Files
aimsight-labeling/auto/analyses/NORDEND_2026-11-05T0600_2026-11-05T1200/tools.md
T

2.6 KiB

Tools: NORDEND_2026-11-05T0600_2026-11-05T1200

Tools modified: none data.py: unchanged

What the analyst used

  • inventory.py on the range: references kept at each instant, rejections of CTR01 and PR09.
  • overview.py --min 1 (widened window from 04:00 to 14:00), then --rigid 2026-11-05T06:00Z --follow … --residuals no: the pose and the table by step dated the jolt of 12:00 (rotation, tilt, raw positions); the residual PNGs showed the drift of the right edge.
  • ranges.py --columns corr_x,corr_y --rolling 4 --instants 3: under the thermal drift, it returned only two instants (09:45 with 3 sensors, 12:00 with 8), with the state of the references. It is the command that grounds the label.
  • summary.py --step 15min --level window --mark (corr_y, error_value), metrics.py, plot.py --zone, thumbnails.py --radius 40, the whole image of 12:00.
  • The folder has no scripts/: the analyst wrote no script. Its "Difficulties" mention only Ollama (labeling/precedents.py), which does not depend on this repository. Its "Documentation" section talks about the labeling rules, not about reading.
  • What was cluttering, slightly: a | tail -22 on summary.py and a | head -20 on metrics.py, to cut an output. --start/--end and the pipe to grep described in the guide already do it.

What I decided

  • All the tools used: left as they are. They showed what the analyst had to see: the one-measurement jolt under the drift (ranges.py --rolling --instants), the pose and the references (overview.py, --rigid). Nothing was missing for it.
  • summary.py, metrics.py: left as they are. The head/tail were the analyst's choice, not a lack of the tool. The Conventions of the guide already say how to shorten an output.
  • No script to bring in: scripts/ does not exist.

What changed

none

Trial

No tool changed, so there was nothing new to try. I nevertheless reran, from tools/scripts/, the tools the report cites: the analysis ran just before commit 67c8862, which moved the tools into scripts/. The figures are stored in work/: common, multiples-error_value, residuals-corr_x/corr_y/error_value, rigid, metrics.

Report commands rerun

5, with the tools/scripts/ paths (overview.py --min 1, metrics.py, ranges.py --rolling 4 --instants 3, overview.py --rigid 2026-11-05T06:00Z, inventory.py): no failure. ranges.py returns the same two instants (09:45: 3 sensors; 12:00: 8 sensors) as those cited by the analyst.

Difficulties

  • The log cites the tools at their old path (tools/inventaire.py, tools/ensemble.py …). The report names them without a path. I reran with tools/scripts/, like the current guide.