps in corr_x (+28) and COLI22 in corr_y (−19), and everything is back at 08:00. On the 04:00 image a car with a light on sits at the bottom between the pillars, and the bottom spots are gone. The references hold (inlier 4/4). Bounds 00:00 → 08:00 are right. - **BREITHORN-11**: kept. Tilt goes from its high at 13/10 04:00–08:00 (0.0197) down to a minimum at 16/10 16:00 (0.01717). Rotation rises from −0.0253 (13/10 08:00) to −0.02197 (16/10 16:00). POUI19 corr_x goes from 0.276 down to 0.238 (15/10 12:00), COLH20 and POUI20 also come back. Resumption starts at 16/10 20:00 (tilt 0.0176, then 0.0188 at 17/10 00:00). Starting at 04:00 rather than 08:00 is within one cadence step and matches the end of the spanning BREITHORN-2. - **BREITHORN-12**: kept. No measurement at 16/10 00:00, 04:00 or 08:00, and no image (the image gap is 960 min, from 15/10 20:00 to 16/10 12:00). BREITHORN metrics, hourly: voltage normal (13.5–14.4 V) and `last_sync` present until 05:00, empty at 06:00, metrics missing 07:00–10:00, back at 11:00. `stations.py` on all stations: from 15/10 23:00, measurements are missing on every station measuring then, and they resume at different times. Everything the description says is borne out. - **BREITHORN-14**: kept. Housing temperature has its range minimum on 19/10 (25.75–26.75 between 05:00 and 08:00, versus 28–29 the day before) and is back to 28.5 at 12:00. Scale is at its minimum of 0.999752 at 08:00 and back to 0.999767 at 12:00, and rotation steps down. In corr_y, COLH20 goes 0.099 → 0.125 → 0.163 → 0.102 and REFPOU22 goes 0.027 → 0.052 → 0.086 → 0.025. COLI21 corr_x is 0.026 at 08:00 against 0.089/0.107 around it, and its corr_y is −0.017 against 0.032/0.057. The 08:00 image is clean. A small rise at 18/10 20:00 (COLH20 +4 noises, REFPOU22 +3) is too weak to move the start (see section 2). - **BREITHORN-15**: kept. COLI24 is rejected at 21/10 20:00, 22/10 00:00 and 04:00. COLI22 corr_x is around −0.10 (−11 to −15 noises) and POUI22 corr_y around +0.15 (+12). Both edges are clean: at 21/10 16:00 and 22/10 08:00 every sensor is at its level. On the 20:00 image a vehicle cab is at the bottom left between the pillars, and the 08:00 image is clear. Wording note: "deviate a little" understates the deviations of COLI22 and POUI22, which are clear. I left it, since the wording is qualitative and the label was reviewed. ## 1. My labels ### 2026-10-13T00:00Z → 2026-10-13T08:00Z (BREITHORN-10, kept) - **Phenomenon of the catalogue**: a pass-by hides the targets for the length of one measurement - **Precedents**: BREITHORN-9 (same signature, vehicle at the bottom of the scene) - **Family**: Obstruction, because the object is seen - **Measured**: as in the verdict above - **Images**: 13/10 00:00 (clean), 04:00 (car with a light on at the bottom) - **Confidence**: high ### 2026-10-13T04:00Z → 2026-10-16T20:00Z (BREITHORN-11, kept) - **Phenomenon of the catalogue**: the camera tilts little by little (the return phase) - **Precedents**: BREITHORN-2 and BREITHORN-13 (spanning) - **Family**: Displacement. The drift does not come back with temperature over the month (expert, BREITHORN-13). - **Measured**: pose and corr_x as in the verdict - **Images**: zone sheets from 13/10 to 16/10, nothing in front - **Confidence**: high ### 2026-10-13T20:00Z → 2026-10-14T12:00Z (added) - **Phenomenon of the catalogue**: none exactly. Closest is "The base changes without a reference lost" or a short go-and-return of the camera. - **Precedents**: NORDEND-112 (reviewed: a small joint jump with immediate return and nothing on the images, Displacement, cause not established). It guided the family and the conclusion. - **Family**: Displacement. No cause is seen, the housing temperature is flat, and the error_value does not rise. - **Measured**: corr_y of COLI20 goes −0.054 (13/10 20:00) → +0.0025 (00:00) → −0.001 (04:00) → −0.021 (08:00) → −0.037 (12:00); ranges.py gives the largest jump as +7.7 noises. COLJ19 goes −0.050 → −0.005 → +0.010 → −0.007 → −0.033 (+5.8 noises). POUI20 goes −0.045 → −0.019 → −0.015 → −0.033 → −0.058. POUI19 goes −0.125 → −0.081 → −0.072 → −0.096 → −0.088, so it comes back only in part. COLI20 corr_x is +0.018 at 00:00. With `overview.py --rigid 2026-10-13T16:00Z --follow …`, the residuals of these four targets stay within about 0.04 px, so they don't move relative to each other. The rigid run based on 12/10 20:00 shows the references moving against the targets at 00:00–04:00 (REFG44N dx +0.043/+0.030, REFI'21 dx −0.041/−0.030). Tilt is 0.01881 → 0.01969 → 0.01916, sigma0 peaks at 0.00099 at 00:00, and housing temperature stays 29.5–30 all night. - **Neighbours** (`stations.py` BREITHORN, MICHIGAN, NEBRASKA at 4 h): at 14/10 00:00 all three cameras take a small forward tilt step at the same measurement. BREITHORN goes 0.01881 → 0.01969, MICHIGAN 0.0100 → 0.0117, NEBRASKA 0.0263 → 0.0273, and all three come back partly at 04:00. MICHIGAN's targets also move then, in corr_x at 00:00 and in corr_y at 04:00, but that station runs on two references and swings that much on other nights too. No neighbour label covers this instant specifically (NEBRASKA-3 and MICHIGAN-16 are multi-day). This supports a cause common to the building, so the description says so. - **Images**: zone 13/10 20:00 and 14/10 00:00, the same scene with nothing in front - **Confidence**: medium. Clear on the curves, and the common tilt step makes a building-wide cause likely, but it is not established. ### 2026-10-14T04:00Z → 2026-10-14T12:00Z (added) - **Phenomenon of the catalogue**: a pass-by, with the reference base disturbed ("A passage in front of a reference that makes the base jump is Obstruction when the object is seen") - **Precedents**: JUNGFRAU-50 and JUNGFRAU-89 (reviewed: a lit background behind a reference gives small one-measurement jumps of several targets). They are Visibility there because the light was the sun. Here the light comes from objects, so it goes by the boundary in `families.md` ("even if the object is lit… Obstruction"). - **Family**: Obstruction. A local object is seen on the image, and it is not a nuisance spread over the whole scene. - **Measured**: at 14/10 08:00 only. REFPOU22 corr_y is +0.014 against −0.005/−0.020 around it, REFG44N corr_y 0.0067 against 0.021, and REFI'21 corr_y 0.0089 against 0.021 (rolling ±3: −5 noises). COLH20 corr_x is 0.093 against 0.074/0.073, POUI20 corr_x 0.085 against 0.068/0.076, and COLI21 corr_x 0.052 against 0.083/0.075. error_value of REFG44N is 0.136 against 0.124/0.125 (+5 noises), and COLH20 is up as well. Nothing is rejected, and inlier is 4/4. Scale is 0.999824 against 0.999845/0.99986, and the housing temperature is flat (29–30). - **Images**: zone and sensor thumbnails at 04:00, 08:00 and 12:00 (`fig_14oct_lit_objects.png`). At 08:00 alone, lit structures appear behind REFI'21, REFH22, REFPOU22, POUI24, COLI22 and below COLI21, and the background behind COLH20 changes. All spots stay visible. - **Confidence**: medium. The deviations are small (3–5 noises), but they come together, on the references, with a pose dip and the object seen at that same measurement only. ### 2026-10-15T20:00Z → 2026-10-16T12:00Z (BREITHORN-12, kept) - **Phenomenon of the catalogue**: a gap common to several stations - **Precedents**: none needed. The label is reviewed and borne out. - **Family**: No data - **Measured**: see the verdict - **Images**: none during the gap; the files were searched - **Confidence**: high ### 2026-10-19T00:00Z → 2026-10-19T12:00Z (BREITHORN-14, kept) - **Phenomenon of the catalogue**: the camera moves through a thermal effect (cold trough of the housing) - **Precedents**: BREITHORN-17, 21, 24, 25, 27 (same signature) - **Family**: Thermal displacement (according to the expert) - **Measured / Images**: see the verdict; the 08:00 image is clean - **Confidence**: high ### 2026-10-21T16:00Z → 2026-10-22T08:00Z (BREITHORN-15, kept) - **Phenomenon of the catalogue**: a vehicle or machine that stays in front of the targets - **Precedents**: BREITHORN-16 (the next night) - **Family**: Obstruction - **Measured / Images**: see the verdict - **Confidence**: high ### Spanning labels, inside the range - BREITHORN-2 (ends 13/10 04:00) and BREITHORN-13 (from 16/10 20:00): consistent within the range. Tilt rises from 16/10 20:00 to 0.0257 on 22/10. COLH20, COLI20, COLI21, COLJ19, POUI19 and POUI20 go up in corr_x, POUI19 the most (0.24 → 0.39), COLI24 goes down in corr_y, and POUH21 stays flat. Nothing to correct. ## 2. What I left without a label - **15/10 12:00 → 20:00**, the warmest hours of the housing (31–32.25). Scale is at its range maximum, the rotation steps up, and COLH20 corr_x drops (a drift target, kept by BREITHORN-11). REFPOU22, REFG44N, POUH21 and POUI24 move in corr_x at 12:00 by only 3–4 noises (ranges `--outside`). The corr_y of REFPOU22 (down) and of COLI21, REFG44N, REFI'21 (up) mirror the cold signature but stay under about 4 noises, and they are back after the gap. That is under the 5-noise floor in `labeling-rules.md` for a thermal label. It is the closest candidate to a missed label. - **18/10 20:00**: COLH20 corr_y +0.028 and REFPOU22 +0.024 (3–4 noises), as the housing starts to cool. It is the edge of the 19/10 episode, too weak to move a reviewed bound. - **19/10 20:00**: COLI20, COLJ19, POUI20 and POUI19 dip together in corr_y for one measurement (−4 to −5 noises, rolling). The image is clean and the pose is quiet. It is the same mode of the upper group as on 14/10, but weaker and only one measurement. - **20/10 12:00**: the same group goes up by 2–3 noises, and the error_value of COLI20, POUI20 and POUH21 rises a little. Too weak. - **22/10 04:00**: pan and scale move a little at the housing trough (27.25), and POUI24 corr_x is +0.025 (~3 noises). This falls under BREITHORN-15, and nothing clear shows in the corr of the other targets. - **13/10 08:00 and 17/10 08:00**: lit objects at the bottom of the scene (morning activity), with no deviation on the curves. ## 3. The documentation - What helped: `families.md`, on the Visibility/Obstruction boundary for a lit object and "A passage in front of a reference… is Obstruction when the object is seen". `labeling-rules.md`, on "what falls under a long label is labelled apart", on bounds at the gap edge, and on the 5-noise floor. `reading-rules.md` §5, on reading raw positions with `--rigid`. `stations.md`, for the building and the neighbours. - `ranges.py --rolling 3` missed the two-measurement bump of 14/10 00:00–04:00, because the window contains it. It was found with `--outside`, by reading the targets' corr_y tables, and in the overview residuals. On a 4 h cadence, `--rolling 1` would suit better. - The precedents: JUNGFRAU-50 and -89 are close in signature but differ in family. The difference is the light source (sun versus object), which `families.md` settles. - No contradiction with the reviewed labels. One nuance on BREITHORN-15: "a little" understates the deviations of COLI22 and POUI22. ## Difficulties - No weather: BREITHORN has no place in `stations.txt`, and there is no `data/BREITHORN/weather/` folder (checked after the user's question). The station is indoors. - The neighbouring cameras were first read only through their labels in the spanning context; the `stations.py` comparison on 13–14/10 was added after the user's question. - One `overview.py --rigid --follow` output was mangled by my `cut` of the columns; I read the per-sensor summary instead. ## Sources read `instructions/analyst.md`; `tools/GUIDE.md`; `tools/DATA.md`; `labeling/families.md`; `labeling/labeling-rules.md`; `labeling/reading-rules.md`; `labeling/stations.md`; `labeling/auto/BREITHORN.jsonl` (ids, and descriptions of 9, 16, 17, 21, 24, 25); `work/existing.jsonl`; `work/spanning.jsonl`; precedents (3 queries: NORDEND-112, JUNGFRAU-50, JUNGFRAU-89, NEBRASKA-10, BREITHORN-17/24/25/27). Tools run: inventory, overview (with `--rigid` and residuals), metrics (4 h and 1 h), summary, ranges (`--rolling`, `--outside`), days, stations (all stations, around the gap), thumbnails (zone and sensors), plot. Images: 13/10 00:00 and 04:00; 19/10 08:00; 21/10 20:00; 22/10 08:00 (whole); zone sheets at 13/10 08:00–16:00, 13/10 20:00, 14/10 00:00–16:00, 15/10 08:00–16:00, 16/10 12:00–16:00, 17/10 08:00–12:00, 18/10 08:00–12:00, 19/10 12:00–20:00, 20/10 08:00–12:00, 21/10 12:00.