# Labels: CLARIDEN, 2026-10-11T00:00Z → 2026-10-20T04:00Z (UTC) The task was to verify the 8 existing labels of the range (`work/existing.jsonl`). The 2 labels that span the range (`work/spanning.jsonl`) are context only. Station: a tunnel under construction, cadence 10 min, five references (D-302-C, PR-291, PR-293, PR-295, PR-296). PR-296 is retained by the compensation at every instant, although `stations.md` lists four references. There are no image-quality metrics (inventory: export peak to snr empty), so `quality.py` does not apply. Images: one per hour, always dark (night-like infrared view). **Weather**: none. There is no `data/CLARIDEN/weather/` folder and no CLARIDEN line in `~/aimsight-data/extraction/stations.txt`: the station has no Swiss position. In any case it is in a tunnel. **Requalification of 2026-11-17** (new rule, `labeling-rules.md` §1: only what stands out from the noise of the corrected curves, at least one target beyond 5 of its own noises). The work below is the verification already done; the ids are now the current ones (old id → current: 15 → 49, 16 → 52, 17 → 17, 18 → 55, 19 → 56, 20 → 57, 21 → 58, 22 → 59; the added labels became 50, 51, 53, 54). Result: 10 kept as they are, 1 rewritten (CLARIDEN-49), 1 removed (CLARIDEN-51). The values are in section 2 and in "## Requalification". ## Verdict per old id | id | verdict | evidence | |---|---|---| | CLARIDEN-15 | **corrected** (end, description) | 3 h medians: D-304-C corr_y goes from about −0.48 (14th–15th) to −0.494 at the first steps after the gap of the 16th (10:30), then stays at −0.49…−0.50 until the 17th. D-303-C goes from −0.13 to −0.14…−0.147 and stays there. D-301-C corr_x has been flat around −0.08…−0.09 since the 14th. The return is over at 2026-10-16T12:00Z; afterwards it is a plateau, and a plateau is not a return (labeling-rules §2). The further dip of D-303-C and D-304-C on 18–19 follows the camera tilt and comes back at the jump of the 20th 00:30, so it belongs to the new tilt label. The description said "No camera movement during these days", but the tilt rises from about −2 to +0.3 thousandths of a degree on the 11th–13th and falls to −4.6 on the 19th. | | CLARIDEN-16 | **corrected** (start 22:45 → 22:50) | Last measurement before the gap: 22:50 (inventory: "between 22:50 and 10:30: 69 missing"). 22:45 is not a measurement instant at a 10 min cadence. The description is kept. | | CLARIDEN-17 | **kept** | Single missing step 14:30; bounds 14:20 → 14:40 are measurement instants; metrics normal (BusVoltage ~14.36 V). | | CLARIDEN-18 | **corrected** (start 09:00 → 08:50, description) | At 09:00 the row A targets are already up in corr_y: D-300-A +0.075, D-302_A +0.095, D-303-A +0.098, D-304-A +0.004 (usual about −0.065), D-301-A −0.056 (usual −0.12) and P-298-A +0.053, each about +3 to +3.5 noises, together. D-302-B is at 0.094. At 09:10–09:20, error_value rises on 9 to 11 sensors (PR-293, PR-295, D-300-C, D-301-C, D-302-B, D-303-B, D-303-C, D-304-B…). D-302-B/PR_BG corr_y reaches 0.154 (+8 noises), D-301-C corr_x −0.21 (−9 noises), P-301-B corr_x +0.05. Everything is back at 09:30. The 09:00 image shows nothing in front of the targets (looked at; same as 08:00). Family Visibility kept: sharp edges and an error_value rising on most sensors, like the reviewed CLARIDEN-12. The old text named neither the row A targets nor the 09:00 image. | | CLARIDEN-19 | **corrected** (start 13:45 → 13:50) | The last measurement is 13:50. Metrics: none from 15:00 to 21:00 (metrics.py), BusVoltage 13.26 V at the restart then rising: the description holds. | | CLARIDEN-20 | **corrected** (end 10:15 → 10:10) | Present instants: 09:00, 09:30, 09:50, 10:10. The first measurement after the last gap is 10:10. | | CLARIDEN-21 | **corrected** (start 20:45 → 20:40) | Present: 20:40, 21:10, 21:30; the gap starts after 20:40. | | CLARIDEN-22 | **corrected** (bounds 00:15→00:45 → 00:10→00:40, description) | Raw y of the targets: −0.0325 at 00:10, +0.005 at 00:20 (already moving), +0.165 at 00:30, then a plateau. The tilt goes from −0.0027 to −0.0012 to +0.0023. The new level is reached at 00:30, so the end is 00:40. In corr_y, D-306-B goes 0.034 → 0.105 (+7 noises) and stays, beyond its level of the 16th–17th (≈0.05). D-303-C goes −0.157 → −0.124, D-304-C −0.518 → −0.477, D-304-B −0.075 → −0.058, P-301-B and D-303-B also rise: these jumps bring them back to their level of before the 17th, so the jump erases the tilt remainder. D-302-B/PR_BG jump in corr_x (2 h medians 0.064 → 0.090 → 0.101) and do not jump in corr_y. The old description ("D-303-C, D-302-B and PR_BG a smaller jump that remains") was wrong on the nature of most of the jumps. Images of 00:00 and 01:00: work lights at the far end of the tunnel, nothing in front of the targets. | **Spanning labels** (not changed): - **CLARIDEN-1** (P-300-B Target issue): holds in the range. P-300-B is rejected at all 1187 instants (inventory), with error_value about 0.93. - **CLARIDEN-14** (drift of the 6th–11th, ends 11th 06:00): its in-range part (11th 00:00–06:00) is a plateau, which is consistent. But its sentence "No camera movement" is contradicted just before the range: the tilt goes from +0.8 (9th 00h) to −2.0 (11th) thousandths of a degree (6 h table, `work/tilt_vs_targets_6h.txt`), and D-306-B corr_y follows it down (0.045 → 0.022). This is outside my range (9th–11th); it is to be checked by whoever verifies the range of the 6th–11th. ## 1. My labels ### 2026-10-11T06:00Z → 2026-10-16T12:00Z (CLARIDEN-49, ex-15; rewritten at the requalification) - **Phenomenon of the catalogue**: Targets move slowly, alone, then come back (return part). - **Precedents**: CLARIDEN-14 (its outward), reviewed. - **Family**: Displacement. No cause is established, and the movement does not follow the temperature (housing at 40.0–40.4 °C). - **Measured**: 3 h medians (above). D-301-C corr_x −0.042 (11th) → −0.08/−0.09 (14th–15th). D-303-C corr_y −0.12 → −0.145, and D-304-C −0.455 → −0.495, reached at 16th 09:00–12:00. These movements do not follow the tilt: they continue on the 13th–15th while the tilt is flat around 0. - **Images**: 13th 12:00, a whole-zone thumbnail: nothing in front of the targets. - **Confidence**: medium. The end is read on medians of about 0.01 px steps, close to the noise (MAD 0.011 per measurement). ### 2026-10-15T22:50Z → 2026-10-16T10:30Z (CLARIDEN-52, ex-16) - **Phenomenon**: A gap common to several stations, plus a station restart on its battery (as described). - **Family**: No data. **Measured**: 69 missing steps; no metrics 00:00–09:00; BusVoltage 13.3 V at the restart, then 14.36 V. **Images**: none from 22:00 to 10:30. **Confidence**: high. ### 2026-10-16T14:20Z → 2026-10-16T14:40Z (CLARIDEN-17) No data, one step; high confidence. ### 2026-10-18T08:50Z → 2026-10-18T09:30Z (CLARIDEN-55, ex-18) - **Phenomenon**: Visibility drops over the whole scene, without an obstacle (by its signature); like CLARIDEN-12. - **Precedents**: CLARIDEN-12 (reviewed Visibility, same group D-301-C, D-302-B/PR_BG, D-304-B). - **Family**: Visibility rather than Displacement. The error_value rises on most sensors, including references, with sharp edges (families.md boundary "Thermal or Visibility"). The pose jump comes with it. - **Measured**: values above; the camera tilt goes −0.0012 → −0.0028 → −0.0038 → −0.0025 → −0.0008 (08:50 → 09:30). The housing temperature drops to 39.6 °C on the 08:00–10:00 step. - **Images**: 08:00 and 09:00, whole image: identical, nothing in front. - **Confidence**: medium. The bounds are sure; the cause is deduced, not seen. ### 2026-10-18T13:50Z → 2026-10-18T23:30Z (CLARIDEN-56, ex-19) No data; signature of a power cut (low voltage at the restart). High confidence. ### 2026-10-19T09:00Z → 2026-10-19T10:10Z (CLARIDEN-57, ex-20) and 2026-10-19T20:40Z → 2026-10-19T21:30Z (CLARIDEN-58, ex-21) No data; the common gaps with other stations are as described (not re-read on the other stations: the descriptions were validated). High confidence on the bounds. ### 2026-10-20T00:10Z → 2026-10-20T00:40Z (CLARIDEN-59, ex-22) - **Phenomenon**: A step of the camera that the compensation does not erase. - **Precedents**: WILDSTRUBEL-200 (a camera tilt not caught by the compensation, Displacement). - **Family**: Displacement. The cause of the camera step is not established, and remainders stay on D-306-B and D-302-B. - **Measured**: above (native table `summary.py --column corr_y --step 10min`, 19th 23:30 → 20th 01:30). - **Images**: 00:00 and 01:00 (zone thumbnails): work lights at the far end of the tunnel. - **Confidence**: high on the jump; medium on what stays. ### 2026-10-11T08:50Z → 2026-10-11T09:10Z (CLARIDEN-50) - **Phenomenon**: none in the catalogue exactly. It is close to "The base changes without a reference lost", for a single measurement. - **Precedents**: none useful. - **Family**: Displacement: a jump then the return, without an established cause. The error_value is flat, so it is not Visibility. - **Measured**: `scripts/group_flips.py`: 10 targets beyond 3 noises downward in corr_y at 09:00 (D-304-A −5.7, D-301-A −5.5, D-303-A −4.5, D-301-C −4.2, D-302_A −3.9, D-302-B/PR_BG −3.8, P-299-B −3.7, P-301-B −3.3, P-299-A −3.2). Raw values: D-301-A −0.212 against −0.11 around; D-304-A −0.176 against −0.05. Rigid fit (base 08:00): ty +0.063 and rotation −0.00114 at 09:00. D-302-C dy −0.010 against +0.04…+0.09 for the other references. The camera rotation hits its window minimum (−0.0054°) at 09:00. All is back at 09:10. - **Images**: 09:00 (zone thumbnail): nothing in front. - **Confidence**: medium. It is clearly a common one-measurement jump, but small (about 0.1 px). ### 2026-10-11T14:00Z → 2026-10-13T02:00Z (CLARIDEN-51): removed at the requalification The camera straightens a little and the remainder on D-306-B, D-304-B, D-303-B and D-302-B/PR_BG stays under 5 noises: see section 2. Its old reading (2 h medians, `work/tilt_2h_11-13.txt`) already put it at 2 to 3 noises per measurement. ### 2026-10-17T16:00Z → 2026-10-20T00:30Z (CLARIDEN-53) - **Phenomenon**: The camera tilts little by little; incomplete compensation. - **Precedents**: BREITHORN-2 and BREITHORN-11 (the compensation corrects some targets better than others), SNCF01-7. - **Family**: Displacement, as above. The temperature drops on the 18th (39.6 °C at 08:00, 39.55 °C at the restart), but the tilt keeps going down until 19th 04:30 while the housing is back at 40.1 °C. A gap does not cut it: the movement is visible on both sides of CLARIDEN-19. - **Measured** (2 h medians, `work/tilt_2h_17-20.txt`): tilt −0.01 (17th 16h) → −1.0 (18th 00h) → −4.6 (19th 04h) → −2.4…−2.9 (19th afternoon) → +1.35 (20th 00h). Over the same time, corr_y moves as follows: D-302-B 0.041 → 0.098 (19th 04h), back to 0.073–0.085; D-303-B 0.062 → 0.026 (19th 08h); D-304-B −0.069 → −0.086; P-301-B −0.009 → −0.033; D-306-B 0.058 → 0.022; D-303-C −0.139 → −0.182; D-304-C −0.487 → −0.540. D-301-C corr_x −0.09 → −0.064. All but D-306-B and D-302-B come back at once at the jump of 00:30. `overview.py --others`: the same shapes remain after removing the median of the others, so they are specific to these targets. Rigid fit: the target |residual| median rises only slightly. Error_value: at its level (the 19th 01:50 instant with 5 sensors is isolated). - **Images**: 19th 04:00 (zone thumbnail): nothing in front. 18th 07:00: work lights at the far end. - **Confidence**: medium-high on the event and its bounds (start ±2 h, a slow onset). The family is uncertain between Displacement and a lagging thermal effect of the camera. ### 2026-10-18T06:30Z → 2026-10-18T06:50Z (CLARIDEN-54) - **Phenomenon**: as on the 11th 09:00, in corr_x. - **Family**: Displacement (error_value flat). - **Measured**: group_flips: 7 targets at +3.2…+5.0 noises in corr_x at 06:40 (D-304-A 5.0, D-302_A 4.9, D-303-A 4.3, D-300-A 4.2, D-302-B/PR_BG 3.8, P-298-A 3.2). Rigid fit (base 06:00): tx ≈ 0, with PR-291 dx −0.06, PR-293 −0.03, PR-295 −0.03. The camera pan hits its minimum and the scale its maximum at 06:40 (overview, 16th–20th window). Back at 06:50. - **Images**: no image at 06:40; the 06:00 and 07:00 images exist, and 07:00 shows work lights at the far end. - **Confidence**: medium. ## 2. What I left without a label **Removed at the requalification (2026-11-17):** - **CLARIDEN-51**, 2026-10-11T14:00Z → 2026-10-13T02:00Z, Displacement (remainder of the slight straightening of the camera on D-306-B, D-304-B, D-303-B, D-302-B/PR_BG). `ranges.py --k 5`, corr_x and corr_y: over its own range, **no point of any sensor** beyond 5 noises (0 ranges on the 29 sensors). Against the level before (11th 06:00–14:00, `--outside` the label): corr_y none; corr_x a single isolated point of D-304-B at 13th 00:30, +5.4 noises, which is a one-step spike, not the vertical movement of the label. Against the level after (13th 02:00–14th 12:00): none. The step of D-306-B in corr_y on 2 h medians (from about 0.03 to 0.064 px, noise 0.0099–0.0122 px) is about 3 noises; D-304-B and D-303-B are smaller. It is a camera movement that the compensation absorbs almost entirely: under the threshold, ordinary noise of the station. **Kept near the threshold** (stated so the reader knows the margin): - CLARIDEN-50 (11th 09:00): D-304-A corr_y −5.3 noises (one measurement, `--rolling 6h`); D-301-A −6.7 and D-304-A −7.4 for the jump of 08:50→09:00. - CLARIDEN-54 (18th 06:40): D-302_A and D-304-A corr_x +5.4 noises each, at 06:40. - CLARIDEN-49 (return of row C): over its own range the median amplitude of the return is under 5 noises (12 h medians: D-301-C corr_x −0.043 → −0.085 px, about 3.6 noises; D-304-C corr_y −0.454 → −0.496, about 3.8; D-303-C −0.119 → −0.147, about 3); against its level after the return (16th 12:00–17th 16:00, `--outside` the label), D-301-C corr_x stays beyond 5 noises for 14 measurements on the 11th 12:00–18:10, extreme +6.1. It holds by the rule, at the margin; medium confidence. **Before the requalification** (unchanged): - One-measurement group flips of 5–7 targets at 3–4 noises (group_flips): 12th 01:00, 13th 21:30, 15th 09:00, 15th 13:30, 17th 03:40, 18th 06:00, 18th 09:50 (just after CLARIDEN-18), 19th 13:00. None reaches 5 noises on any target. They are the ordinary jitter of the pose (the rotation scatters by about ±0.002° from one measurement to the next). The 19th 04:20 instant (8 targets, max 4.1) falls inside the tilt label. - Isolated single-sensor spikes at ≈5 noises (P-299-B corr_x 15th 03:20, D-300-C corr_y 11th 02:00, P-299-A corr_y 15th 05:10, PR-284 corr_x 18th 11:20): on noisy targets (noise 0.01–0.03 px), single points within what each sensor does elsewhere. - The housing temperature dip of the 18th 08:00–10:00 is inside CLARIDEN-18. On its own, it moves only the pose already labeled. ## 3. The documentation - Helpful: `families.md` "The camera tilts little by little" and `reading-rules.md` §5 ("A drift specific to a few targets that follows the camera, on the same dates, is the scene deforming with it"). Also labeling-rules §2 ("bounds are measurement instants", "a plateau is not a return", "a lasting jump is bounded on the jump") and §3 ("A deviation specific to targets, mixed with a camera movement, is the same event if it follows it in both directions"). - The precedents BREITHORN-2 and BREITHORN-11 gave the family and the wording. - Reading rule "A jump is judged against the neighbours / the past of the target" was decisive for CLARIDEN-22: most of its jumps are returns. - The validator did not flag the off-cadence bounds (22:45, 13:45, 10:15, 20:45, 00:15, 00:45): perhaps it could check against the station cadence. - Contradicted: CLARIDEN-14 and CLARIDEN-15 said "No camera movement", but the camera tilt does move by a few thousandths of a degree over days. This is small next to "a few hundredths" (DATA.md orders of magnitude), but enough to leave remainders of several noises on some targets. `stations.md` lists four references for CLARIDEN, while PR-296 is a fifth global reference retained at every instant. - The catalogue entry "The camera drifts away when the temperature of its housing drops, without a daily cycle" was tempting. The test "comes back at equal temperature" rejected it here. ## Requalification Rule applied: a movement of the corr is kept if at least one target deviates by more than 5 of its own noises over the label's range (`tools/scripts/ranges.py --k 5`); for a slow drift the level is also taken outside the label (`--outside`, before and/or after), since its own median sits in the middle of the drift; No data is kept only when no sensor is measured. Outputs in `work/rq_*.txt`. | id | bounds | family | command (all `python3 tools/scripts/ranges.py data/CLARIDEN --columns corr_x,corr_y`) | value | verdict | |---|---|---|---|---|---| | CLARIDEN-49 | 11th 06:00 → 16th 12:00 | Displacement | `--start 2026-10-11T06:00Z --end 2026-10-17T16:00Z --outside 2026-10-11T06:00Z/2026-10-16T12:00Z` | D-301-C corr_x, 14 measurements beyond 5, max +6.1 (11th 13:00); own window: one point 5.4 | kept, **rewritten** (it named CLARIDEN-51 "labeled separately"); loses nothing (it had no review) | | CLARIDEN-50 | 11th 08:50 → 09:10 | Displacement | `--rolling 6h --start 2026-10-11T00:00Z --end 2026-10-11T20:00Z` | D-304-A corr_y −5.3 at 09:00 | kept | | CLARIDEN-51 | 11th 14:00 → 13th 02:00 | Displacement | own range; `--outside` before (11th 06:00–14:00) and after (13th 02:00–14th 12:00) | no target beyond 5 in corr_y; one isolated corr_x point (D-304-B 5.4); about 3 noises on medians | **removed** | | CLARIDEN-52 | 15th 22:50 → 16th 10:30 | No data | `inventory.py --start/--end` | 69 steps absent for all sensors | kept | | CLARIDEN-17 | 16th 14:20 → 14:40 | No data | idem | 1 step absent for all sensors | kept (review 2026-11-17) | | CLARIDEN-53 | 17th 16:00 → 20th 00:30 | Displacement | `--start 2026-10-16T12:00Z --end 2026-10-20T04:00Z --outside 2026-10-17T16:00Z/2026-10-20T00:30Z` | D-303-B corr_y runs of 3–7 measurements beyond 5 through the 19th, max −7.4 (19th 12:00); D-304-C −6.8, D-303-C −6.1, D-302-B +5.8 | kept | | CLARIDEN-54 | 18th 06:30 → 06:50 | Displacement | `--rolling 6h --start 2026-10-18T00:00Z --end 2026-10-18T13:50Z` | D-302_A and D-304-A corr_x +5.4 at 06:40 | kept | | CLARIDEN-55 | 18th 08:50 → 09:30 | Visibility | idem | D-302-B/PR_BG corr_y +11.8, D-301-C corr_x −8.1, P-301-B corr_x +6.8 | kept | | CLARIDEN-56 | 18th 13:50 → 23:30 | No data | inventory | 57 steps absent for all sensors | kept | | CLARIDEN-57 | 19th 09:00 → 10:10 | No data | inventory | 4 steps absent for all sensors, between single measurements | kept | | CLARIDEN-58 | 19th 20:40 → 21:30 | No data | inventory | 3 steps absent for all sensors | kept | | CLARIDEN-59 | 20th 00:10 → 00:40 | Displacement | `--start 2026-10-19T18:00Z --end 2026-10-20T04:00Z --outside 2026-10-20T00:10Z/2026-10-20T04:00Z` | D-306-B corr_y 18 measurements beyond 5, max +7.4 | kept | No label of the range was a missing-points label or a thermal label. The validator reports 0 errors and 3 overlaps (two short events inside the drifts 49 and 53, and the jump 59 at the end of 53): distinct events, kept. ## Difficulties - The instructions file changed during the work (the weather moved to `data//weather/`); neither source has CLARIDEN. - The regression part of `scripts/tilt_vs_targets.py` printed nothing: the timestamps of the displacement and camera files differ by seconds. The 2 h tables were enough. ## Sources read `instructions/analyst.md`, `tools/GUIDE.md`, `tools/DATA.md`, `labeling/families.md`, `labeling/labeling-rules.md`, `labeling/reading-rules.md`, `labeling/stations.md`, `labeling/auto/CLARIDEN.jsonl` (labels 10–25 at the edges), `work/existing.jsonl`, `work/spanning.jsonl`, precedents (WILDSTRUBEL-83/102/71/47/55/200, BREITHORN-2/11, SNCF01-7, NEBRASKA-1). Tools: inventory, overview (range; 16th–20th with --others and --rigid; 19th–20th and 18th at 10 min; 11th and 18th with --rigid), summary, plot, metrics, ranges (--rolling 12), thumbnails (zone); my scripts `scripts/tilt_vs_targets.py`, `scripts/group_flips.py`, `scripts/fig_tilt.py`. Images: 18th 08:00 and 09:00 whole; zone thumbnails 11th 09:00, 13th 12:00, 18th 07:00, 19th 04:00, 20th 00:00, 20th 01:00. Requalification: `instructions/analyst.md`, `labeling/labeling-rules.md` (in full), `work/requalify_input.jsonl`, this analysis and `report.md` before rewriting; tools `inventory.py`, `ranges.py`, `summary.py` (12 h medians of row C).