65 lines
46 KiB
JSON
65 lines
46 KiB
JSON
{"start": "2026-09-24T02:30Z", "end": "2026-10-01T00:00Z", "family": "Obstruction", "description": "PB2_2 alone: at 02:45 on 24/09, its spot shrinks (02:30 and 02:45 thumbnails) and its corr_x makes a large jump to one side, its corr_y a smaller one to the other; it stays at that level all day. On 25/09 at 02:45, at the same hour, it comes back one step toward its neighbours on corr_x, but not all the way to its level from before, and its corr_y goes lower; at the same moment, the corr_y of its neighbour PB1_2 goes down one step (labelled separately); then corr_x of PB2_2 slides slowly downward until 29/09 and rises back over the day of 30/09, without returning to its level from before 24/09. All this time, its night error_value stays above its level from before and its spot stays smaller (23:00 thumbnails from 24/09 to 30/09, compared with 23/09), while those of PB1_2 and PB4 do not change. Cause partly seen: something covers the spot of PB2_2 (smaller spot), of a nature not seen on the images; the two steps fall at the same hour of the night as the disturbances of PB1_2 on 03/09, 08/09 and 01/10. The structure is not moving: do not trust the curve of PB2_2 over the range; look at what is in front of the target.", "review": "2026-11-17"}
|
|
{"start": "2026-09-24T04:00Z", "end": "2026-09-24T12:30Z", "family": "Thermal displacement", "description": "At sunrise, the camera nods down: its tilt rises, with its scale and its rotation, and all the raw positions, references included, move together in the image; the tilt peaks in early morning, goes below its night level in late morning, then comes back to it in early afternoon, while the housing temperature rises; the scale and the pan come back more slowly, until mid-afternoon. The compensation follows most of it, but not at the bottom of the image: the two targets closest to the camera, PB1_2 and PB2_2, keep part of the wave. The corr_y of PB2_2 (whose spot is partly covered, separate label) rises clearly from early morning to late morning, that of PB1_2 a little; the corr_x of PB1_2 dips at sunrise and in the morning, then comes back. Their raw positions move slightly away from the overall movement of the targets: a remainder of the camera movement that the compensation does not take at the nearest targets. The other targets keep nothing beyond the noise. Deduced cause: the mount or the lens of the camera heats up in the sun; according to the expert, the road hardly moves with temperature and the system compensates this movement well. Normal, nothing to do; the small morning wave of PB1_2 and PB2_2 is not a movement.", "review": "2026-11-18"}
|
|
{"start": "2026-09-24T04:45Z", "end": "2026-09-24T05:15Z", "family": "Visibility", "description": "At sunrise, the reference PA_8 is rejected for the time of one measurement, with its neighbour PA_9: on the 05:00 thumbnail, its spot is drowned in bright streaks, the low sun on the background behind it. Without PA_8 the basis changes: PA2_2, its neighbour, jumps on corr_x, the other targets barely. Everything comes back at the next measurement. Cause seen: the low sun lights the background behind PA_8, as on the other mornings. The structure is not moving: point to ignore.", "review": "2026-11-18"}
|
|
{"start": "2026-09-24T05:30Z", "end": "2026-09-24T06:00Z", "family": "Visibility", "description": "At sunrise, the shadow of a tree, long and moving with the low sun, covers PB2_2, PB3_2 and PB_5, with patches of sun through the foliage near PB2_2 (05:45 image, compared with those of 05:30 and 06:00): PB2_2, which stayed under the threshold, locks onto something other than its spot and its corr_x, corr_y make a very large jump for the time of one measurement; PA3_2 is rejected, PB4 and R2 too, as every morning at this hour. Everything comes back at the next measurement. Cause seen: the light of the low sun on the fixed scene, not a passing object. The structure is not moving: this point of PB2_2 is false, to ignore.", "review": "2026-11-17"}
|
|
{"start": "2026-09-24T09:00Z", "end": "2026-09-24T09:30Z", "family": "Obstruction", "description": "Vehicles pass in front of the targets, translucent trails on the 09:15 image: PA3_2, PB4 and PB1_2 are rejected, with the references R1, R2 and R3; PB_5, which stayed under the threshold, locks onto something other than its spot and its corr_x, corr_y make a very large jump, PB2_2 a small one. Everything comes back at the next measurement. The structure is not moving: this point of PB_5 is false, to ignore.", "review": "2026-11-17"}
|
|
{"start": "2026-09-25T02:30Z", "end": "2026-09-29T23:00Z", "family": "Displacement", "description": "PB1_2: after the shift at the restart, its corr_y goes down one step on 25/09 at 02:45, at the same moment as its neighbour PB2_2 rises back in part (labelled separately), then keeps going down slowly, night after night, until the evening of 29/09, and stabilises; with no return until the end of the batch. Its raw position goes down alone relative to the overall movement of the targets; PA_9 and PB4 move much less, and the pose of the camera at night barely moves. Its night error_value stays at its level until 28/09 and rises a little on 29/09; its spot stays sharp at night, a little less round on 29/09 (23:00 thumbnails from 23/09 to 29/09). The housing temperature follows the same cycle every day, with no lasting drop: it does not explain the descent. Cause not established (the target had already been disturbed in early September, at the same hour of the night). A movement of the kerb is not excluded: look at the target PB1_2, keep watching.", "review": "2026-11-17"}
|
|
{"start": "2026-09-25T04:15Z", "end": "2026-09-25T05:00Z", "family": "Visibility", "description": "At sunrise, the reference PA_8 and its neighbour PA_9 are rejected for two measurements: on the 04:30 thumbnail, the spot of PA_8 is drowned in the bright streaks of the low sun on the background. Without PA_8 the basis changes: PA2_2 jumps on corr_x, PB1_2 and PB_5 a little, then PB2_2 on corr_x and PA3_2 on corr_y. Everything comes back when PA_8 is taken again. Cause seen: the low sun lights the background behind PA_8, as on the other mornings. The structure is not moving: points to ignore.", "review": "2026-11-18"}
|
|
{"start": "2026-09-25T12:00Z", "end": "2026-09-25T12:30Z", "family": "Obstruction", "description": "A vehicle passes in front of the references R2 and R1, seen as translucent on the 12:15 image: R1 and R2 are rejected and the basis changes; PB4 especially, PB_5, PB2_2, PA3_2 and PB1_2 jump together on corr_x or corr_y for the time of one measurement. Everything comes back at the next measurement. The structure is not moving: point to ignore.", "review": "2026-11-17"}
|
|
{"start": "2026-09-26T03:45Z", "end": "2026-09-26T07:45Z", "family": "Obstruction", "description": "At sunrise, a line of cars parked along the pavement hides the reference PB3_2 and the targets PA2_2, PA3_2, PB2_2 and PB_5, seen on the images from 04:00 to 07:00; a last car stays in front of PA_9 until 07:15. These sensors have their error_value almost at 1 and are rejected almost throughout the range, PA_9 until 07:30. Without PB3_2, and with PA_8 and R2 rejected at sunrise, the compensation runs on few references, then on none at 05:15 (no recalibration): PB1_2 then makes a large jump, PB4 and PA1_2 smaller ones. Everything comes back at 07:45. The structure is not moving: ignore the curves of these targets over the range.", "review": "2026-11-17"}
|
|
{"start": "2026-09-27T04:15Z", "end": "2026-09-27T05:30Z", "family": "Visibility", "description": "At sunrise, the reference PA_8 is rejected for four measurements, PA_9 for three: on the 04:45 and 05:00 thumbnails, the spot of PA_8 is drowned in bright streaks of the low sun on the background, which fade by 05:30. Without PA_8 the basis changes: PA2_2 jumps on corr_x and corr_y, PA3_2 and PB_5 on corr_x. Everything comes back when PA_8 is taken again. Cause seen: the low sun lights the background behind PA_8, as on the other mornings. The structure is not moving: points to ignore.", "review": "2026-11-18"}
|
|
{"start": "2026-09-27T06:45Z", "end": "2026-09-27T07:15Z", "family": "Obstruction", "description": "Bright reflections line up on the central reservation near the reference R2 (07:00 image), the reflections of passing vehicles: R1, R2 and R3 are rejected, PB4 and PA3_2 too, and the basis changes; PB2_2 and PB_5 jump on corr_x and corr_y for the time of one measurement. Everything comes back at the next measurement. The structure is not moving: point to ignore.", "review": "2026-11-17"}
|
|
{"start": "2026-09-28T04:15Z", "end": "2026-09-28T05:15Z", "family": "Visibility", "description": "At sunrise, the reference PA_8 is rejected for two measurements and PA_9 until 05:15: the basis changes and PA2_2, PA3_2, PB1_2 and PB2_2 shift a little on corr_x, PA2_2 on corr_y; at 04:30, PB4, left under its threshold, jumps clearly on corr_x and corr_y for that measurement alone; at 05:00, with PA_8 back just under its threshold, PA2_2 jumps the other way on corr_y. Everything comes back at 05:15. Cause deduced from the signature of the other mornings: PA_8 drowned in the low sun on its background at the same hour (thumbnails of 24/09, 25/09 and 27/09). The structure is not moving: points to ignore.", "review": "2026-11-18"}
|
|
{"start": "2026-09-28T04:15Z", "end": "2026-09-28T12:30Z", "family": "Thermal displacement", "description": "At sunrise, the camera nods down: its tilt rises, with its scale and its rotation, and all the raw positions, references included, move together in the image; the tilt peaks in early morning, goes below its night level in late morning, then comes back to it in early afternoon, as every day, while the housing temperature rises; the scale and the pan come back more slowly, until mid-afternoon. The compensation follows: the corrected curves of the targets do not show this wave, only the daytime agitation (separate label), except PB1_2 and PB2_2, at the bottom of the image, whose corr_y rises at the height of the morning movement, following the overall movement, their raw position moving slightly away from it, then comes back in late morning: the compensation follows almost everything (according to the expert, the effect is well compensated); only a small deviation at the bottom of the image remains. Deduced cause: the mount or the lens of the camera heats up in the sun; according to the expert, the road hardly moves with temperature and the system compensates this movement well. Normal, nothing to do.", "review": "2026-11-17"}
|
|
{"start": "2026-09-28T05:15Z", "end": "2026-09-28T05:45Z", "family": "Obstruction", "description": "At sunrise, R1 and R2 are rejected together for the time of one measurement and the basis changes: PB_5 especially, PB1_2, PB2_2 and PA3_2 jump on corr_x and corr_y. On the 05:30 image, translucent cars at the top of the scene and a blurry dark shape at the bottom; deduced cause: the signature of the passages seen from the station (R1 and R2, on the same lane, lost together, back at the next measurement). PB4 and R2 are rejected before and after, as every morning. The structure is not moving: point to ignore.", "review": "2026-11-17"}
|
|
{"start": "2026-09-29T02:30Z", "end": "2026-09-29T05:15Z", "family": "No data", "description": "No measurement for any sensor at the end of the night, until sunrise. The station shuts down for lack of energy: just before the outage, the battery is at its lowest and the voltage below its usual night level, and the metrics stop with the measurements; it restarts at sunrise with the solar charge. The curves are missing; nothing moves on the structure, but the station does not have enough energy to last the night: to be checked (battery, panel).", "review": "2026-11-17"}
|
|
{"start": "2026-09-29T05:15Z", "end": "2026-09-29T12:30Z", "family": "Thermal displacement", "description": "At the restart at sunrise, after the night outage, the camera nods down: its tilt rises, with its scale and its rotation, and all the raw positions, references included, move together in the image; the tilt is highest in early morning, goes below its night level in late morning and comes back to it in early afternoon, while the housing temperature rises. The compensation follows most of it, but the target closest to the camera, PB1_2, at the bottom of the image, keeps part of the wave: its corr_x goes down clearly just after sunrise, the most in early morning, and comes back in mid-morning; PB2_2, the next closest, goes down a little on corr_x in the middle of the morning. At the same hours their raw positions move away from the overall movement of the targets, the others do not: a remainder of the camera movement that the compensation does not take at the nearest targets. The sunlit kerb shows as a bright band next to PB1_2 on the 07:15 thumbnail, but it is still lit on the 10:00 one, when the curve is back: it does not explain the dip; the error_value of PB1_2 rises by day like those of PB2_2 and PB4, not more. Deduced cause: the mount or the lens of the camera heats up in the sun; according to the expert, the road hardly moves with temperature. Normal, nothing to do; the morning dip of PB1_2 is not a movement.", "review": "2026-11-18"}
|
|
{"start": "2026-09-29T10:45Z", "end": "2026-09-29T11:15Z", "family": "Obstruction", "description": "Blurry shapes pass near the reference R2, translucent on the 11:00 image, a passing vehicle: R1, R2 and R3 are rejected and the basis changes; PB4, PB_5, PA3_2, PB1_2 and PB2_2 jump together on corr_x and corr_y for the time of one measurement. Everything comes back at the next measurement. The structure is not moving: point to ignore.", "review": "2026-11-17"}
|
|
{"start": "2026-09-29T21:00Z", "end": "2026-09-29T21:30Z", "family": "Obstruction", "description": "At night, the headlights of a vehicle appear very close to PA_9 (21:15 thumbnail, absent at 21:00 and 21:30): its measurement locks onto a headlight while staying under the threshold, and its corr_x, corr_y make a very large jump for the time of one measurement. The other targets and the compensation do not move. The structure is not moving: this point of PA_9 is false, to ignore.", "review": "2026-11-17"}
|
|
{"start": "2026-09-30T02:15Z", "end": "2026-09-30T05:45Z", "family": "No data", "description": "No measurement for any sensor at the end of the night, except two isolated measurements at 04:30 and 05:15 before the restart. The station shuts down for lack of energy: just before the outage, the battery is at its lowest and the voltage below its usual night level, and the metrics stop with the measurements; it restarts at sunrise with the solar charge. The curves are missing; nothing moves on the structure, but the station does not have enough energy to last the night: to be checked (battery, panel).", "review": "2026-11-17"}
|
|
{"start": "2026-09-30T02:15Z", "end": "2026-09-30T16:15Z", "family": "Displacement", "description": "On 30/09, during the night outage and the day that follows, two targets change level, then stay there until the end of the batch: corr_x of PB_5 rises, already higher at the isolated measurement of 04:30 and in place from early morning, near its level from before the outage of 09/09 (this is the return of PB_5 from that shift, labelled separately); corr_x of PA3_2 goes down over the day and stabilises in late afternoon. PB2_2 rises back the same day (separate label); the other targets do not move. Their spots stay sharp and round at night (23:00 thumbnails of 29 and 30/09), their night error_value barely rises, like that of PB4. The thumbnails of that day are darker than those of the previous days. Cause not established (an adjustment of the image capture after the outage, or a movement of these targets). To be checked: look at PB_5 and PA3_2, keep watching the following days.", "review": "2026-11-17"}
|
|
{"start": "2026-09-30T04:30Z", "end": "2026-09-30T12:15Z", "family": "Thermal displacement", "description": "At the restart at sunrise, after the night outage, the camera nods down: its tilt rises, with its scale and its rotation, and all the raw positions, references included, move together in the image; the tilt peaks in early morning, goes below its night level in late morning, then comes back to it in early afternoon, as every day, while the housing temperature rises; the scale and the pan come back more slowly, until mid-afternoon. The compensation follows: the corrected curves of the targets do not show this wave, only the daytime agitation (separate label), except PB1_2 and PB2_2, at the bottom of the image, whose corr_y rises at the height of the morning movement, following the overall movement, their raw position moving slightly away from it, then comes back in late morning: the compensation follows almost everything (according to the expert, the effect is well compensated); only a small deviation at the bottom of the image remains. Deduced cause: the mount or the lens of the camera heats up in the sun; according to the expert, the road hardly moves with temperature and the system compensates this movement well. Normal, nothing to do.", "review": "2026-11-17"}
|
|
{"start": "2026-09-30T07:30Z", "end": "2026-09-30T08:15Z", "family": "Obstruction", "description": "A large vehicle passes in front of PA3_2, the reference R2, PB4 and R1, seen as translucent on the 07:45 and 08:00 images: R1, R2 and R3 are rejected two measurements in a row and the basis changes; PB4 and PB_5 especially, PA3_2, PA2_2, PB2_2 and PB1_2 jump together on corr_x and corr_y. Everything comes back at 08:15. The structure is not moving: points to ignore.", "review": "2026-11-17"}
|
|
{"start": "2026-09-30T09:15Z", "end": "2026-09-30T09:45Z", "family": "Obstruction", "description": "Bright reflections of vehicles appear near the references R2 and R1 (09:30 image): R1, R2 and R3 are rejected and the basis changes; PB4, PB_5, PB2_2, PA3_2 and PB1_2 jump together on corr_x and corr_y for the time of one measurement. Everything comes back at the next measurement. The structure is not moving: point to ignore.", "review": "2026-11-17"}
|
|
{"start": "2026-09-30T10:45Z", "end": "2026-09-30T11:30Z", "family": "Obstruction", "description": "For two measurements in a row, R1 and R2 are rejected, with R3, and the basis changes: PB4 and PB_5 especially, PA3_2, PB2_2, PA2_2 and PB1_2 jump together on corr_x and corr_y, then everything comes back at 11:30. The 11:00 and 11:15 images show nothing clear near R1 and R2; cause deduced from the signature of the passages seen from the station (R1 and R2, on the same lane, lost together, back at the next measurement): vehicles passing in front of them. The structure is not moving: points to ignore.", "review": "2026-11-17"}
|
|
{"start": "2026-10-01T02:30Z", "end": "2026-10-01T03:15Z", "family": "Obstruction", "description": "At night, PB1_2 alone: at 02:45 its spot shrinks markedly (02:45 thumbnail, compared with those of 02:30 and 03:00, while those of PB2_2 and PB4 stay whole); its measurement is rejected, then at 03:00 its corr_x makes a spike and it has not come back to its level at 03:15, the last measurement before the night outage. PB2_2, its neighbour, drops on corr_x at the same moment and stays lower until the outage. Cause: something partly covers the spot of PB1_2, of a nature not seen (at the same hour as the obstruction of PB1_2 on 03/09). The structure is not moving: do not trust the curves of PB1_2 and PB2_2 over the range.", "review": "2026-11-17"}
|
|
{"start": "2026-10-01T03:15Z", "end": "2026-10-01T05:45Z", "family": "No data", "description": "No measurement for any sensor during the night, except two isolated measurements at 04:45 and 05:15 before the restart. The station shuts down for lack of energy: just before the outage, the battery is at its lowest and the voltage below its usual night level, and the metrics stop with the measurements; it restarts at sunrise with the solar charge, the compute board still cold (metrics). The curves are missing; nothing moves on the structure, but the station does not have enough energy to last the night: to be checked (battery, panel).", "review": "2026-11-17"}
|
|
{"start": "2026-10-01T04:45Z", "end": "2026-10-01T12:30Z", "family": "Thermal displacement", "description": "From sunrise until around noon, the camera moves through thermal effect, as every day: the tilt started to rise (the camera nods down) during the end-of-night outage: a little above its night level at the isolated measurement of 04:45, markedly at 06:00; it goes markedly below its level in late morning (at 10:45) and regains at 12:30 its afternoon level, a little below that of the night. The pan drops a little at sunrise (around 05:00-06:00); the rotation goes above its level around 10:00-10:30 and comes back around 12:30; at 08:30, when all the references are lost together, the pose makes a one-measurement jump (separate label); the scale rises with the temperature (markedly at 11:45) and comes back down only in the afternoon, still above its night level at 19:00. In the image, targets and references move together, as a block: y markedly positive at 06:00, then a little negative at 11:00 (ensemble.py --rigide; the targets move away from the block only barely). The housing temperature rises strongly from 04h to 07h (a little less hot at 09h, again at 11h) and stays hot at 12h: the tilt rises with the warming of the morning and comes back while the housing is still hot; the scale follows the temperature and comes back down with it. The compensation follows: on the corrected curves, the tilt wave explains little: before the loss of PA_8, barely more than the noise on each target, except PB1_2 (markedly on corr_x, over few measurements only); what remains is the daytime agitation, the steps of the loss of PA_8 and the common shift taken that day (separate labels). Cause given by the expert for this station (label of 27/09): the camera moves through thermal effect, on its lens or its mount; the road does not move with temperature. Normal, nothing to do.", "review": "2026-11-17"}
|
|
{"start": "2026-10-01T08:15Z", "end": "2026-10-01T13:15Z", "family": "Visibility", "description": "The reference PA_8 is rejected continuously from 08:30 to 13:00: the compensation runs without it, and the basis changes. PA_9, its neighbour in the image, rises markedly on corr_x and y stays on a step throughout the range; PA2_2, PA3_2, PB2_2 and PB_5 rise a little. At 08:30 and 09:15, all the references are lost together (08:30 image darker, the scene in shadow, with no obstacle): all targets jump for the time of one measurement, PA_9 especially. Everything comes back in part at 13:15, when PA_8 is taken again; PA_9 stays a little above its morning level until the evening. Cause: PA_8 poorly seen in full daylight, its spot faint on the background (14:00 thumbnail). The step is not a movement: curves of PA_9, PA2_2, PA3_2, PB2_2 and PB_5 not to be trusted over the range.", "review": "2026-11-17"}
|
|
{"start": "2026-10-01T13:00Z", "end": "2026-10-01T13:30Z", "family": "Perturbation", "description": "When the reference PA_8 is taken again, on 01/10 at 13:15, all the targets find themselves shifted from their level of late September, with the six references in the compensation: corr_y lower for all of them, together; corr_x higher for PA_9 and PA2_2, lower for PB1_2 and PB_5. The shift occurred between the night and noon, under the thermal movement of the morning and the loss of PA_8 (labelled separately): it cannot be dated more precisely. Relative to the overall movement of the targets, the references PA1_2 and PA_8 moved apart a little, mostly vertically, and R1 horizontally, whereas they followed it the evening before: the basis of references has changed a little, and all the targets inherit it together. The shift remains on 02/10 and 03/10 and fades on 04/10 (return labelled separately). Cause not established (a remainder of the camera movement poorly compensated, or a change in the appearance of these references). Nothing to do: do not read these days as a movement."}
|
|
{"start": "2026-10-01T13:45Z", "end": "2026-10-01T14:15Z", "family": "Visibility", "description": "The reference PA_8 is set aside again for the time of one measurement, after its long loss of the late morning (separate label): its spot is faint on the 14:00 thumbnail. The basis changes: PA2_2 and PB1_2 jump on corr_x, PA_9 and PA3_2 a little. Everything comes back at the next measurement. Cause: PA_8 poorly seen in daylight, as the same morning. The structure is not moving: point to ignore.", "review": "2026-11-18"}
|
|
{"start": "2026-10-01T21:30Z", "end": "2026-10-02T05:15Z", "family": "No data", "description": "No measurement for any sensor during the night, except one isolated measurement at 04:45. The station shuts down for lack of energy: just before the outage, the battery is at its lowest and the voltage below its usual night level, and the metrics stop with the measurements; it restarts at sunrise with the solar charge, the compute board still cold (metrics). The curves are missing; nothing moves on the structure, but the station does not have enough energy to last the night: to be checked (battery, panel).", "review": "2026-11-17"}
|
|
{"start": "2026-10-02T04:45Z", "end": "2026-10-02T13:00Z", "family": "Thermal displacement", "description": "From sunrise until around noon, the camera moves through thermal effect, as every day: its tilt (the camera nods down) is already high at the isolated measurement of 04:45, highest at 06:15, markedly above its afternoon rest; it goes markedly below this rest in late morning (at 11:30) and regains it at 13:00. The pan is a little lower than in the afternoon in the morning (around 05:15); the rotation goes markedly above its level (at 10:15) and comes back at 13:00; the scale rises with the temperature (markedly at 08:30) and comes back down in the afternoon, at its level around 17:30. In the image, targets and references move together, as a block: y markedly positive at 06:15, then a little negative at 11:30 (ensemble.py --rigide; the targets move away from the block only barely). The housing temperature rises strongly from 04h to 09h and stays hot at 13h: the tilt rises with the warming of the morning and comes back while the housing is still hot; the scale follows the temperature and comes back down with it. The compensation follows: on the corrected curves, the tilt wave explains little, apart from the steps of the loss of PA_8 (from 06:00 to 13:00) and of the first measurements without PA1_2 or PA_8, which make the targets jump; these episodes and the daytime agitation are labelled separately. Cause given by the expert for this station (label of 27/09): the camera moves through thermal effect, on its lens or its mount; the road does not move with temperature. Normal, nothing to do.", "review": "2026-11-17"}
|
|
{"start": "2026-10-02T05:15Z", "end": "2026-10-02T13:00Z", "family": "Visibility", "description": "At the restart at sunrise, after the night outage, the references PA1_2 and PA_8 are rejected together, then PA_8 alone at the next measurement: the basis changes and the corr_y of PA2_2, PB1_2, PB2_2 and PB_5 jump, PA2_2 strongly, then PA2_2 and PB2_2 on corr_x. PA_8 is then set aside at times in early morning, and continuously from 08:00 to 12:45: PA_9 rises on corr_x, PB1_2 too, PA2_2 a little, in steps that follow the entries and exits of PA_8; at 12:45, all the references are lost together, PA3_2 and PB4 rejected, with no obstacle visible on the image. Everything comes back when PA_8 is taken again at 13:00. Cause: PA_8 poorly seen in daylight, like the day before, and at sunrise PA1_2 with it. The steps are not a movement: curves of PA_9, PB1_2, PA2_2, PB2_2 and PB_5 not to be trusted over the range.", "review": "2026-11-18"}
|
|
{"start": "2026-10-02T12:45Z", "end": "2026-10-02T20:15Z", "family": "Obstruction", "description": "The reference PA1_2 is rejected without interruption from 13:00 until the evening outage: its spot is markedly smaller than at the same hours on the other days (18:00 thumbnail, compared with 01/10 and 06/10), while those of PA_8 and PA2_2 are whole. Without it, the basis changes: PA2_2, PA3_2 and PB_5 stay a little lower on corr_x than the evening before, PA_9 too, until the evening, with no return before the outage; the common shift of corr_y of all the targets, for its part, was already there the evening before with all the references (separate label); the next morning, PA1_2 is back. Cause: something partly covers the spot of PA1_2, of a nature not seen. The structure is not moving: slight shift of the curves not to be trusted; look at what is in front of PA1_2 if it comes back.", "review": "2026-11-17"}
|
|
{"start": "2026-10-02T16:15Z", "end": "2026-10-02T16:45Z", "family": "Obstruction", "description": "The headlights of a vehicle appear just above PB4 and PA3_2 (16:30 thumbnails, absent at 16:15): PA3_2 is rejected, PB4, which stayed under the threshold, locks onto a headlight and its corr_x, corr_y make a huge jump for the time of one measurement. The other targets do not move; everything comes back at the next measurement. The structure is not moving: this point of PB4 is false, to ignore.", "review": "2026-11-17"}
|
|
{"start": "2026-10-02T20:15Z", "end": "2026-10-03T05:00Z", "family": "No data", "description": "No measurement for any sensor during the night. The station shuts down for lack of energy: just before the outage, the battery is at its lowest and the voltage below its usual night level, and the metrics stop with the measurements; it restarts at sunrise with the solar charge, the compute board still cold (metrics). The curves are missing; nothing moves on the structure, but the station does not have enough energy to last the night: to be checked (battery, panel).", "review": "2026-11-17"}
|
|
{"start": "2026-10-03T05:00Z", "end": "2026-10-03T07:45Z", "family": "Obstruction", "description": "At sunrise, a line of cars parked along the pavement hides the references PA1_2 and PB3_2 and the targets PA2_2, PA3_2, PB2_2, PB4 and PB_5 (05:30 image, low sun in the field): their measurements are rejected until 06:30; with the other references poorly seen at sunrise, the compensation retains none at several moments (no recalibration at 05:00 and 05:45), and only PB1_2 keeps a curve, which jumps. At 06:45 the cars have left, except one in the background, in front of PA_9 (06:45 image), rejected until 07:30. Everything comes back afterwards. The structure is not moving: ignore the curves over the range.", "review": "2026-11-17"}
|
|
{"start": "2026-10-03T07:30Z", "end": "2026-10-03T08:00Z", "family": "Obstruction", "description": "At 07:45, vehicle reflections appear near the references R1 and R2 (07:45 thumbnails, absent at 07:30): they are set aside with R3, and the basis changes for the time of one measurement; all the targets jump together on corr_x and corr_y, PB4 and PA_9 the most, then come back at the next measurement. The structure is not moving: point to ignore.", "review": "2026-11-17"}
|
|
{"start": "2026-10-03T08:00Z", "end": "2026-10-03T13:45Z", "family": "Visibility", "description": "The reference PA_8 is set aside for most of late morning: the basis changes, and PA_9 rises on corr_x, PB1_2 and PA3_2 a little, in steps that follow the entries and exits of PA_8; everything comes back when it is taken again. Cause: PA_8 poorly seen in full daylight, like the two previous days. The steps are not a movement: curves of PA_9 and PB1_2 not to be trusted over the range.", "review": "2026-11-17"}
|
|
{"start": "2026-10-03T10:00Z", "end": "2026-10-03T10:30Z", "family": "Obstruction", "description": "A vehicle passes on the road in front of PA3_2 and PB4 (bright points and shadow on their 10:15 thumbnails, absent at 10:00): PB4 is rejected, with the reference R1; PA3_2, which stayed under the threshold, locks onto a reflection and its corr_x, corr_y make a huge jump for the time of one measurement. Everything comes back at the next measurement. The structure is not moving: this point of PA3_2 is false, to ignore.", "review": "2026-11-17"}
|
|
{"start": "2026-10-03T10:45Z", "end": "2026-10-03T11:15Z", "family": "Obstruction", "description": "A vehicle passes on the road, headlights and bodywork translucent on the 11:00 thumbnails: PA3_2 and PA_9 are rejected for the time of one measurement, with the reference R2, while PA_8 is set aside (separate label): the basis changes and PB2_2 and PB1_2 jump on corr_x, PA2_2 on corr_y. Everything comes back at the next measurement. The structure is not moving: point to ignore.", "review": "2026-11-18"}
|
|
{"start": "2026-10-03T11:45Z", "end": "2026-10-03T12:15Z", "family": "Obstruction", "description": "For the time of one measurement, PB1_2 and PB2_2 are rejected together: on their 12:00 thumbnails, a light silhouette passes translucent on the pavement, probably a passer-by. At the same measurement the reference PA1_2 is rejected too, while PA_8 is set aside (separate label): the basis changes and PA3_2 and PA2_2 jump a little on corr_y. Everything comes back at the next measurement. The structure is not moving: point to ignore.", "review": "2026-11-18"}
|
|
{"start": "2026-10-03T15:15Z", "end": "2026-10-04T15:45Z", "family": "Perturbation", "description": "On 04/10, the common shift of the targets taken on 01/10 (labelled separately) fades: after the night outage, the corr_y of PA_9, PA2_2 and PB4 comes back toward its level of late September over the day, that of PB_5 on 05/10; the references PA_8 and PA1_2 come closer at the same time to the overall movement of the targets. The outages of each night prevent dating the return more precisely. Cause not established; not an established movement of the road.", "review": "2026-11-17"}
|
|
{"start": "2026-10-03T15:30Z", "end": "2026-10-04T06:00Z", "family": "No data", "description": "No measurement for any sensor during the night, except three isolated measurements in the early morning, almost all rejected (at 05:30, all the references and all the targets, with no recalibration). The station shuts down for lack of energy: just before the outage, the battery is at its lowest and the voltage below its usual night level, and the metrics stop with the measurements; it restarts at sunrise with the solar charge, the compute board still cold (metrics). The curves are missing; nothing moves on the structure, but the station does not have enough energy to last the night: to be checked (battery, panel).", "review": "2026-11-17"}
|
|
{"start": "2026-10-04T06:45Z", "end": "2026-10-04T07:15Z", "family": "Obstruction", "description": "At 07:00, a dark silhouette passes translucent in front of the reference PA1_2 (07:00 thumbnail), probably a passer-by; PA1_2 and the reference PA_8 are rejected for the time of one measurement. The compensation then runs on three references (PB3_2, R1, R2; R3 is rejected as every day): the basis changes, PA2_2, PA3_2 and PA_9 jump on corr_y; everything comes back at the next measurement. The structure is not moving: point to ignore.", "review": "2026-11-17"}
|
|
{"start": "2026-10-04T11:45Z", "end": "2026-10-04T12:15Z", "family": "Visibility", "description": "The reference PA_8 is rejected for the time of one measurement: its spot is faint on the light background of the 12:00 thumbnail. The basis changes: PA2_2 and PB1_2 jump on corr_x, PB_5 and PB2_2 a little. Everything comes back at the next measurement. Cause: PA_8 poorly seen in daylight, as on the previous days. The structure is not moving: point to ignore.", "review": "2026-11-18"}
|
|
{"start": "2026-10-04T13:30Z", "end": "2026-10-04T14:00Z", "family": "Obstruction", "description": "Bright points appear near PB4 and PA3_2 (13:45 thumbnails, darker image), probably the reflections of a vehicle: PA3_2 and PB_5 are rejected, R1 and R2 set aside; PB4, which stayed under the threshold, locks onto a reflection and its corr_x, corr_y make a huge jump for the time of one measurement. Everything comes back at the next measurement. The structure is not moving: this point of PB4 is false, to ignore.", "review": "2026-11-17"}
|
|
{"start": "2026-10-04T14:00Z", "end": "2026-10-04T14:30Z", "family": "Visibility", "description": "At 14:15, the image is very dark, with a luminous haze on the pavement near the reference PA1_2 (14:15 image): PA1_2 is rejected and the basis changes for the time of one measurement; all the targets jump together on corr_x, in the same direction, then come back at the next measurement. Cause: a failed capture (exposure, reflection), not an obstacle. The structure is not moving: point to ignore.", "review": "2026-11-17"}
|
|
{"start": "2026-10-04T15:45Z", "end": "2026-10-05T06:00Z", "family": "No data", "description": "No measurement for any sensor during the night, except two isolated measurements at 04:30 and 05:00. The station shuts down for lack of energy: just before the outage, the battery is at its lowest and the voltage below its usual night level, and the metrics stop with the measurements; it restarts at sunrise with the solar charge, the compute board still cold (metrics). The curves are missing; nothing moves on the structure, but the station does not have enough energy to last the night: to be checked (battery, panel).", "review": "2026-11-17"}
|
|
{"start": "2026-10-05T08:00Z", "end": "2026-10-05T08:30Z", "family": "Obstruction", "description": "At 08:15, vehicle reflections dazzle the references R1 and R2 (large bright spots on their thumbnails): they are set aside, PA3_2 rejected, and the basis changes for the time of one measurement; PB4, PB_5, PB1_2 and PB2_2 jump together, then everything comes back at the next measurement. The structure is not moving: point to ignore.", "review": "2026-11-17"}
|
|
{"start": "2026-10-05T08:30Z", "end": "2026-10-05T09:00Z", "family": "Obstruction", "description": "At 08:45, as at 08:15 (separate label), the headlights of a vehicle shine near the reference R1 (08:45 thumbnail): it is rejected for the time of one measurement, the basis changes and PB4 jumps on corr_x; everything comes back at the next measurement. The structure is not moving: point to ignore.", "review": "2026-11-17"}
|
|
{"start": "2026-10-05T10:15Z", "end": "2026-10-05T11:15Z", "family": "Visibility", "description": "The reference R1 is rejected for two measurements: its spot is fainter, under a dark band that thickens just above it (10:30 and 10:45 thumbnails, compared with 10:15); no vehicle is seen in front of it. Without R1 the basis changes: PB4 jumps on corr_x at 10:30, the other targets barely. At 11:00, R1 is back and a vehicle passes in front of PB4 and PA3_2, seen translucent with its lights on their thumbnails: they are rejected with PA_9 for that measurement, without effect on the other curves. Everything comes back at 11:15. Cause: R1 less well seen, of a nature not established (a shadow on its background is possible). The structure is not moving: points to ignore.", "review": "2026-11-18"}
|
|
{"start": "2026-10-05T13:15Z", "end": "2026-10-05T13:45Z", "family": "Visibility", "description": "The reference R1 is rejected alone for the time of one measurement: on the 13:30 thumbnail, its spot is much brighter and larger than at the other measurements, like that of R2: a capture brighter than usual, with no obstacle. Without R1 the basis changes: PB4 and PB_5 jump a little on corr_x. Everything comes back at the next measurement. The structure is not moving: point to ignore.", "review": "2026-11-18"}
|
|
{"start": "2026-10-05T15:30Z", "end": "2026-10-06T05:45Z", "family": "No data", "description": "No measurement for any sensor during the night, until the first measurement of the morning. The station shuts down for lack of energy: just before the outage, the battery is at its lowest and the voltage below its usual night level, and the metrics stop with the measurements; it comes back at the end of the night with the compute board still cold (metrics), the first images a little before the first measurement. The curves are missing; nothing moves on the structure, but the station does not have enough energy to last the night: to be checked (battery, panel).", "review": "2026-11-18"}
|
|
{"start": "2026-10-06T05:45Z", "end": "2026-10-06T06:00Z", "family": "Visibility", "description": "At the first measurement after the night outage, at sunrise, the reference R2 is rejected with PB4: on the 05:45 thumbnail, bright streaks of the low sun surround R2. Without R2 the basis changes and PB_5 jumps on corr_x; it is back at the next measurement, R2 and PB4 still rejected there, as every morning at this hour. Cause seen: the low sun on the background of R2. The structure is not moving: point to ignore.", "review": "2026-11-18"}
|
|
{"start": "2026-10-06T05:45Z", "end": "2026-10-06T12:30Z", "family": "Thermal displacement", "description": "From sunrise until around noon, the camera moves through thermal effect, as every day: its tilt (the camera nods down) is highest from the first measurement of 05:45, markedly above its afternoon rest; it comes back down quickly (a little below this rest at 07:30), makes a plateau a little above its rest from 08:00 to 09:30, when the housing temperature drops back a little, goes below its rest (at 11:00) and regains it at 12:30. The rotation goes markedly above its level in late morning (at 11:00) and comes back at 12:30; the pan is agitated around its level; the scale rises a little with the temperature and comes back down in the afternoon, at its level around 15:00. In the image, targets and references move together, as a block: y markedly positive at 05:45, then a little negative at 11:00 (ensemble.py --rigide; the targets move away from the block only barely). The housing temperature rises strongly from 04h to 07h, drops back a little at 08h and 09h, and regains its 07h level from 11h to 12h: the tilt rises with the warming of the morning and comes back while the housing is still hot; the scale follows the temperature and comes back down with it. The compensation follows: on the corrected curves, the tilt wave weighs only a little, except on PB1_2 (a little more on corr_x), whose descent from 08:30 is labelled separately; what remains is the daytime agitation and the passages (separate labels). Cause given by the expert for this station (label of 27/09): the camera moves through thermal effect, on its lens or its mount; the road does not move with temperature. Normal, nothing to do.", "review": "2026-11-17"}
|
|
{"start": "2026-10-06T06:00Z", "end": "2026-10-06T06:30Z", "family": "No data", "description": "The 06:15 measurement is missing for all the sensors, two measurements after the restart from the night outage (labelled separately). The station is running: an image exists at 06:17 and the metrics continue, the voltage normal for the hour. Cause not established. The curves miss one measurement; nothing to do.", "review": "2026-11-18"}
|
|
{"start": "2026-10-06T06:30Z", "end": "2026-10-06T07:00Z", "family": "Obstruction", "description": "At 06:45, a vehicle passes on the road above the row of targets: on the darker 06:45 image, dozens of bright points at the top of the scene (its lights and reflections, translucent), absent at 06:30. PA3_2, PB4, PB_5 and the reference R2 are rejected, R1 set aside: the compensation runs on three references (PA1_2, PA_8, PB3_2), the basis changes, PB1_2 and PB2_2 jump; everything comes back at the next measurement. The structure is not moving: point to ignore.", "review": "2026-11-17"}
|
|
{"start": "2026-10-06T07:30Z", "end": "2026-10-06T08:00Z", "family": "Obstruction", "description": "At 07:45, a passer-by walks on the pavement very close to the reference PA1_2, and a vehicle passes in the background near R1 and R2 (07:45 image): the compensation loses all its references, PA3_2 and PA_9 are rejected, and the other targets jump for the time of one measurement, PB4 the most. Everything comes back at the next measurement. The structure is not moving: point to ignore.", "review": "2026-11-17"}
|
|
{"start": "2026-10-06T08:00Z", "end": "2026-10-06T08:30Z", "family": "Visibility", "description": "The reference PA_8 is rejected for the time of one measurement: its spot is very faint on the 08:15 thumbnail, sharp again at 08:30. Without PA_8, and with R3 taken at that measurement although usually rejected by day, the basis changes: PB1_2 jumps strongly on corr_x, PA2_2 and PA_9 clearly, PA_9 and PB1_2 a little on corr_y. Everything comes back at the next measurement. Cause: PA_8 poorly seen in daylight. The structure is not moving: point to ignore.", "review": "2026-11-18"}
|
|
{"start": "2026-10-06T08:30Z", "end": "2026-10-06T09:00Z", "family": "Displacement", "description": "PB1_2 alone, on the pavement kerb, goes down at once on corr_x between 08:30 and 08:45 and stays lower in the evening and the next day; its raw position has shifted a little, alone, relative to the set of targets, and its error_value does not change level. On 08/10, it goes down again, with its neighbour PB2_2 (labelled separately). Cause not established (PB1_2 had already been disturbed by something in September): a movement of the kerb is not excluded. To be checked: look at the target PB1_2, keep watching.", "review": "2026-11-17"}
|
|
{"start": "2026-10-06T08:45Z", "end": "2026-10-06T09:45Z", "family": "Visibility", "description": "The reference R1 is rejected for the time of one measurement: its spot is faint on the 09:00 thumbnail, without an obstacle. The basis changes: PB1_2 jumps strongly on corr_x, PB2_2 on corr_y and corr_x, PA3_2, PA2_2 and PB_5 on corr_x, PB1_2 and PA2_2 on corr_y. Everything comes back at 09:15, except PA3_2 and PA2_2, a little high on corr_x for one or two more measurements, back at 09:45. It falls just after the step of PB1_2 (separate label), which it does not change. Cause: R1 less well seen in daylight. The structure is not moving: points to ignore.", "review": "2026-11-18"}
|
|
{"start": "2026-10-06T10:15Z", "end": "2026-10-06T11:15Z", "family": "Obstruction", "description": "A group of passers-by walks along the pavement and the kerb, as blurry trails in front of almost the whole scene (10:45 image): at 10:30, R1 and R2 are set aside, PA3_2 and PB4 rejected, the other targets jump; at 10:45, all the references and all the targets are rejected, the camera is not recalibrated, no curve. Everything comes back at 11:00. The structure is not moving: ignore these two points.", "review": "2026-11-17"}
|
|
{"start": "2026-10-06T14:15Z", "end": "2026-10-06T14:45Z", "family": "Visibility", "description": "At 14:30, the image is very dark (thumbnails of R1, R2 and PB4 almost black): R1 and R2 are set aside, PB4 rejected, and the basis changes for the time of one measurement; PA3_2, PB_5 and PB1_2 jump together, then come back at the next measurement. Cause: a capture that is too dark, not an obstacle. The structure is not moving: point to ignore.", "review": "2026-11-17"}
|