4.2 KiB
4.2 KiB
Labels: FLORIDA, 2026-10-11T09:45Z → 2026-10-22T03:15Z (UTC)
Verification of the 23 existing labels: 23 kept, 0 corrected, 0 removed, 5 added. The work was cut short by the usage limit: the checks listed under "Not checked" were not done.
Weather: there is no weather/ folder for FLORIDA, so no weather is available.
Verdict per old id
- FLORIDA-23 kept: r1_r is rejected at 10:00 and there is no pose at that instant (inventory).
- FLORIDA-24, 25, 26, 28, 31, 33, 36, 38, 44 kept. In the hourly pose (metrics.py), pan, tilt and scale follow the housing temperature. They start and come back within one or two measurements of the bounds (pan near -0.033 at night and -0.05 to -0.056 at the peak; scale from 1.0005 to 1.0015).
- FLORIDA-41 kept, with a doubt. In the hourly pose, the tilt starts falling and the scale rising from 08:00, before the gap at 09:00 (tilt 0.0098 at 07:00, 0.0057 at 08:00, 0.0026 at 10:00). The cycle may therefore start around 07:45 rather than 10:45. This was not checked at the native step.
- FLORIDA-27, 29, 32, 34, 35, 40, 42 kept: their bounds match the gaps listed by the inventory exactly. The claims about other stations were not re-checked.
- FLORIDA-30 kept (not re-checked at the native step).
- FLORIDA-37 and FLORIDA-39 kept: they cover all the rejections of p1_r, r1_r, Sellette 4, Sellette 5 and Pont Ernen on the 18th and 19th, and the missing poses.
- FLORIDA-43 kept: Sellette 5 is rejected at 05:30 and 05:45 and is back at 06:00.
- FLORIDA-45 kept: the last rejections are r1_r at 18:15 and Pont Ernen at 18:00. From 18:30 the pose is back, at the cold level. After that, Sellette 4's corr_x stays a little lower (about 0.075 against 0.11 the night before), which is one or two noise widths: not labeled.
- Spanning FLORIDA-1 and FLORIDA-14: consistent with the rejections of Sellette 6 and Massif 2 in the range (inventory).
1. My labels (added)
2026-10-12T00:30Z → 01:00Z, 01:45Z → 03:00Z, 03:45Z → 04:30Z, 06:15Z → 06:45Z, 22:15Z → 22:45Z
- Phenomenon of the catalogue: closest is "a target latches onto another spot", here applied to a reference; no exact match.
- Precedents: JUNGFRAU-7 and FLORIDA-51 (a reference poorly seen at night distorts the pose: Visibility). Not followed, because here p1_r's error_value does not rise.
- Family: Obstruction, because the cause is a local point beside one spot, not the whole scene. The nature of the point is not established: medium confidence.
- Measured: the jumps are at 00:45, 02:00, 02:45, 04:00 and 06:30 on the 12th, then 22:30. Sellette 4 corr_x rises by about 0.15 to 0.2, which is 5 to 9 noise widths. In the rigid fit on the targets (
overview.py --rigidfrom 00:30), p1_r moves by about -0.1 to -0.19 px in dx while the targets stay still. p1_r's error_value stays flat (0.38 to 0.46). - Images: the fixed-frame thumbnails at 01:00, 02:00, 03:00 and 04:00 show a small bright point at the upper left of p1_r at 01:00 and 03:00 (no jump), absent at 02:00 and 04:00 (jump). Copied to
p1_r_point.png. - Confidence: medium.
2. What I left without a label
- Isolated deviations of 3 to 4 noise widths (14/10 21:00, 21/10 21:15–22:45, and a few others): too small.
- The night of 21–22: the pose sits at a colder level that matches the temperature (tilt +0.02 and scale 1.0002 at 16–17 °C, the same relation as on the other nights). The corrected curves are flat apart from the small offset of Sellette 4 noted above.
3. The documentation
- The
--rigidmode ofoverview.pywas decisive: it showed that the reference moves, not the targets. - Outside the range: FLORIDA-46 says "the camera does not move", but at 03:30 on the 22nd the pose jumps and Sellette 5 jumps for one measurement too.
Not checked (cut short)
- FLORIDA-41 start at the native step.
- FLORIDA-30 at the native step.
- The other stations for the No data labels.
Difficulties
- The usage limit cut the verification short.
Sources read
instructions/analyst.md, tools/GUIDE.md, tools/DATA.md, labeling/families.md, labeling-rules.md, reading-rules.md, stations.md, labeling/auto/FLORIDA.jsonl (labels around the range), precedents.py, inventory, overview (with rigid), metrics, days, ranges, scripts/native.py, scripts/uncovered.py, thumbnails of 12/10.