Files
aimsight-labeling/auto/analyses/CLARIDEN_2026-10-20T0400_2026-11-01T0010/report.md
T

6.6 KiB
Raw Blame History

CLARIDEN: verification of the labels, 20 October to 1 November

You asked me to verify the 21 labels already placed on this range (keep, correct, remove, add).

In short

The 21 labels hold. I removed none and moved no event; 9 needed fixes, mostly start and end times that fell between two measurements. I added 3 events they had missed.

Outside the labelled moments the curves can be trusted. Inside them, the brief jumps (22nd morning, 30th evening, 31st) are not movements.

Several target rows move slowly on their own, in the image, then partly come back; the cause is not established. A movement of these targets is not excluded.

Verification

Kept 12, corrected 9, removed 0, added 3. The one long label that crosses the range (CLARIDEN-1, target P-300-B always rejected) holds.

  • CLARIDEN-25: 20:45 → 21:45 becomes 20:40 → 21:40, the measurements on either side of the gap.
  • CLARIDEN-26: end 08:45 becomes 08:50, the first measurement where the curves are back.
  • CLARIDEN-28: start 08:45 becomes 08:50, when the row B rise is first seen.
  • CLARIDEN-33: end 15:15 becomes 15:10, the first measurement after the gap.
  • CLARIDEN-38: 23:45 → 00:15 becomes 23:50 → 00:10. The jump is exactly at 00:00.
  • CLARIDEN-39: end 17:45 becomes 17:50. I also rewrote the description: the gap belongs to CLARIDEN alone. All the other stations measured. The station's own minute-by-minute record stops for half an hour, while the 17:00 image exists and the voltage is normal.
  • CLARIDEN-40: start 13:45 becomes 13:50, the measurement before the first jump at 14:00.
  • CLARIDEN-41: start 18:45 becomes 18:40, the measurement before the first jump at 18:50.
  • CLARIDEN-42: start 22:15 becomes 22:20, the measurement before reference PR-295 is first rejected at 22:30.
  • Added: the slow return of row A in the vertical, 25/10 19:10 → 29/10 04:00.
  • Added: a one-measurement jump of row A caused by reference PR-291, 30/10 18:10 → 18:30.
  • Added: the camera moving with the housing warmth on the 31st, 09:20 → 15:00.

The station measures every 10 minutes. The old bounds at :15 and :45 were not measurement times, which is why most of these fixes are a few minutes.

What happened

Rows of targets that move slowly, alone (20th to 29th; likely real, cause unknown). Row C rises from the 20th to the 25th, then partly comes back. Row B rises on the 22nd, drops below its level, and partly recovers. Row B steps down on the 28th. Row A rises in jolts on the 24th and 25th. These were already labelled. What was missing is row A's vertical return: from the 26th to the 29th it comes back to about where it was before the jolts, while its horizontal stays shifted. These targets really move in the image against the others. The camera is not involved and the temperature is flat.

Row A in the vertical Look at the grey zone: the four row A targets drift back down after the jumps of the 24th and 25th.

A reference that moves alone for one measurement (30th, 18:20; mechanism confirmed, cause unknown). Reference PR-291 shifts slightly for one measurement. The correction carries that shift into the left-hand targets, which jump horizontally and come back at once. The targets themselves do not move in the image. One point to ignore.

Camera warmth on the 31st (likely). From late morning, the housing warms by less than a degree. The camera's apparent zoom and its horizontal angle drift with it, then come back in the early afternoon when it cools. The correction absorbs most of it, but D-301-C, D-304-C, D-303-C and D-304-B follow a little. This is normal.

31 October In the grey zone, D-304-C (bottom) and D-301-C (top) shift slightly, then come back. The sharp dips just after, at 19:00 and around 23:00 are the view-obstruction episodes already labelled.

What to do

Compare rows A, B and C with the site's other measurement systems for 20–29 October.

Not established

  • The cause of the slow row movements: the site's other measurements would settle whether the structure moved.
  • The cause of the PR-291 shift on the 30th: there is no image at that minute.
  • The cause of the station's half-hour silence on the 30th at 17:00: the station's logs would tell.

Labels

Start (UTC) End (UTC) Family Targets In a few words
2026-10-20 04:00 2026-10-25 18:00 Displacement D-301-C, D-304-C, D-303-C row C slow rise (kept)
2026-10-20 06:10 2026-10-20 06:30 No data all one measurement missing (kept)
2026-10-20 20:40 2026-10-20 21:40 No data all five missing (bounds fixed)
2026-10-22 06:30 2026-10-22 08:50 Visibility row B, D-301-C, P-301-B view obstruction (end fixed)
2026-10-22 08:00 2026-10-22 09:20 Thermal displacement camera housing cold dip (kept)
2026-10-22 08:50 2026-10-22 17:00 Displacement D-306-B, row B row B rises (start fixed)
2026-10-22 17:00 2026-10-23 10:30 Displacement D-306-B, row B row B drops back (kept)
2026-10-24 01:00 2026-10-24 05:00 Displacement D-306-B, D-304-B, D-303-B row B partly rises (kept)
2026-10-24 18:20 2026-10-25 19:10 Displacement row A, D-304-B, D-306-B, P-301-B jolts (kept)
2026-10-25 18:00 2026-10-29 04:00 Displacement D-304-C, D-303-C row C partial return (kept)
2026-10-25 19:10 2026-10-29 04:00 Displacement D-304-A, D-303-A, D-302_A, D-301-A row A vertical return (added)
2026-10-26 14:30 2026-10-26 15:10 No data all gap common to the stations (end fixed)
2026-10-27 09:00 2026-10-27 09:30 No data all gap common to the stations (kept)
2026-10-27 12:00 2026-10-27 12:20 Target issue PR-284 one false point (kept)
2026-10-28 19:20 2026-10-28 20:10 Displacement D-306-B, D-304-B, D-303-B row B steps down (kept)
2026-10-29 14:50 2026-10-29 15:10 No data all gap common to the stations (kept)
2026-10-29 23:50 2026-10-30 00:10 Target issue D-302-B, PR_BG configuration jump (bounds fixed)
2026-10-30 17:00 2026-10-30 17:50 No data all station silent on its own (rewritten)
2026-10-30 18:10 2026-10-30 18:30 Displacement row A via PR-291 one-point jump (added)
2026-10-31 09:20 2026-10-31 15:00 Thermal displacement camera; D-301-C, D-304-C housing warmth (added)
2026-10-31 13:50 2026-10-31 15:10 Visibility D-301-C, D-302-B, PR_BG view obstruction (start fixed)
2026-10-31 18:40 2026-10-31 20:00 Visibility D-301-C, PR-295 view obstruction (start fixed)
2026-10-31 22:20 2026-11-01 00:00 Visibility PR-295, many targets reference seen poorly (start fixed)
2026-10-31 23:10 2026-11-01 00:10 Thermal displacement camera housing cold dip (kept)