Files
aimsight-labeling/auto/analyses/LENZSPITZE_2026-11-01T1030_2026-11-01T1140/report.md
T

7.2 KiB

LENZSPITZE: a train at 11:00, then a reference that brightens

You selected 01.11 from 10:30 to 11:40 UTC with this question: "Around 11:00, the track targets move a little; a train?" Yes, a train passes at 11:00, seen on the image. But what the curves keep afterwards, from 11:15, has another cause: the distant reference 8012 changes brightness and the base of the compensation moves with it. All this happens in the middle of the camera's thermal cycle, on a sunny day.

What the data show

There is no rejection, no missing measurement, and the 9 references stay retained over the whole range; the camera is re-registered at each measurement (inventory.py --start … --end …).

1. 10:55 → 11:05: a train passes (confirmed).

  • What is seen. On the image of 11:00, a train passes on the track to the left of the instrumented track, in transparency, with motion blur. It covers 8003, 8010 and the reference 8004, and passes at the bottom of the distant references 8011 to 8013.
  • Duration. The images, taken once an hour, do not give it: the train is only on that of 11:00 (absent at 10:01 and at 12:01), moving during the capture; it is the measurements that bound it: it touches those of 11:00 and 11:01, not those of 10:55 or 11:05: it stayed in front of the targets at least one minute, and less than ten (a long train, or two passages).
  • Image quality. At the measurements of 11:00 and 11:01, the image of almost all sensors, references included, becomes less sharp, and a second pattern shows in it. The light remains whole, except on 1006, partly hidden: the train was in front of the targets only part of the capture (quality.py --table sharpness|dominance|flux --step 1min).
  • What does not move. The references 8014 and 8017, to the right of the field, and the near targets 1021 to 1024 are barely touched.
  • Error and curves. The error_value of 35 sensors out of 41 rises, without any rejection (overview.py --min 1). The curves make a small jump for the time of these two measurements: the corr_y of 1022 mostly, then 202H, 1009, 1013 and 1001, and the corr_x of 101B, 1012, 1013, 1008 and of the reference 8019. Everything comes back at 11:05 (ranges.py --rolling 3 --instants, summary.py --step 1min).

2. 10:30 → 11:40 (and beyond): the camera moves with the heat (strongly supported).

  • Temperature. The housing temperature rises clearly from 11:00 and peaks in the early afternoon (metrics.py).
  • Camera pose. The tilt drops at once at 11:05, the pan at 11:15, then the rotation rises. All targets and references move together in the image (overview.py, --rigid).
  • Curves. The corr_y of many targets (1020, 1019, 1018, 1016, 1008…), dipped since the morning warming, rises from 11:00 and regains its night level around 13:00 (summary.py --step 30min, from 03:00 to 16:00). Part of the "movement" seen around 11:00 is therefore this return, not the train: it starts at the same instant, but it lasts.
  • Same days. The same cycle returns every sunny day on this station.

3. 11:05 → 11:40: the reference 8012 brightens and slightly distorts the base (consistent with the sun on this reference).

  • The reference. At 11:15, the spot of 8012 suddenly becomes brighter (about one and a half times) and sharper. Its position in the image shifts by about a third of a pixel against the other references, which stay under a tenth of a pixel (capteur_jours.py, overview.py --rigid 2026-11-01T10:30Z).
  • The base. The registration error (sigma0) doubles and stays high.
  • The curves. The corr_x of the targets makes a step depending on their place in the image: 8003, 1011, 1001, 1003, 1006, 1021, 201B, 7013H drop; 8010, 1017, 1002 rise. The step holds until the end of the range.
  • The other days. The same brightening of 8012 returns around the same hour on 22.10, 27.10 and 02.11, sunny days, but not on 03.11, also sunny.

4. 11:20: the image shakes for one measurement (possible: turbulence; a partial passage is not excluded).

  • Image quality. The image loses sharpness on the same sensors as at 11:00, without loss of light.
  • Pose and curves. The pose makes a round trip and a few targets make a small jump (7013H, 1024, 102H, 1010, 1017, the reference 92H), which comes back at 11:25. The same nuisance returns weaker at 11:30, without effect on the curves.

Corrected curves from 10:00 to 12:30; grey zone: the passage of the train In the grey zone, 1022 and 202H make a one-measurement jump in corr_y and come back. Just after, 1020 and 1018 rise and stay (the thermal return). At 11:15, 8012 (yellow) leaps in corr_x, and 8003, 1011 drop while 8010 and 1017 rise: this is the step of the base.

The camera image at 11:00 A train is seen to the left of the instrumented track, in transparency and blurred, under full sun.

Track-target zone at 10:01, 11:00 and 12:01 At 11:00, the train passes in front of 8003, 8004 and the group 1002, 1004, 1006. It is neither at 10:01 nor at 12:01.

Image quality from 10:00 to 12:30 (relative to calm days; colored ranges: the labels) The sharpness drops and the dominance leaps at 11:00, while the flux stays whole: the train does not hide the spots, it blurs them. The weaker dips of 11:20, 11:30 and 11:45 are also visible.

Camera pose and raw positions over the range The pan drops and sigma0 rises at 11:15; on the x panel, the reference 8012 (purple) stands out from the others.

What remains not established

  • Why 8012 brightens. The sun on the reference or on its background is likely: the hour repeats from one sunny day to the next. But 03.11, sunny, does not show it, and no image exists between 11:00 and 12:01.
  • What the step of 11:15 distorts. The step of the corr_x mixes two things: the base distorted by 8012, and a small own shift of 8003, 8010 and 1017 in the image. I did not separate them (the compensation would have to be redone without 8012).
  • The cause of 11:20. Turbulence above the sunlit track or partial passage of a train: the image quality does not tell them apart, and no image is taken at that instant.
  • The camera steps. The steps of the tilt (11:05) and of the pan (11:15) are more abrupt than an ordinary cycle. I read them as the thermal cycle, because they return in the afternoon; a link with the train is not demonstrated.

Labels

No existing label covered this range. I propose four:

  • 2026-11-01T10:30Z → 11:40Z Thermal displacement: the camera moves with the warming of the housing, in the sun; the corr_y of many targets comes back from its morning dip.
  • 2026-11-01T10:55Z → 11:05Z Obstruction: a train seen on the image of 11:00. Images blurred without loss of light (except 1006), small jumps of one or two measurements, return at 11:05.
  • 2026-11-01T11:05Z → 11:40Z Visibility: the reference 8012 brightens and shifts, and the base of the compensation is distorted by it. The corr_x of the targets makes a step; probable cause the sun, not established.
  • 2026-11-01T11:15Z → 11:25Z Visibility: at 11:20, the image shakes for one measurement, with small jumps that come back. Probable turbulence, partial passage not excluded.