6.6 KiB
CLARIDEN: verification of the labels, 11–20 October
You asked me to verify the 8 existing labels of 11 October 00:00 → 20 October 04:00 (UTC): keep, correct, remove or add.
In short
One label holds as is, seven needed corrections (mostly bounds), and four labels were added. The main miss: the camera slowly tilts on the 11th–13th and the 17th–20th, and the corrected curves of a few targets follow it. Between the 17th and the 20th, do not read the vertical drift of D-302-B, D-303-B, D-304-B, P-301-B, D-306-B, D-303-C and D-304-C as a movement. No real movement of the structure is established; the jumps of D-306-B and D-302-B on the 20th remain to be checked.
Verification
Kept 1, corrected 7, removed 0, added 4.
- CLARIDEN-15: the end moves from the 20th 00:20 to the 16th 12:00. The return of row C is complete on the 16th; after that the curves are flat. Their dip of the 18th–19th follows the camera tilt (new label). The description no longer says "no camera movement".
- CLARIDEN-16: start 22:45 → 22:50, the last measurement before the gap (the station measures every 10 min).
- CLARIDEN-18: start 09:00 → 08:50. At 09:00 the row A targets already jump vertically. The description now names them and says that the 09:00 image shows nothing in front.
- CLARIDEN-19: start 13:45 → 13:50, the last measurement before the gap.
- CLARIDEN-20: end 10:15 → 10:10, the first measurement after the gaps.
- CLARIDEN-21: start 20:45 → 20:40, the last measurement before the gap.
- CLARIDEN-22: bounds 00:15→00:45 → 00:10→00:40 (measurement instants; the scene starts moving at 00:20). The old description was wrong on most of the jumps. Most of them bring D-303-C, D-304-C, D-304-B, D-303-B and P-301-B back to where they were before the 17th. Only D-306-B (vertically) and D-302-B/PR_BG (horizontally) keep a new level.
- Added: the camera straightens slowly, 11th 14:00 → 13th 02:00.
- Added: the camera tilts slowly, 17th 16:00 → 20th 00:30.
- Added: a one-measurement jump of many targets, 11th 09:00 (vertical).
- Added: a one-measurement jump of many targets, 18th 06:40 (horizontal).
- Spanning CLARIDEN-1 (P-300-B always rejected): correct in the range.
- Spanning CLARIDEN-14: correct in the range (11th 00:00–06:00). Just before the range, though, its "no camera movement" is contradicted: the camera tilts from the 9th to the 11th, and D-306-B follows it.
What happened
The camera tilts slowly, and the compensation does not follow evenly. From the 11th to the 13th the camera straightens a little. From the 17th to the 19th it tilts the other way, more strongly after the power cut of the 18th, then partly comes back on the 19th. All raw positions, references included, move together. A few targets do not get the same correction as the others. Vertically, D-302-B rises while D-303-B, D-304-B, P-301-B, D-306-B, D-303-C and D-304-C go down, by a few hundredths of a pixel, following the tilt step by step. They come back at once when the camera jumps back on the 20th. The housing temperature varies little, and the tilt does not come back at equal temperature, so a thermal link is not established. Cause: likely an incomplete compensation of a camera movement, as at BREITHORN.
Top: the camera tilt; bottom: the vertical curves of five targets. In the grey zones they move with the tilt, and they jump back with it on the 20th.
The camera jumps on the 20th, shortly after midnight. The whole scene shifts in two measurements. Most targets come back to their normal level (see above). D-306-B jumps up beyond its usual level and stays there; D-302-B/PR_BG jump sideways and stay there. Work lights are visible at the far end of the tunnel on the images around it. The cause is unknown.
Short disturbances. On the 18th 08:50–09:30, a three-measurement bump on many targets comes with a rise of the recognition error on most sensors: likely reduced visibility, not seen on the image. On the 11th 09:00 and the 18th 06:40, many targets jump together for a single measurement. The references move slightly against each other, which skews the correction. The cause is unknown; these points are to be ignored.
Gaps. Four gaps: the night of the 15th–16th, a short one on the 16th, and two on the 19th. They are common to several stations. A power cut on the 18th from 13:50 to 23:30. All as already labeled; only the bounds were set on the measurement instants.
What to do
Check the camera mount and its fixing, since its tilt wanders by small amounts over days and jumped on the 20th. Compare D-306-B and D-302-B after the 20th with the other measurements of the site.
Not established
- The cause of the slow tilt: a thermal effect with a delay is possible, but the temperature does not explain it at equal value. Watching the tilt against the housing temperature over more weeks would settle it.
- The cause of the jump of the 20th, and whether the new level of D-306-B and D-302-B is real. Tunnel work at that time is the hypothesis to check with the site.
Labels
| Start (UTC) | End (UTC) | Family | Targets | In a few words |
|---|---|---|---|---|
| 2026-10-11 06:00 | 2026-10-16 12:00 | Displacement | D-301-C, D-303-C, D-304-C | slow return of row C, ends on the 16th (corrected) |
| 2026-10-11 08:50 | 2026-10-11 09:10 | Displacement | row A, D-301-C, D-302-B/PR_BG, P-299-B… | one measurement, compensation skewed (added) |
| 2026-10-11 14:00 | 2026-10-13 02:00 | Displacement | D-306-B, D-304-B, D-303-B, D-302-B/PR_BG | camera straightens slowly, remainder on a few targets (added) |
| 2026-10-15 22:50 | 2026-10-16 10:30 | No data | all | night gap, common to the stations (bounds corrected) |
| 2026-10-16 14:20 | 2026-10-16 14:40 | No data | all | one missing measurement (kept) |
| 2026-10-17 16:00 | 2026-10-20 00:30 | Displacement | D-302-B/PR_BG, D-303-B, D-304-B, P-301-B, D-306-B, D-303-C, D-304-C | camera tilts slowly, remainder on a few targets (added) |
| 2026-10-18 06:30 | 2026-10-18 06:50 | Displacement | row A, D-302-B/PR_BG | one measurement, compensation skewed (added) |
| 2026-10-18 08:50 | 2026-10-18 09:30 | Visibility | row A, D-302-B/PR_BG, D-301-C, P-301-B, D-303-B | short bump with recognition error up (corrected) |
| 2026-10-18 13:50 | 2026-10-18 23:30 | No data | all | power cut (bounds corrected) |
| 2026-10-19 09:00 | 2026-10-19 10:10 | No data | all | common gaps (bounds corrected) |
| 2026-10-19 20:40 | 2026-10-19 21:30 | No data | all | common gaps (bounds corrected) |
| 2026-10-20 00:10 | 2026-10-20 00:40 | Displacement | D-306-B, D-302-B/PR_BG, D-303-C, D-304-C, D-304-B, D-303-B, P-301-B | camera jump; most targets come back, D-306-B and D-302-B keep a jump (corrected) |
