# The thermal cycle: what is raw, what is compensated, what remains - **Date**: 2026-10-24 (point 13 of the morning-journal plan). **Sources**: detector `detectors/thermique.py` (2026-10-23; today `detectors/scripts/thermal_displacement.py`), draft of a 24 h sinusoid (2026-10-24, point 41), the user. ## What the user (the expert) says about it - Some structures move a lot during the day through **thermal expansion**, and come back down at night through **contraction**: one then sees **big waves** on the curves. These waves are **entirely normal**. - He no longer remembers the project that showed it (perhaps one of those sent, perhaps turbulence). None of the six sets received shows big waves in the corrected curves. - The wave is an event in its own right, of expansion (rise) or contraction (descent); a "periodic effect" that explains it is an idea he wants to keep (point 41 of the plan). ## What the data show | | Raw positions (`x`, `y`) | Corrected curves (`corr_x`, `corr_y`) | |---|---|---| | 24 h wave | almost everywhere, all targets together: 0.8 px at NORDEND (October), 1.8 px (July), 3.2 px at WILDSTRUBEL, 4.6 px at NIEDERHORN | only at PS des Coudres: 11 targets out of 11, 0.17 px, 08:00 → 18:00 UTC; about 1 mm, up to 2 mm on PM_C and PM_D in the hourly export | | Cause | the camera or its mast bending (common mode) | the targets really move relative to the references: expansion of the structure or incomplete compensation, not settled | - **The compensation removes the camera's wave.** The client does not see it; we do not tell him about it (decision of 2026-10-24). - **NORDEND of October** keeps a small cycle (9 targets out of 19, 0.02 px, about 1 mm): not flagged (decision of 2026-10-24); the sinusoid does not find it either. - **CLARIDEN** has no cycle over 3 days, even raw (not explained). ## A 24 h sinusoid to recognize it (draft of 2026-10-24) Per target and per axis, `a + b·sin(2πt/24 h) + c·cos(2πt/24 h)` by least squares; R² = share of the curve explained. | Set | Corrected: axes with R² ≥ 0.3 | Raw: axes with R² ≥ 0.3 | |---|---|---| | PS des Coudres | 14 / 22 (0.16 px, peak around 08 h UTC) | 24 / 24 | | NORDEND October | 0 / 38 | 18 / 38 | | NORDEND July | 1 / 38 | 33 / 38 (1 px, peak around 11 h) | | WILDSTRUBEL | 1 / 14 | 4 / 14 | | CLARIDEN | 0 / 48 | 0 / 48 | | NIEDERHORN | 14 / 40 (to check: 3 days, two rainy nights at the same hours) | 2 / 60 | The sinusoid separates the station with a wave (PS des Coudres) from the others, and a real movement (CLARIDEN) does not pass for a wave. **In the journal (point 41, 2026-10-24)**: `thermique.py` requires its two methods (repeated profile and sinusoid); at PS des Coudres, every day from 09 to 13/10, "Thermal expansion" 08:00 → 15:00 then "Thermal contraction" 15:00 → 18:00 (15:00: largest gap to the night level); nothing elsewhere.