Files
aimsight-labeling/auto/analyses/MICHIGAN_2026-10-23T2000_2026-11-01T0000/report.md
T

3.8 KiB

MICHIGAN: check of the labels of 23 October to 1 November

You asked to check the six labels already written on 23 October 20:00 → 1 November 00:00 (UTC): keep, correct, remove or add.

In short

Five labels hold, one has its end moved by one measurement, one small event was missing (31 October). The curves are not to be trusted on the cold mornings (24, 26, 28, 29, 30 and, a little, 31 October) and on 27 October. No real movement of the structure is seen: the targets never move relative to each other.

Verification

Kept 5, corrected 1, removed 0, added 1.

  • MICHIGAN-10: end moved from 24 October 20:00 to 25 October 00:00, description updated: at 20:00 the corrected curve in x of all the targets is at its lowest and the camera scale is still low; both come back only at midnight.
  • Added: 31 October 00:00 → 16:00, Thermal displacement: a small drop of the camera housing temperature, the camera nods forward a little and the corrected curve in y of all the targets dips for three measurements, the same pattern as on 24 October, weaker.
  • Spanning labels MICHIGAN-3 (reference REFPOU22 lost) and MICHIGAN-7 (camera tilting over the month): both correct within this range, nothing to change.

What happened

Cold mornings move the camera (24, 26, 28, 29, 30, 31 October). Each time the temperature inside the camera housing drops by one to four degrees, the camera nods forward and its image shrinks slightly. All the targets shift together in the image. Since the camera correction now rests on only two reference prisms, a small part of this movement passes into all the corrected curves, in x and y together: a little on 24, 26 and 31 October, strongly on 28 to 30 October, when the housing was coldest. The curves come back when the housing warms up. Cause confirmed by the curves, the camera position and the temperature; the images show nothing in front of the targets.

27 October: the curves rise in y without the temperature changing (cause unknown). The corrected curves in y of all the targets rise during the night and morning, then come back in the evening. The targets do not move in the image; the camera correction moves, from the two reference prisms. The neighbouring cameras in the same building stay still that day.

The corrected curves of five targets in x (top) and y (bottom); grey: the labels

Look at the grey bands: all the targets dip together in each band and come back after it; the deepest dips (29 and 30 October) match the coldest housing.

Housing temperature, average shift of the targets and camera position

Look at the black temperature line: each dip goes with a rise of the camera tilt and a dip of the targets' curves.

What to do

Nothing new for this range. As already said for the month: restore the reference REFPOU22 on site; with three references again, these camera movements would stay out of the curves.

Not established

The cause of the rise of 27 October: the temperature does not explain it. Watching whether it comes back with the restored third reference would settle it.

Labels

Start (UTC) End (UTC) Family Targets In a few words
2026-10-23 20:00 2026-10-25 00:00 Thermal displacement all small cold spell, curves dip in y then in x
2026-10-25 16:00 2026-10-26 16:00 Thermal displacement all cold night, dip in y then x
2026-10-26 20:00 2026-10-27 20:00 Displacement all rise in y, cause unknown
2026-10-28 00:00 2026-10-28 16:00 Thermal displacement all cold morning, dip in x and y
2026-10-28 16:00 2026-10-29 16:00 Thermal displacement all coldest night, strong dip
2026-10-29 16:00 2026-10-30 12:00 Thermal displacement all cold night, strong dip
2026-10-31 00:00 2026-10-31 16:00 Thermal displacement all small cold morning, small dip in y