- 32 analyses: each label kept, rewritten or removed by its analyst (section Requalification of the report; mm magnitudes where the targets have them) - SNCF01 x3, WILDSTRUBEL 2026-09-01 -> 2026-10-06 x3: verified from their existing labels under the new rules - long labels (no analysis): auto/analyses/long-labels/<STATION>/; NORDEND-169 and -195 run to 07/11, so NORDEND-283 and -284 (their continuation) are removed - reading-rules.md, stations.md: the citations of removed or rewritten labels point to their successor, or to [expert] Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
27 lines
24 KiB
JSON
27 lines
24 KiB
JSON
{"start": "2026-10-24T16:30Z", "end": "2026-10-25T09:00Z", "family": "Visibility", "description": "Night of rain: the drops on the window show as many blurred discs lit by the infrared (04:00 image). Almost all the targets are rejected for a large part of the night; the three references CTR02, CTR03 and CTR04 are in turn, the camera is often no longer re-registered, and at times no target has a measurement; in between, the remaining targets jump together on corr_x and corr_y at each switch of references. Back to normal in the morning, when the rain stops; PR08 stays rejected for another hour. No measurement is valid over the range; the structure does not move.", "review": "2026-11-17"}
|
|
{"start": "2026-10-25T05:45Z", "end": "2026-11-07T14:00Z", "family": "Visibility", "description": "After the rain, new marks of drops remain on the window (blurred discs visible every night from the 26/10 03:00 image, absent on 22/10, still there on 02/11 22:00), including one on the left part of the group, near CTR02, PR09, PR10 and PR11. Since then, the sigma0 of the registration is higher, the corrections of the references CTR02, CTR03 and CTR04 have changed level, and the corr of PR09, PR10 and PR11 stay offset (PR10 mostly on corr_y, PR09 on corr_x and corr_y, PR11 on both), with a slightly higher error_value; the other targets move little. The offset does not come back until the end of the range: the night levels of PR09, PR10 and PR11 in November are still those of the end of October. Cause seen on the images: the window is dirty. This is not a movement; clean the window, do not read these plateaus as a displacement."}
|
|
{"start": "2026-10-25T07:30Z", "end": "2026-10-26T07:15Z", "family": "Thermal displacement", "description": "Weak thermal cycle of the camera, after the night of rain: in the morning, when the housing warms up a little, the pan drops gently until early afternoon, then the camera comes back in the evening and at night, until the next morning. The compensation absorbs it poorly: the corr_x of PR18 drops in the morning and comes back in the afternoon. The plateaus of PR09, PR10, PR11 and of the references left by the rain continue underneath (separate label). Deduced cause: the pose follows the housing temperature, and the rock face of the quarry does not move with the temperature. Overcast day: the warming of the housing is weak, the camera movement and the dip of PR18 too. The structure does not move, nothing to do.", "review": "2026-11-17"}
|
|
{"start": "2026-10-26T07:15Z", "end": "2026-10-27T06:30Z", "family": "Thermal displacement", "description": "Weak camera thermal cycle: overcast day, the housing temperature rises only a little (highest around 14:00); the pan drops a little, the tilt rises by the same amount; but the camera does not come back overnight: on the morning of the 27th, the pan is even lower than the day before, by almost the whole of its daytime drop, after the rain of the 24th-25th and the marks it left on the window (separate label). The compensation does not quite absorb it: the corr_x of PR18 drops just beyond its noise from mid-morning to mid-afternoon and stays a little lower at night, with the camera; the corr_y of PR17 rises just beyond its noise in the afternoon; the other targets stay within or at the edge of their noise (PR04, hindered separately until the evening, apart). Deduced cause: the pose follows the housing temperature, and the quarry's rock face does not move with temperature. The structure is not moving, nothing to do."}
|
|
{"start": "2026-10-26T14:15Z", "end": "2026-10-26T15:00Z", "family": "No data", "description": "Two consecutive measurements are missing for all sensors, all curves have a gap; the voltage is normal around it. The same gap occurs at the same time on the other stations that measure at that time (CLARIDEN, FLORIDA, JUNGFRAU, LENZSPITZE, NIEDERHORN, SNCF01), and their metrics are also missing at the same minutes: a common cause outside the station (transmission or reception of the data), not a station failure; it is not established. The curves are missing over the range; nothing to do on the station. The hourly metrics of BREITHORN, MICHIGAN and NEBRASKA are also missing at 15:00.", "review": "2026-11-17"}
|
|
{"start": "2026-10-27T06:30Z", "end": "2026-10-27T16:30Z", "family": "Thermal displacement", "description": "Camera thermal cycle: in the morning, when the housing warms up (markedly, highest around 13:00), the camera turns: the pan drops a little, the tilt rises less; then it comes back in the afternoon, until the night of degrading visibility, then fog, when the pose is distorted (separate label). The compensation absorbs it poorly: the corr_x of PR18 dips markedly from mid-morning to mid-afternoon (deepest in early afternoon); the corr_y of PR13 and PR06 drops a little around midday, that of PR10 from late morning to the end of the label; the other targets stay near their noise. Deduced cause: the pose follows the housing temperature, and the quarry's rock face does not move with temperature. The structure is not moving, nothing to do."}
|
|
{"start": "2026-10-27T08:45Z", "end": "2026-10-27T09:15Z", "family": "No data", "description": "One measurement is missing for all sensors, all curves have a gap; the voltage is normal around it. The same gap occurs at the same time on the other stations that measure at that time (CLARIDEN, FLORIDA, JUNGFRAU, LENZSPITZE): a common cause outside the station (transmission or reception of the data), not a station failure; it is not established. The curves are missing over the range; nothing to do on the station.", "review": "2026-11-17"}
|
|
{"start": "2026-10-27T16:30Z", "end": "2026-10-28T09:15Z", "family": "Visibility", "description": "Night of degrading visibility, then fog in the morning, as one single episode: at the start of the night, PR07 and CTR01 are rejected, PR14, PR15 and PR18 a few times, with a small common jump of the targets that stayed under the threshold; then the error_value of PR08 rises, its corr_y shifts and PR07 stays shifted for a while; during the night, the spots of PR18, PR15, PR08 and PR09 weaken (01:00 image) and are rejected at times; in the morning the fog is visible on the image (07:00), the references CTR03 then CTR02 are rejected, the camera is no longer recalibrated at 07:15 and all the targets jump together in corr_x and corr_y, then come back when the references are found again. Nothing hides the targets. Not a movement; do not trust the curves over the range.", "review": "2026-11-17"}
|
|
{"start": "2026-10-28T09:15Z", "end": "2026-10-29T06:45Z", "family": "Thermal displacement", "description": "Camera thermal cycle, after the morning fog (separate label): when the housing warms up (markedly, highest around 14:00), the camera turns: the pan drops a little, the tilt rises a little less; then it comes back in the afternoon, the evening and the night, until the start of the next morning. The compensation absorbs it poorly: the corr_x of PR18 dips the most (very strongly, around 11:00) and comes back in the afternoon (about the noise level at 16:00); PR15, PR16, PR17 and PR11 follow markedly, PR14 and PR13 more weakly; the corr_y of PR18 rises markedly, that of PR09, PR10, PR11 and PR15 drops a little; the references move little. Deduced cause: the pose follows the housing temperature, and the quarry's rock face does not move with temperature. The structure is not moving, nothing to do.", "review": "2026-11-17"}
|
|
{"start": "2026-10-29T06:45Z", "end": "2026-10-30T07:45Z", "family": "Thermal displacement", "description": "Camera thermal cycle: in the morning, when the housing heats up in the sun (markedly, highest around 14:00), the camera turns: the pan drops markedly, the tilt rises by the same amount, the scale increases; then it comes back in the afternoon, the evening and the night, as the housing cools, until the start of the next morning. The compensation absorbs it poorly: the corr_x of PR18 dips the most (markedly, around 11:00) and comes back in the afternoon (barely above the noise at 16:00); PR14, PR16, PR17 and PR15 follow more weakly (a little); the corr_y of PR18 rises markedly, that of PR10, PR09 and PR11 drops markedly; the references move little. Deduced cause: the pose follows the housing temperature, and the quarry's rock face does not move with temperature. The structure is not moving, nothing to do.", "review": "2026-11-17"}
|
|
{"start": "2026-10-29T14:45Z", "end": "2026-10-29T15:15Z", "family": "No data", "description": "One measurement is missing for all sensors, all curves have a gap, although the 15:00 image exists; the voltage is normal around it. The same gap occurs at the same time on the other stations that measure at that time (CLARIDEN, LENZSPITZE, SNCF01): a common cause outside the station (transmission or reception of the data), not a station failure; it is not established. The curves are missing over the range; nothing to do on the station.", "review": "2026-11-17"}
|
|
{"start": "2026-10-30T07:45Z", "end": "2026-10-31T07:45Z", "family": "Thermal displacement", "description": "Camera thermal cycle: in the morning, when the housing heats up in the sun (markedly, highest around 14:00), the camera turns: the pan drops markedly, the tilt rises almost as much, the scale increases; then it comes back in the afternoon, the evening and the night, as the housing cools, until the start of the next morning. The compensation absorbs it poorly: the corr_x of PR18 dips the most (very strongly, around noon) and comes back in the afternoon (still a little at 16:00); PR16, PR13, PR17, PR14 and PR15 follow, markedly but more weakly; the corr_y of PR18 rises markedly, that of PR10 and PR09 drops markedly, up to strongly; the references CTR02 and CTR03 move away a little. The jumps from 08:45 to 10:45 come from the low sun (separate label). Deduced cause: the pose follows the housing temperature, and the quarry's rock face does not move with temperature. The structure is not moving, nothing to do.", "review": "2026-11-17"}
|
|
{"start": "2026-10-30T08:45Z", "end": "2026-10-30T10:45Z", "family": "Visibility", "description": "Mid-morning, low sun: the top of the image is very brightly lit and the quarry stays in shadow, the spots are barely visible (10:00 image). PR18 then PR17 are rejected first, then the references CTR02 and CTR03, the camera is no longer recalibrated for two measurements, and all the targets jump together in corr_x and corr_y; a good part of them are rejected. Everything comes back as soon as the light changes. Not a movement; do not trust these points.", "review": "2026-11-17"}
|
|
{"start": "2026-10-31T07:45Z", "end": "2026-11-01T06:00Z", "family": "Thermal displacement", "description": "Camera thermal cycle: in the morning, when the housing heats up in the sun (markedly, highest around 12:00), the camera turns: the pan drops markedly, the tilt rises by the same amount, the scale increases; then it comes back in the afternoon, the evening and all night, as the housing cools, with no rest until the turn of the next morning (01/11 06:00), when the next cycle starts. The compensation absorbs it poorly: the corr_x of PR16 and PR18 dips markedly around noon and comes back by 14:00; PR15 and PR17 follow more weakly; the corr_y of PR18 rises a little, that of PR10 drops markedly; the references CTR02 and CTR03 move away a little. Deduced cause: the pose follows the housing temperature, and the quarry's rock face does not move with temperature. The structure is not moving, nothing to do."}
|
|
{"start": "2026-11-01T06:00Z", "end": "2026-11-02T06:30Z", "family": "Thermal displacement", "description": "Camera thermal cycle without a return at night: in the morning the housing warms up markedly (highest in early afternoon) and the camera turns: the pan drops strongly until late morning, the tilt rises markedly, the rotation drops, the scale increases; in the afternoon and the evening the pose comes back only a little, then stays at this level all night, because the housing stays warm until the next morning instead of cooling as on the nights before. The compensation absorbs it poorly: the corr_x of PR18 dips markedly in late morning and comes back only partly, that of PR13 dips markedly and stays lower all night, PR17, PR16 and PR15 a little; the corr_x of PR04 rises markedly; the corr_y of PR04 rises markedly, that of PR13, PR17, PR18 and PR15 a little, PR13 and PR15 staying up at night. The pose and the curves come back when the housing cools again, on the evening of 03/11 (separate labels). Deduced cause: the pose follows the housing temperature, and the quarry's rock face does not move with temperature. The structure is not moving, nothing to do."}
|
|
{"start": "2026-11-02T19:15Z", "end": "2026-11-03T06:00Z", "family": "Obstruction", "description": "Cobweb threads stretched in front of the lens, lit by the infrared, cross the group of targets that night; a bright knot of threads sits between PR07, PR06 and PR08 (02/11 22:00 image), and the spot of PR07 is barely visible on the 20:00 and 04:00 thumbnails, while PR06 and PR13 stay sharp. PR07 is rejected for a large part of the night, from 19:30 to 04:30, and between the rejections its kept points are wrong: its corr_x jumps up at 23:30, then slides down strongly through the second half of the night and its corr_y drops a little, until 05:30. From 20:15 the error_value of PR08 rises and its corr_x drops by steps, markedly, its corr_y a little, without rejection, until 05:45. Both come back at 06:00. The other targets do not move. Cause seen on the images. Ignore the curves of PR07 and PR08 over the range; the structure is not moving. The threads have to be removed from the window."}
|
|
{"start": "2026-11-03T07:00Z", "end": "2026-11-03T23:00Z", "family": "Thermal displacement", "description": "Camera thermal cycle, with a return beyond the starting position: in the morning the housing warms a little (highest around noon) and the pan drops a little, the tilt rises a little, until late morning; around midday the pose fluctuates from one measurement to the next (jolts at 12:30 and 13:30, the second labelled separately); then from early afternoon the housing cools markedly, for the first time in three days, and the camera comes back beyond its morning position: the pan rises markedly, the tilt drops markedly, the scale drops, until late evening, when the housing starts warming again and the next cycle starts. The compensation absorbs it poorly: in the afternoon and the evening, as the camera comes back, the corr_y of PR12, PR05, PR10, PR06, PR01, PR03 and PR11 drops clearly, that of PR15, PR14 and PR16 a little, and they stay low until the next cycle brings them back; the corr_x of PR09 rises a little from the morning and stays raised, that of PR18 dips a little in late morning and rises above its level in the evening. Cobweb threads lit by the infrared cross the group of targets at night, one with a halo over PR18 (20:00 thumbnail), without rejection. Deduced cause: the pose follows the housing temperature, and the quarry's rock face does not move with temperature. The structure is not moving, nothing to do."}
|
|
{"start": "2026-11-03T23:00Z", "end": "2026-11-05T06:30Z", "family": "Thermal displacement", "description": "Camera thermal cycle of 04/11, which starts during the night: after the cooling of the evening of 03/11, the housing temperature rises again slowly from late evening, all night, then by day (highest around 14:00), and the camera turns: the pan drops markedly until early afternoon, the tilt rises markedly, the rotation drops a little, the scale increases; then from the evening, as the housing cools, it comes back, the pan rises markedly, the tilt drops by the same amount, the scale drops; it does not rest before the morning of 05/11. The compensation absorbs it poorly: the corr_y of PR12, PR05, PR10, PR06, PR01, PR03 and PR11, dropped the evening before, come back up through the morning; around 14:00 the corr_x of PR18, PR16, PR14, PR15 and PR13 dips a little and that of PR04 rises a little; at night the targets on the right edge (PR18, PR16, PR15, PR13) rise back in corr_x and the corr_y of PR16 and PR17 drops a little. Cobweb threads lit by the infrared cross the group of targets at night (04/11 02:00 thumbnail) without rejecting them. The jumps at 01:00, 01:15 and 03:30 on 05/11 come from the reference CTR03 (separate labels). Deduced cause: the pose follows the housing temperature, and the quarry's rock face does not move with temperature. The structure is not moving, nothing to do."}
|
|
{"start": "2026-11-05T00:45Z", "end": "2026-11-05T01:30Z", "family": "Obstruction", "description": "A thread of the cobweb stretched in front of the lens, lit by the infrared and beaded, passes over the reference CTR03 (01:00 thumbnail: a large, blurry, bright dot covers its spot, CTR02 and CTR04 stay sharp). CTR03 is rejected at 01:00 and 01:15: the compensation then runs only on CTR02 and CTR04 (their reprojection falls to zero, no more sigma0), the basis changes and almost all targets jump together, markedly downward in corr_y, a little upward in corr_x, PR17, PR18 and PR11 the most; the raw positions do not move. Everything comes back at 01:30. Cause seen on the thumbnail. Very bad sign for these two measurements: do not trust the curves over the range; the structure is not moving.", "review": "2026-11-17"}
|
|
{"start": "2026-11-05T03:15Z", "end": "2026-11-05T03:45Z", "family": "Obstruction", "description": "The reference CTR03 is rejected for one measurement, at 03:30: the compensation runs on CTR02 and CTR04 alone (reprojection at zero), and almost all targets jump together, markedly downward in corr_y, PR17, PR18 and PR13 the most, then come back at the next measurement. Deduced cause: the thread of the cobweb that wanders that night between CTR03 and CTR02 (01:00 and 04:00 thumbnails); there is no image at 03:30. Ignore the points at 03:30; the structure is not moving.", "review": "2026-11-17"}
|
|
{"start": "2026-11-05T06:30Z", "end": "2026-11-06T07:00Z", "family": "Thermal displacement", "description": "Camera thermal cycle: in the morning, when the housing heats up (markedly, highest around 14:00), the camera turns: the pan drops strongly until early afternoon, the tilt rises markedly, the rotation drops a little, the scale increases; then it comes back in the evening and all night, as the housing cools, with no rest until the start of the next morning. In the middle of the movement, the pose fluctuates from one measurement to the next: at 09:45, then at 12:00 when the whole scene, references included, makes a one-measurement jolt, many targets drop a little in corr_y and come back at once. The compensation absorbs it poorly on the right edge: the corr_x of PR18 dips markedly around noon, PR16, PR17, PR13 to PR15 a little; the corr_y of PR18, PR17 and PR16 rises a little; the curves come back in the evening. The jumps of the night come from CTR03 (separate label). Deduced cause: the pose follows the housing temperature, and the rock face does not move with temperature. The structure is not moving, nothing to do.", "review": "2026-11-17"}
|
|
{"start": "2026-11-05T11:45Z", "end": "2026-11-05T12:15Z", "family": "Displacement", "description": "For the duration of one measurement, at 12:00, in the middle of the camera thermal cycle (labelled separately), the pose makes a jolt: the rotation and the tilt jump then come back at the next measurement, and the raw positions of all sensors, references included, jump together in the image then come back, not quite by the same amount (CTR04 a little apart from the targets). The compensation does not quite erase it: the corr_y of PR01, PR10, PR02, PR04 and PR07 drops markedly, PR11, PR09 and PR17 a little, and the corr_x of PR01 and PR02 rises a little; everything comes back at 12:15. No reference is lost (all three stay in the compensation) and no target is rejected apart from CTR01, rejected as usual; the error_value of the reference CTR02 and of PR01, which comes and goes all morning with no effect on the curves, rises clearly at 12:00 with the jolt, under the threshold, and comes back at 12:15; that of PR09 barely moves. On the 12:00 image, sunny day, the targets in shadow, nothing in front of them. Cause not established: a jolt of the camera or of its mount, deduced from the pose. This is not a movement of the structure; points to ignore, the camera is to be watched if it repeats.", "review": "2026-11-17"}
|
|
{"start": "2026-11-05T23:00Z", "end": "2026-11-06T10:00Z", "family": "Obstruction", "description": "A thread of the cobweb stretched in front of the lens, lit by the infrared, settled on the reference CTR03 in the early evening (21:00, 23:00 and 06:00 thumbnails: a wide, bright, blurry band over its spot, CTR02 and CTR04 sharp next to it); its error_value then goes very close to the threshold and stays there. CTR03 is rejected at many measurements, from 23:15 to 09:45: at each one, the compensation runs only on CTR02 and CTR04 (reprojection at zero, no more sigma0), the pose flips and almost all targets jump together, markedly downward in corr_y and a little upward in corr_x, PR17, PR18, PR11 and PR13 the most, then come back at the next measurement: the curves look like a comb of spikes. The raw positions do not move. The disturbance continues by day without rejection (label of the following night separate). Cause seen on the images. Very bad sign for these measurements: do not trust the points of the range; the structure is not moving. The thread has to be removed from the window.", "review": "2026-11-17"}
|
|
{"start": "2026-11-06T07:00Z", "end": "2026-11-07T06:30Z", "family": "Thermal displacement", "description": "Camera thermal cycle: in the morning, when the housing heats up (markedly, highest in early afternoon), the camera turns: the pan drops strongly, the tilt rises markedly, the rotation drops a little, the scale increases; then it slowly comes back in the afternoon and at night, as the housing cools less than the day before, without coming all the way back: the next morning, the pan stays lower and the tilt higher than at the start. The compensation absorbs it poorly on the right edge: the corr_x of PR18 dips markedly in the afternoon, PR16, PR15 and PR13 a little less, PR17 and PR14 a little; PR04 rises a little; the corr_y of PR18, PR16, PR17, PR15 and PR08 rises a little. The spikes of the morning and of the night come from CTR03 (separate labels). Deduced cause: the pose follows the housing temperature, and the rock face does not move with temperature. The structure is not moving, nothing to do.", "review": "2026-11-17"}
|
|
{"start": "2026-11-06T21:15Z", "end": "2026-11-07T11:00Z", "family": "Obstruction", "description": "Second night of the cobweb thread on the reference CTR03 (the first is labelled separately, on 05/11 at 23:00): the bright, blurry band, lit by the infrared, still covers its spot (04:00 thumbnail); CTR03, which stayed near the threshold all day, is rejected at many measurements from 21:30 to 10:45, more and more often toward the morning. At each rejection, the compensation runs only on CTR02 and CTR04 (reprojection at zero), the pose flips and almost all targets jump together, markedly downward in corr_y and a little upward in corr_x, PR17, PR18, PR11 and PR13 the most, then come back at the next measurement. The raw positions do not move. After 11:00, CTR03 stays under the threshold and no longer disturbs the curves; at 12:30 its error_value falls back to its level, and in the evening the thread has moved beside its spot (07/11 20:00 image). Cause seen on the images. Very bad sign for these measurements: do not trust the points of the range; the structure is not moving. The thread has to be removed from the window.", "review": "2026-11-17"}
|
|
{"start": "2026-11-07T06:30Z", "end": "2026-11-07T14:00Z", "family": "Thermal displacement", "description": "Camera thermal cycle, until the end of the batch: in the morning, when the housing warms up (less than the days before), the camera turns: the pan drops markedly, the tilt rises markedly, the rotation drops, the scale increases; at the end of the batch it has not yet come back. The compensation absorbs it poorly: the corr_x of PR18 and PR13 dips a little, PR16 a little less; the corr_y of PR06 rises markedly, that of PR16 and PR15 a little. The spikes until 10:45 come from CTR03 (separate label). Deduced cause: the pose follows the housing temperature, and the rock face does not move with temperature. The structure is not moving, nothing to do.", "review": "2026-11-17"}
|