Files
aimsight-labeling/auto/analyses/NORDEND_2026-09-17T0545_2026-09-30T0415/labels.jsonl
T

17 lines
13 KiB
JSON

{"start": "2026-09-17T05:45Z", "end": "2026-09-18T06:30Z", "family": "Thermal displacement", "description": "Thermal cycle of the camera, poorly compensated. In the morning, when the housing heats up, the camera turns gradually (tilt rising, pan dropping, scale changing); the raw positions of all the targets and references move together. The compensation does not erase everything: the corr_x of PR18, PR16 and PR15 drops a little, the corr_y of PR18 hardly moves, then the curves come back in the afternoon; the camera then comes back slowly, in the evening, then only very little at night, until the start of the next morning. Deduced cause: the pose follows the housing temperature, and the rock face of the quarry cannot move with the temperature. This is not a movement of the structure: nothing to do.", "review": "2026-11-17"}
{"start": "2026-09-17T14:30Z", "end": "2026-09-17T15:00Z", "family": "Visibility", "description": "CTR01 (local reference, treated as a target) makes a clear corr_x jump for one measurement in the afternoon and comes back at the next, without being rejected: its error_value rises just under the threshold for that measurement alone, so its point stays on the curve, wrong; its corr_y does not move. Seen on the thumbnail of 14:45: the rock around the target is in full sun, as bright as the spot, which drowns in it; at 14:00 the rock is less lit and at 15:15 it is in shade, the spot sharp. Same hour and same cause as the other sunny afternoons, where CTR01 is rejected instead and its curve is only missing. The other targets show nothing. The structure does not move: ignore this point of CTR01.", "review": "2026-11-18"}
{"start": "2026-09-17T20:00Z", "end": "2026-09-17T22:45Z", "family": "Obstruction", "description": "At night, PR07 is rejected at times (its curve is missing) and makes one-measurement jumps; PR14, PR15 and PR16 also depart for one or two measurements. A cobweb lit by the infrared crosses the field of the targets (23:00 image), the spot of PR07 is tiny on the 22:00 one. Deduced cause: the cobweb seen on the field of the targets. The structure does not move: ignore these points.", "review": "2026-11-17"}
{"start": "2026-09-18T06:30Z", "end": "2026-09-19T06:15Z", "family": "Thermal displacement", "description": "Thermal cycle of the camera, poorly compensated. In the morning, when the housing heats up, the camera turns gradually (tilt rising, pan dropping, scale changing); the raw positions of all the targets and references move together. The compensation does not erase everything: the corr_x of PR18, PR16, PR15 and PR14 drops markedly, the corr_y of PR18 rises, then the curves come back in the afternoon; the camera then comes back slowly, in the evening, then only very little at night, until the start of the next morning. Deduced cause: the pose follows the housing temperature, and the rock face of the quarry cannot move with the temperature. This is not a movement of the structure: nothing to do.", "review": "2026-11-17"}
{"start": "2026-09-19T06:15Z", "end": "2026-09-20T07:30Z", "family": "Thermal displacement", "description": "Thermal cycle of the camera, poorly compensated. In the morning, when the housing heats up, the camera turns gradually (tilt rising, pan dropping, scale changing); the raw positions of all the targets and references move together. The compensation does not erase everything: the corr_x of PR18 and PR16 drops a little, the corr_y of PR18 rises, then the curves come back in the afternoon; the camera then comes back slowly, in the evening, then only very little at night, until the start of the next morning. Deduced cause: the pose follows the housing temperature, and the rock face of the quarry cannot move with the temperature. This is not a movement of the structure: nothing to do.", "review": "2026-11-17"}
{"start": "2026-09-20T07:30Z", "end": "2026-09-21T06:00Z", "family": "Thermal displacement", "description": "Weak thermal cycle of the camera: the housing warms up little and the camera slides slowly, without a jump in the morning (tilt rising a little, pan dropping). The drop in visibility of the morning, where the reference CTR04 is discarded and the whole basis jumps (labelled separately), is mixed in. Afterwards the corrected curves hardly depart; in the evening and at night, the camera comes back slowly, the corr_x of PR14 to PR18 going a little above its night level, until the start of the next morning. Deduced cause: the pose follows the housing temperature, and the rock face of the quarry cannot move with the temperature. This is not a movement of the structure: nothing to do.", "review": "2026-11-17"}
{"start": "2026-09-20T08:45Z", "end": "2026-09-20T12:00Z", "family": "Visibility", "description": "Visibility drops over the whole scene in late morning: on the images from 09:15 to 10:30, the spot of the reference CTR04 and those of many targets almost fade out, without any obstacle in front of them; a pale band (cobweb thread in the sun) crosses the image. CTR04 exceeds its threshold and is discarded: the compensation runs on two references (reprojection at zero), the basis changes and the corrections of all the targets jump together (PR08, PR06, PR05, PR16, PR14, PR13 the most), with a one-measurement return when CTR04 comes back, then everything comes back when it reappears; most of the targets are rejected at times. Cause of the drop not established. This is not a movement: data not to be trusted over the range.", "review": "2026-11-17"}
{"start": "2026-09-21T06:00Z", "end": "2026-09-22T06:30Z", "family": "Thermal displacement", "description": "Thermal cycle of the camera, poorly compensated. In the morning, when the housing heats up strongly, the camera turns gradually (tilt rising, pan dropping, scale changing); the raw positions of all the targets and references move together. The compensation does not erase everything: the corr_x of PR18, PR16, PR15 and PR14 drops strongly, the corr_y of PR18 rises, then the curves come back in the afternoon; the camera then comes back slowly, in the evening and all night (the pan rises again), until the start of the next morning. Deduced cause: the pose follows the housing temperature, and the rock face of the quarry cannot move with the temperature. This is not a movement of the structure: nothing to do.", "review": "2026-11-17"}
{"start": "2026-09-22T06:30Z", "end": "2026-09-23T06:00Z", "family": "Thermal displacement", "description": "Thermal cycle of the camera, poorly compensated. In the morning, when the housing heats up strongly, the camera turns all at once (tilt rising, pan dropping, scale changing); the raw positions of all the targets and references move together. The compensation does not erase everything: the corr_x of PR18, PR16, PR15 and PR14 drops strongly, the corr_y of PR18 rises, then the curves come back in the afternoon; the camera then comes back slowly, in the evening and all night (the pan rises again), until the start of the next morning. Deduced cause: the pose follows the housing temperature, and the rock face of the quarry cannot move with the temperature. This is not a movement of the structure: nothing to do.", "review": "2026-11-17"}
{"start": "2026-09-23T06:00Z", "end": "2026-09-24T07:00Z", "family": "Thermal displacement", "description": "Thermal cycle of the camera, poorly compensated. In the morning, when the housing heats up strongly, the camera turns all at once (tilt rising, pan dropping, scale changing); the raw positions of all the targets and references move together. The compensation does not erase everything: the corr_x of PR18, PR16, PR15 and PR14 drops strongly, the corr_y of PR18 rises, then the curves come back in the afternoon; the camera then comes back slowly, in the evening and all night (the pan rises again), until the start of the next morning. Deduced cause: the pose follows the housing temperature, and the rock face of the quarry cannot move with the temperature. This is not a movement of the structure: nothing to do.", "review": "2026-11-17"}
{"start": "2026-09-24T07:00Z", "end": "2026-09-25T06:00Z", "family": "Thermal displacement", "description": "Thermal cycle of the camera, poorly compensated. In the morning, when the housing warms up little, the camera turns gradually (tilt rising, pan dropping, scale changing); the raw positions of all the targets and references move together. The compensation does not erase everything: the corr_x of PR18 drops a little, the corr_y of PR18 hardly moves, then the curves come back in the afternoon; the camera then comes back slowly, in the evening and all night (the pan rises again), until the start of the next morning. Deduced cause: the pose follows the housing temperature, and the rock face of the quarry cannot move with the temperature. This is not a movement of the structure: nothing to do.", "review": "2026-11-17"}
{"start": "2026-09-25T06:00Z", "end": "2026-09-26T06:00Z", "family": "Thermal displacement", "description": "Thermal cycle of the camera, poorly compensated. In the morning, when the housing heats up strongly, the camera turns all at once (tilt rising, pan dropping, scale changing); the raw positions of all the targets and references move together. The compensation does not erase everything: the corr_x of PR18, PR16, PR15 and PR17 drops strongly, the corr_y of PR18 rises, then the curves come back in the afternoon; the camera then comes back slowly, in the evening, then only very little at night, until the start of the next morning. This is the night the expert describes: according to him, on this station, the pan and the tilt drift from nightfall and come back all at once in the morning. Deduced cause: the pose follows the housing temperature, and the rock face of the quarry cannot move with the temperature. This is not a movement of the structure: nothing to do.", "review": "2026-11-17"}
{"start": "2026-09-26T06:00Z", "end": "2026-09-27T06:30Z", "family": "Thermal displacement", "description": "Thermal cycle of the camera, poorly compensated. In the morning, when the housing heats up strongly, the camera turns all at once (tilt rising, pan dropping, scale changing); the raw positions of all the targets and references move together. The compensation does not erase everything: the corr_x of PR18, PR16, PR15 and PR14 drops markedly, the corr_y of PR18 rises, then the curves come back in the afternoon; the camera then comes back slowly, in the evening and all night (the pan rises again), until the start of the next morning. Deduced cause: the pose follows the housing temperature, and the rock face of the quarry cannot move with the temperature. This is not a movement of the structure: nothing to do.", "review": "2026-11-17"}
{"start": "2026-09-27T06:30Z", "end": "2026-09-28T05:45Z", "family": "Thermal displacement", "description": "Thermal cycle of the camera, poorly compensated. In the morning, when the housing heats up strongly, the camera turns gradually (tilt rising, pan dropping, scale changing); the raw positions of all the targets and references move together. The compensation does not erase everything: the corr_x of PR18, PR16, PR15 and PR14 drops strongly, the corr_y of PR18 rises, then the curves come back in the afternoon; the camera then comes back slowly, in the evening and all night (the pan rises again), until the start of the next morning. Deduced cause: the pose follows the housing temperature, and the rock face of the quarry cannot move with the temperature. This is not a movement of the structure: nothing to do.", "review": "2026-11-17"}
{"start": "2026-09-28T05:45Z", "end": "2026-09-29T06:30Z", "family": "Thermal displacement", "description": "Thermal cycle of the camera, poorly compensated. In the morning, when the housing heats up strongly, the camera turns gradually (tilt rising, pan dropping, scale changing); the raw positions of all the targets and references move together. The compensation does not erase everything: the corr_x of PR18, PR16, PR15 and PR14 drops strongly, the corr_y of PR18 rises, then the curves come back in the afternoon; the camera then comes back slowly, in the evening and all night (the pan rises again), until the start of the next morning. Deduced cause: the pose follows the housing temperature, and the rock face of the quarry cannot move with the temperature. This is not a movement of the structure: nothing to do.", "review": "2026-11-17"}
{"start": "2026-09-29T06:30Z", "end": "2026-09-30T04:15Z", "family": "Thermal displacement", "description": "Thermal cycle of the camera, poorly compensated. In the morning, when the housing heats up strongly, the camera turns gradually (tilt rising, pan dropping, scale changing); the raw positions of all the targets and references move together. The compensation does not erase everything: the corr_x of PR18, PR16, PR15 and PR14 drops markedly, the corr_y of PR18 rises, then the curves come back in the afternoon; the camera then comes back slowly, in the evening, then only very little at night, until the start of the next morning. Deduced cause: the pose follows the housing temperature, and the rock face of the quarry cannot move with the temperature. This is not a movement of the structure: nothing to do.", "review": "2026-11-17"}