50 lines
36 KiB
JSON
50 lines
36 KiB
JSON
{"start": "2026-08-10T01:15Z", "end": "2026-08-10T02:30Z", "family": "Obstruction", "description": "At night, PR12 alone departs on corr_x for about an hour, then comes back; its corr_y and the other targets do not move. On the images from 01:30 to 02:30, blurred shapes lit by the infrared, changing from one image to the next, pass very close to the lens, including a band crossing the target area at 02:00: an animal in front of the camera, spider or insect (its nature is not established). At the same time, the error_value of almost all the sensors rises a little, without any rejection, and the camera pose moves slightly, well compensated. The structure does not move: ignore PR12's curve over the range, nothing to do.", "review": "2026-11-17"}
|
|
{"start": "2026-08-10T05:30Z", "end": "2026-08-10T06:00Z", "family": "Visibility", "description": "A CTR01 point (local reference, treated as a target) is missing at sunrise: its measurement is rejected for one acquisition (error_value just above the threshold), then comes back. The rising sun is in the camera's field, with reflections, and the scene is very dark (seen on the 05:45 image). Probable cause: dazzle from the rising sun. The other targets remain measured. Point to ignore, nothing to do.", "review": "2026-11-17"}
|
|
{"start": "2026-08-10T05:30Z", "end": "2026-08-11T05:45Z", "family": "Thermal displacement", "description": "Thermal displacement of the camera, poorly compensated. At sunrise, the sun enters the camera's field, facing it (seen on the 05:45 image). The camera heats up all at once (housing temperature sharply up at the same moment): its pose jumps (tilt, pan, scale) and the raw positions of all the targets and references move together, then drift throughout the day. The corrected curves are not flattened: corr_x of PR14 to PR18 drops at once then slowly rises back, especially PR18 and PR16; corr_y of PR18 rises; in the morning, those of PR02, PR03, PR05, PR12 and of the references CTR02, CTR03, CTR04 also depart; in the afternoon, those of PR01 and PR11 rise. Most curves come back in early afternoon, PR16 and PR18 only in the night. The return continues slowly in the evening and all night: the pan and the corr_x of PR18 and PR16 still rise back until the jump of the next morning. No reference lost, ordinary error_value (the rejections of CTR01 are labelled separately). Deduced cause: the pose and the housing temperature follow the sun, and the rock face cannot move with the temperature. Nothing to do, this is not a movement of the structure.", "review": "2026-11-17"}
|
|
{"start": "2026-08-10T13:30Z", "end": "2026-08-10T17:00Z", "family": "Visibility", "description": "CTR01 (local reference, treated as a target) is rejected without interruption in the afternoon: its corr_x and corr_y curves are missing. Its error_value rises from late morning, crosses the threshold, then drops all at once to its night level when the wall goes back into shadow. Same hour and same signature as 12/08, where the thumbnails show the sun on the rock around the target. The other targets remain measured and their curves show nothing of their own. The structure does not move: nothing to do, CTR01's curve is missing every sunny afternoon.", "review": "2026-11-17"}
|
|
{"start": "2026-08-11T05:45Z", "end": "2026-08-12T05:45Z", "family": "Thermal displacement", "description": "Thermal displacement of the camera, poorly compensated. At sunrise, the sun is in the camera's field, facing it (seen on the 06:30 image). The camera heats up all at once (housing temperature sharply up at the same moment): its pose jumps (tilt, pan, scale) and the raw positions of all the targets and references move together, then drift throughout the day. The corrected curves are not flattened: corr_x of PR14 to PR18 drops at once then slowly rises back, especially PR18 and PR16; corr_y of PR18 rises; in the morning, those of PR03, PR05, PR06, PR13 and of the references CTR02, CTR04 also depart; in the afternoon, those of PR01 and PR11 rise. Most curves come back in early afternoon, PR16 and PR18 in the night. The return continues slowly in the evening and all night: the pan and the corr_x of PR18 and PR16 still rise back until the jump of the next morning. No reference lost, ordinary error_value (the rejections of CTR01 are labelled separately). Deduced cause: the pose and the housing temperature follow the sun, and the rock face cannot move with the temperature. Nothing to do, this is not a movement of the structure.", "review": "2026-11-17"}
|
|
{"start": "2026-08-11T06:15Z", "end": "2026-08-11T06:45Z", "family": "Visibility", "description": "A CTR01 point (local reference, treated as a target) is missing at sunrise: its measurement is rejected for one acquisition (error_value just above the threshold), then comes back. The rising sun is in the camera's field, with reflections, and the scene is very dark (seen on the 06:30 image). Probable cause: dazzle from the rising sun. The other targets remain measured. Point to ignore, nothing to do.", "review": "2026-11-17"}
|
|
{"start": "2026-08-11T12:45Z", "end": "2026-08-11T17:00Z", "family": "Visibility", "description": "CTR01 (local reference, treated as a target) is rejected a first time in early afternoon, then without interruption in the afternoon: its corr_x and corr_y curves are missing. Its error_value rises from late morning, crosses the threshold, then drops all at once to its night level when the wall goes back into shadow. Same hour and same signature as 12/08, where the thumbnails show the sun on the rock around the target. The other targets remain measured and their curves show nothing of their own. The structure does not move: nothing to do, CTR01's curve is missing every sunny afternoon.", "review": "2026-11-17"}
|
|
{"start": "2026-08-12T05:45Z", "end": "2026-08-12T06:15Z", "family": "Visibility", "description": "A CTR01 point (local reference, treated as a target) is missing at sunrise: its measurement is rejected for one acquisition (error_value just above the threshold), then comes back. The rising sun is in the camera's field, with reflections, and the scene is very dark (seen on the 06:00 image). Probable cause: dazzle from the rising sun. The other targets remain measured. Point to ignore, nothing to do.", "review": "2026-11-17"}
|
|
{"start": "2026-08-12T05:45Z", "end": "2026-08-13T05:45Z", "family": "Thermal displacement", "description": "Thermal displacement of the camera, poorly compensated. At sunrise, the sun enters the camera's field, facing it (seen on the 05:45, 06:00 and 07:00 images). The camera heats up all at once (housing temperature sharply up at the same moment): its pose jumps (tilt, pan, scale) and the raw positions of all the targets and references move together, then drift throughout the day. The corrected curves are not flattened: corr_x of PR14 to PR18 drops at once then slowly rises back, especially PR18 and PR16; corr_y of PR18 rises; in the morning, those of PR02, PR03, PR05, PR12 and of the references CTR02, CTR03, CTR04 also depart. In late afternoon, when the pose goes back in the opposite direction, a second, weaker bump affects PR18, PR16 and, on the other side, PR01, PR05, PR10. The return continues slowly in the evening and all night: the pan and the corr_x of PR18 and PR16 still rise back until the jump of the next morning. No reference lost, ordinary error_value (the rejections of CTR01 are labelled separately). Deduced cause: the pose and the housing temperature follow the sun, and the rock face cannot move with the temperature. Nothing to do, this is not a movement of the structure.", "review": "2026-11-17"}
|
|
{"start": "2026-08-12T13:30Z", "end": "2026-08-12T17:00Z", "family": "Visibility", "description": "CTR01 (local reference, treated as a target) is rejected without interruption in the afternoon: its corr_x and corr_y curves are missing. Its error_value rises from late morning, crosses the threshold, then drops all at once to its night level when the wall goes back into shadow. Seen on the thumbnails: at 13:30 the shadow recedes on the rock around the target, at 14:30 and 16:00 the rock in full sun is as bright as the spot, which drowns in it; at 17:15 the area is in shadow again and the spot sharp. The other targets remain measured and their curves show nothing of their own. The structure does not move: nothing to do, CTR01's curve is missing every sunny afternoon.", "review": "2026-11-17"}
|
|
{"start": "2026-08-13T05:45Z", "end": "2026-08-13T06:15Z", "family": "Visibility", "description": "A CTR01 point (local reference, treated as a target) is missing at sunrise: its measurement is rejected for one acquisition (error_value just above the threshold), then comes back. Same hour and same signature as the other mornings, when the rising sun is seen in the camera's field. Probable cause: dazzle from the rising sun. The other targets remain measured. Point to ignore, nothing to do.", "review": "2026-11-17"}
|
|
{"start": "2026-08-13T05:45Z", "end": "2026-08-14T05:45Z", "family": "Thermal displacement", "description": "Thermal displacement of the camera, poorly compensated. At sunrise, same signature as the other mornings, when the sun is seen in the camera's field. The camera heats up all at once (housing temperature sharply up at the same moment): its pose jumps (tilt, pan, scale) and the raw positions of all the targets and references move together, then drift throughout the day. The corrected curves are not flattened: corr_x of PR14 to PR18 drops at once then slowly rises back, especially PR18 and PR16; corr_y of PR18 rises, those of PR01, PR02, PR03 and of the references CTR02, CTR03, CTR04 also depart. One of the strongest days of the batch. In late afternoon, when the pose goes back in the opposite direction, a second, weaker bump affects PR18, PR16 and, on the other side, PR01, PR05, PR10. The return continues slowly in the evening and all night: the pan and the corr_x of PR18 and PR16 still rise back until the jump of the next morning. No reference lost, ordinary error_value (the rejections of CTR01 are labelled separately). Deduced cause: the pose and the housing temperature follow the sun, and the rock face cannot move with the temperature. Nothing to do, this is not a movement of the structure.", "review": "2026-11-17"}
|
|
{"start": "2026-08-13T13:30Z", "end": "2026-08-13T17:00Z", "family": "Visibility", "description": "CTR01 (local reference, treated as a target) is rejected without interruption in the afternoon: its corr_x and corr_y curves are missing. Its error_value rises from late morning, crosses the threshold, then drops all at once to its night level when the wall goes back into shadow. Same hour and same signature as 12/08, where the thumbnails show the sun on the rock around the target. The other targets remain measured and their curves show nothing of their own. The structure does not move: nothing to do, CTR01's curve is missing every sunny afternoon.", "review": "2026-11-17"}
|
|
{"start": "2026-08-14T05:45Z", "end": "2026-08-14T06:30Z", "family": "Visibility", "description": "A CTR01 point (local reference, treated as a target) is missing at sunrise: its measurement is rejected for two acquisitions in a row (error_value just above the threshold), then comes back. Same hour and same signature as the other mornings, when the rising sun is seen in the camera's field. Probable cause: dazzle from the rising sun. The other targets remain measured. Point to ignore, nothing to do.", "review": "2026-11-17"}
|
|
{"start": "2026-08-14T05:45Z", "end": "2026-08-15T05:15Z", "family": "Thermal displacement", "description": "Thermal displacement of the camera, poorly compensated. At sunrise, same signature as the other mornings, when the sun is seen in the camera's field. The camera heats up all at once (housing temperature sharply up at the same moment): its pose jumps (tilt, pan, scale) and the raw positions of all the targets and references move together, then drift throughout the day. The corrected curves are not flattened: corr_x of PR14 to PR18 drops at once then slowly rises back, especially PR18 and PR16; corr_y of PR18 rises, those of PR01, PR02, PR03 and of the references CTR02, CTR03, CTR04 also depart. One of the strongest days of the batch. In late afternoon, when the pose goes back in the opposite direction, a second, weaker bump affects PR18, PR16 and, on the other side, PR01, PR05, PR10. The return continues slowly in the evening and all night: the pan still rises back until the jump of the next morning; the corrected curves, however, are almost back as early as the evening. No reference lost, ordinary error_value (the rejections of CTR01 are labelled separately). Deduced cause: the pose and the housing temperature follow the sun, and the rock face cannot move with the temperature. Nothing to do, this is not a movement of the structure.", "review": "2026-11-17"}
|
|
{"start": "2026-08-14T13:30Z", "end": "2026-08-14T17:00Z", "family": "Visibility", "description": "CTR01 (local reference, treated as a target) is rejected without interruption in the afternoon: its corr_x and corr_y curves are missing. Its error_value rises from late morning, crosses the threshold, then drops all at once to its night level when the wall goes back into shadow. Same hour and same signature as 12/08, where the thumbnails show the sun on the rock around the target. The other targets remain measured and their curves show nothing of their own. The structure does not move: nothing to do, CTR01's curve is missing every sunny afternoon.", "review": "2026-11-17"}
|
|
{"start": "2026-08-15T01:00Z", "end": "2026-08-15T01:30Z", "family": "No data", "description": "No measurement for one acquisition, at night: all the curves are missing. The image of that instant exists, the station synchronised at the same moment (last_sync) and its voltage is normal: neither power cut nor loss of link; the measurement of that instant was simply not produced or exported, cause not established. The same one-measurement gap comes back around the same hour on other nights, outside the batch. The curves resume at the next measurement: nothing to do.", "review": "2026-11-17"}
|
|
{"start": "2026-08-15T05:15Z", "end": "2026-08-16T06:30Z", "family": "Thermal displacement", "description": "Thermal displacement of the camera, poorly compensated. At sunrise, same jump as the other mornings. The camera heats up all at once (housing temperature sharply up at the same moment): its pose jumps (tilt, pan, scale) and the raw positions of all the targets and references move together, then drift throughout the day. The corrected curves are not flattened: corr_x of PR14 to PR18 drops at once then slowly rises back, especially PR18 and PR16; corr_y of PR18 rises; in the morning, those of PR01, PR02, PR03, PR09, PR10 and of the references CTR02, CTR04 also depart. Cloudy day (clouds seen on the 10:00 image): the sun comes and goes, the housing temperature drops in late morning then rises again, and the pose and the corrected curves move in jolts; the excursion is weaker than on the previous days. The return continues slowly in the evening and all night: the pan still rises back until the jump of the next morning; the corrected curves, however, are almost back as early as 19:00. No reference lost, ordinary error_value (the rejections of CTR01 are labelled separately). Deduced cause: the pose and the housing temperature follow the sun, and the rock face cannot move with the temperature. Nothing to do, this is not a movement of the structure.", "review": "2026-11-17"}
|
|
{"start": "2026-08-15T13:00Z", "end": "2026-08-15T17:00Z", "family": "Visibility", "description": "CTR01 (local reference, treated as a target) is rejected intermittently in the afternoon: its corr_x and corr_y curves are missing. Its error_value rises from late morning, crosses the threshold, then drops all at once to its night level when the wall goes back into shadow. Cloudy day (10:00 image): the rejections follow the sun coming and going on the wall, as on 12/08 when the thumbnails show the sun on the rock around the target. The other targets remain measured and their curves show nothing of their own. The structure does not move: nothing to do, CTR01's curve is missing every sunny afternoon.", "review": "2026-11-17"}
|
|
{"start": "2026-08-16T06:30Z", "end": "2026-08-17T07:30Z", "family": "Thermal displacement", "description": "Thermal cycle of the camera, poorly compensated. In the morning, when the housing heats up, the camera turns gradually (tilt rising, pan dropping, scale changing); the raw positions of all the targets and references move together. The compensation does not erase everything: the corr_x of PR16 and PR18 drops a little, the corr_y of PR18 hardly moves, then the curves come back in the afternoon; the camera then comes back slowly, in the evening and all night (the pan rises again), until the start of the next morning. Deduced cause: the pose follows the housing temperature, and the rock face of the quarry cannot move with the temperature. This is not a movement of the structure: nothing to do.", "review": "2026-11-17"}
|
|
{"start": "2026-08-16T09:15Z", "end": "2026-08-16T09:45Z", "family": "Visibility", "description": "CTR01 (local reference, treated as a target) is rejected for one measurement in the morning: its curve is missing. On the 09:30 thumbnail, the scene is dark (overcast sky) and the spot of CTR01, already weak, is barely visible, without any obstacle; the other targets remain measured. Cause not established: perhaps the lack of light on this weak target. Points to ignore, nothing to do.", "review": "2026-11-17"}
|
|
{"start": "2026-08-16T13:00Z", "end": "2026-08-16T17:00Z", "family": "Visibility", "description": "CTR01 (local reference, treated as a target) is rejected at times in the afternoon: its corr_x and corr_y curves are missing. Seen on the 14:00 thumbnail: the rock around the target is in full sun, as bright as the spot, which drowns in it. The other targets remain measured. The structure does not move: nothing to do, CTR01's curve is missing on sunny afternoons.", "review": "2026-11-17"}
|
|
{"start": "2026-08-17T02:30Z", "end": "2026-08-17T10:30Z", "family": "Visibility", "description": "End of night and overcast morning: PR07 is rejected at times from the end of the night, then at dawn CTR01 and PR09 are rejected almost all morning, PR07 and PR01 at times; their curves are missing. At dawn, several targets (PR05, PR06, PR08, PR16) make small jumps on corr_x. On the images, the end of the night is dark and very noisy (04:30), then the sky stays overcast and the spots are weak (07:00, 09:30), without any obstacle. Cause not established (perhaps the lack of light on the weakest targets). The structure does not move: do not trust the curves of these targets over the range, nothing to do.", "review": "2026-11-17"}
|
|
{"start": "2026-08-17T07:30Z", "end": "2026-08-18T08:15Z", "family": "Thermal displacement", "description": "Thermal cycle of the camera, poorly compensated. In the morning, when the housing heats up, the camera turns gradually (tilt rising, pan dropping, scale changing); the raw positions of all the targets and references move together. The compensation does not erase everything: the corr_x of PR18 drops a little, the corr_y of PR18 hardly moves, then the curves come back in the afternoon; the camera then comes back slowly, in the evening and all night (the pan rises again), until the start of the next morning. The morning is overcast (07:00 and 09:30 images): the pose starts slowly. Deduced cause: the pose follows the housing temperature, and the rock face of the quarry cannot move with the temperature. This is not a movement of the structure: nothing to do.", "review": "2026-11-17"}
|
|
{"start": "2026-08-17T13:30Z", "end": "2026-08-17T15:30Z", "family": "Visibility", "description": "CTR01 (local reference, treated as a target) is rejected at times in the afternoon: its corr_x and corr_y curves are missing. Deduced cause: same hour and same signature as the other sunny afternoons, where the thumbnails show the rock in full sun around the target and the spot drowning in it (16/08, 21 and 22/09). The other targets remain measured. The structure does not move: nothing to do, CTR01's curve is missing on sunny afternoons.", "review": "2026-11-17"}
|
|
{"start": "2026-08-18T06:15Z", "end": "2026-08-18T12:15Z", "family": "Visibility", "description": "Morning of poor visibility: CTR01 is rejected all morning, PR07 and PR09 at times, PR14, PR15, PR16 for one or two measurements; the corrected curves of PR16 above all, and of PR15, PR14, PR13, PR08, jump from one measurement to the next. On the 07:45 and 09:45 images, the light is uneven (sun on part of the wall, the rest in shadow) and the spots are weak, without visible obstacle. Cause not established (perhaps the morning light, uneven on the wall). The structure does not move: do not trust the curves over the range.", "review": "2026-11-17"}
|
|
{"start": "2026-08-18T08:15Z", "end": "2026-08-19T07:15Z", "family": "Thermal displacement", "description": "Thermal cycle of the camera, poorly compensated. In the morning, when the housing warms up little, the camera turns gradually (tilt rising, pan dropping, scale changing); the raw positions of all the targets and references move together. The compensation does not erase everything: the corr_x of PR18 drops markedly, the corr_y of PR18 hardly moves, then the curves come back in the afternoon; the camera then comes back slowly, in the evening and all night (the pan rises again), until the start of the next morning. Weak day, the housing warms up little: the pose hardly moves and neither does the dip of the corrected curves. At night, the compensation runs for a few hours without the reference CTR03, hidden by the cobweb (labelled separately). Deduced cause: the pose follows the housing temperature, and the rock face of the quarry cannot move with the temperature. This is not a movement of the structure: nothing to do.", "review": "2026-11-17"}
|
|
{"start": "2026-08-18T15:15Z", "end": "2026-08-18T16:45Z", "family": "Visibility", "description": "In mid-afternoon, PR07, PR09 and PR11 are rejected for one or two measurements, CTR01 once, and PR13, PR14, PR16 jump on corr_x or corr_y; nothing clear on the 16:00 image (wall in shadow, weak spots). Cause not established, a passing disturbance of the view. The structure does not move: points to ignore.", "review": "2026-11-17"}
|
|
{"start": "2026-08-18T17:30Z", "end": "2026-08-19T04:00Z", "family": "Visibility", "description": "A spider weaves its cobweb in front of the lens in early evening: on the images, the cobweb shows as wide blurred bands lit by the infrared (19:00, 21:00, 23:30, 03:00), absent the next day in daylight (10:00). All night, CTR01 is rejected, PR01, PR09, PR02 and PR03 at times: their curves are missing, and PR01 and CTR01 jump a little on corr_y between the rejections. The spider's passage and the hidden reference CTR03 are labelled separately. The structure does not move: do not trust the curves over the range, nothing to do.", "review": "2026-11-17"}
|
|
{"start": "2026-08-18T17:45Z", "end": "2026-08-18T18:15Z", "family": "Obstruction", "description": "The spider itself passes in front of the lens at 18:00: its lit body makes a large, blurred white spot in the middle of the image (18:00 image). The reference CTR02 is rejected for the time of this measurement and the compensation runs without it: all the targets jump together on corr_y; the corrections of the remaining references CTR03 and CTR04 fall to zero, as the expert reads it on 04/09, then everything comes back at the next measurement. Point to ignore, this is not a movement.", "review": "2026-11-17"}
|
|
{"start": "2026-08-18T22:15Z", "end": "2026-08-19T01:45Z", "family": "Obstruction", "description": "A strip of the cobweb settles on the reference CTR03 (22:30 and 01:00 images, where the lit strip covers it; at 01:15 it has moved away). CTR03 is rejected for several hours and the compensation runs without it: the basis changes, all the targets and the references CTR02 and CTR04 shift at once, mainly on corr_y, and stay on this plateau as long as CTR03 is missing; the raw positions have no step. When CTR03 returns, the curves come back, with a small rebound at the first measurement. The jumps are not a movement: do not trust the curves over the range.", "review": "2026-11-17"}
|
|
{"start": "2026-08-19T01:15Z", "end": "2026-08-19T01:45Z", "family": "No data", "description": "One measurement is missing for all the sensors, at night: all the curves have a gap. The image of that instant is missing too, but the station synchronised at that instant (last_sync) and its voltage is normal. No other station has data on that date to compare; cause not established. A gap of one or two measurements comes back around the same hour on many nights of the range. The curves resume at the next measurement: nothing to do.", "review": "2026-11-17"}
|
|
{"start": "2026-08-19T06:45Z", "end": "2026-08-19T12:15Z", "family": "Visibility", "description": "CTR01 (local reference, treated as a target) is rejected at times all morning: its curve is missing. On the 07:00 and 10:30 thumbnails, the scene is dark (overcast sky) and the spot of CTR01, already weak, is barely visible, without any obstacle; the other targets remain measured. Cause not established: perhaps the lack of light on this weak target. Points to ignore, nothing to do.", "review": "2026-11-17"}
|
|
{"start": "2026-08-19T07:15Z", "end": "2026-08-20T03:45Z", "family": "Thermal displacement", "description": "Thermal cycle of the camera, poorly compensated. In the morning, when the housing warms up little, the camera turns gradually (tilt rising, pan dropping, scale changing); the raw positions of all the targets and references move together. The compensation does not erase everything: the corr_x of PR16 drops a little, the corr_y of PR18 hardly moves, then the curves come back in the afternoon; the camera then comes back slowly, in the evening, then only very little at night, until the start of the next morning. The measurements are missing in the afternoon and a few times at night (gaps labelled separately): the return is only partly seen, under the cobweb of the night (labelled separately). Deduced cause: the pose follows the housing temperature, and the rock face of the quarry cannot move with the temperature. This is not a movement of the structure: nothing to do.", "review": "2026-11-17"}
|
|
{"start": "2026-08-19T14:15Z", "end": "2026-08-19T20:15Z", "family": "No data", "description": "No measurement or image for several hours in the afternoon, and the system metrics (voltage, synchronisations, temperatures) are also missing: all the curves are missing. The voltage is normal before and after. According to the data documentation, FLORIDA, MISSISSIPPI and VERMONT have a gap on the same day at the same hour (their data for this date are not in the folder): a common cause outside the station (transmission or reception of the data), not a station failure; it is not established. The curves resume without any offset of their own: nothing to do on the station.", "review": "2026-11-17"}
|
|
{"start": "2026-08-19T20:15Z", "end": "2026-08-20T03:45Z", "family": "Visibility", "description": "Cobweb night: on the 22:00 and 02:00 images, very noisy, a lit blurred band crosses the top of the group of targets and blurred discs are at the bottom left. CTR01 is rejected all night, PR07 for a few measurements; the corr_x of PR07 jumps at the start of the night and that of PR08 departs in the second half of the night. The range is cut by measurement gaps (labelled separately). The structure does not move: do not trust these curves over the range.", "review": "2026-11-17"}
|
|
{"start": "2026-08-19T20:30Z", "end": "2026-08-19T21:00Z", "family": "No data", "description": "One measurement is missing for all the sensors, just after the resumption from the afternoon gap: all the curves have a gap. The image is missing too, but the station synchronised at that instant (last_sync) and its voltage is normal. No other station has data on that date to compare; cause not established. The curves resume at the next measurement: nothing to do.", "review": "2026-11-17"}
|
|
{"start": "2026-08-20T00:30Z", "end": "2026-08-20T01:00Z", "family": "No data", "description": "One measurement is missing for all the sensors, at night: all the curves have a gap. The image of that instant is missing too, but the station synchronised at that instant (last_sync) and its voltage is normal. No other station has data on that date to compare; cause not established. A gap of one or two measurements comes back around the same hour on many nights of the range. The curves resume at the next measurement: nothing to do.", "review": "2026-11-17"}
|
|
{"start": "2026-08-20T03:45Z", "end": "2026-08-20T06:15Z", "family": "No data", "description": "No measurement at the end of the night, for a few hours: all the curves are missing from 04:00 to 06:00. The images and the system metrics are missing too from 04:00; the voltage is normal before and after. The image and a synchronisation (last_sync) come back at 06:00, one acquisition before the first measurement (06:15): at that instant the station is running and only the measurement is missing. No other station has data on that date to compare; cause not established. The curves resume without any offset of their own (the pose started with the morning, in the thermal cycle labelled separately): nothing to do."}
|
|
{"start": "2026-08-20T06:15Z", "end": "2026-08-21T05:15Z", "family": "Thermal displacement", "description": "Thermal cycle of the camera, poorly compensated. The start of the morning falls in a measurement gap (labelled separately): when measurements resume, the pose has already moved (tilt up, pan down). The raw positions of all the targets and references move together; the compensation does not erase everything, the corr_x of PR18 and PR16 drops a little, then comes back in the afternoon; the camera then comes back slowly, in the evening and all night (the pan rises, the corr_x of PR18 too), until the start of the next morning. Deduced cause: the pose follows the housing temperature, and the rock face of the quarry cannot move with the temperature. This is not a movement of the structure: nothing to do.", "review": "2026-11-17"}
|
|
{"start": "2026-08-20T08:00Z", "end": "2026-08-20T09:00Z", "family": "No data", "description": "Three measurements in a row are missing for all the sensors in the morning, the images too, with no synchronisation at those instants; the hourly metrics are there and the voltage is normal. No other station has data on that date to compare; cause not established. The curves then resume: nothing to do.", "review": "2026-11-17"}
|
|
{"start": "2026-08-20T14:15Z", "end": "2026-08-20T14:45Z", "family": "Visibility", "description": "CTR01 (local reference, treated as a target) is rejected for one measurement in the afternoon: its corr_x and corr_y curves are missing. Seen on the 14:30 thumbnail: the rock around the target is in full sun, as bright as the spot, which drowns in it. The other targets remain measured. The structure does not move: nothing to do, CTR01's curve is missing on sunny afternoons.", "review": "2026-11-17"}
|
|
{"start": "2026-08-20T16:15Z", "end": "2026-08-20T17:15Z", "family": "Visibility", "description": "The sun reaches the wall in late afternoon (16:15, 16:30, 16:45 thumbnails): PR07 disappears and is rejected for one measurement, the corr_x of PR14, PR15 and PR16 jumps for the time of this measurement, PR05 and PR08 a little at the next, then everything comes back. Points to ignore, nothing to do.", "review": "2026-11-17"}
|
|
{"start": "2026-08-21T00:30Z", "end": "2026-08-21T01:15Z", "family": "No data", "description": "Two measurements in a row are missing for all the sensors, at night: all the curves have a gap, the images are missing too; the station synchronised at the start of the gap (last_sync) and its voltage is normal. No other station has data on that date to compare; cause not established. A gap of one or two measurements comes back around the same hour on many nights of the range. The curves then resume: nothing to do.", "review": "2026-11-17"}
|
|
{"start": "2026-08-21T05:15Z", "end": "2026-08-22T06:00Z", "family": "Thermal displacement", "description": "Thermal cycle of the camera, poorly compensated. In the morning, when the housing heats up, the camera turns all at once (tilt rising, pan dropping, scale changing); the raw positions of all the targets and references move together. The compensation does not erase everything: the corr_x of PR18 drops markedly, the corr_y of PR18 rises, then the curves come back in the afternoon; the camera then comes back slowly, in the evening, then only very little at night, until the start of the next morning. In the evening and at night, the cobweb (labelled separately) makes its own jumps. Deduced cause: the pose follows the housing temperature, and the rock face of the quarry cannot move with the temperature. This is not a movement of the structure: nothing to do.", "review": "2026-11-17"}
|
|
{"start": "2026-08-21T12:15Z", "end": "2026-08-21T13:30Z", "family": "Visibility", "description": "CTR01 (local reference, treated as a target) is rejected twice in early afternoon: its curve is missing. On the 12:30 thumbnail, the scene is dark (overcast sky) and the spot of CTR01, already weak, is barely visible, without any obstacle; the other targets remain measured. Cause not established: perhaps the lack of light on this weak target. Points to ignore, nothing to do.", "review": "2026-11-17"}
|
|
{"start": "2026-08-21T15:45Z", "end": "2026-08-22T07:30Z", "family": "Visibility", "description": "A cobweb settles in front of the lens in late afternoon: blurred bands are already visible by day (16:45 image), then at night as wide lit bands covering a large part of the scene (18:15, 19:15, 20:30, 03:00); the image becomes sharp again in the morning (07:30). PR07 is rejected from 16:00, CTR01 all night; at dusk, most of the targets are rejected at the same time and the corrected curves of the others jump in both directions; PR08 stays offset on corr_x until the morning. The structure does not move: do not trust the curves over the range, nothing to do.", "review": "2026-11-17"}
|
|
{"start": "2026-08-22T06:00Z", "end": "2026-08-23T05:15Z", "family": "Thermal displacement", "description": "Thermal cycle of the camera, poorly compensated. In the morning, when the housing heats up, the camera turns all at once (tilt rising, pan dropping, scale changing); the raw positions of all the targets and references move together. The compensation does not erase everything: the corr_x of PR18, PR14, PR16 and PR15 drops markedly, the corr_y of PR18 rises, then the curves come back in the afternoon; the camera then comes back slowly, in the evening and all night (the pan rises again), until the start of the next morning. The following night is the coldest of the batch: as the housing temperature keeps falling, the camera keeps turning (scale dropping, rotation and pan rising), the registration error rises, and the reference CTR04 slides a little downward against the targets while CTR02 slides the other way; through the compensation, the corr_y of most targets rises a little and stays up from midnight to the end of the night (PR15, PR07, PR10, PR06, PR14, PR16 above all, and the reference CTR02, while CTR03 goes down), then comes back as the housing warms up in the next morning. The targets do not move relative to each other, their error_value stays at its level, and the reference thumbnails show sharp spots, although lit cobweb threads cross the image all night (20:00 and 03:00 images). Deduced cause: the pose follows the housing temperature, and the rock face of the quarry cannot move with the temperature. This is not a movement of the structure: nothing to do."}
|
|
{"start": "2026-08-22T16:30Z", "end": "2026-08-22T17:00Z", "family": "No data", "description": "One measurement is missing for all the sensors in late afternoon; the image of that instant exists. The system metrics are missing for several hours from that hour, then the entries waiting to be sent (DB_not_uploaded) accumulate until the next morning before being sent: the station is running, the sending of its data is hindered. According to the data documentation, FLORIDA and MISSISSIPPI also have a gap on the same day around the same hour (their data for this date are not in the folder): a common cause outside the station (transmission or reception of the data), not a station failure; it is not established. The curves resume at the next measurement: nothing to do on the station.", "review": "2026-11-17"}
|