Files
aimsight-libredesk/snippets/textes/station-guide-exposure-and-image-preparation.md
maximeandClaude Opus 5.5 10ed887417 Noms plus clairs : snippets/, scripts de test numérotés, verifier_ollama.py
- base_connaissances/ → snippets/ (corpus/ → textes/, instructions.md → consignes_redaction.md, decoupage.py → fichiers.py, importer.py → envoyer.py) ; python3 -m snippets.envoyer.
- instance-de-test/ : 1_demarrer.sh, 2_creer_boite_et_cle.py, 3_brancher_ia.py, 4_essayer_brouillons.py, voir_empreintes.sh, connexion_admin.py.
- ollama/verifier.py → ollama/verifier_ollama.py ; tests, tâches VS Code et docs alignés.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-12 10:27:06 +01:00

1.6 KiB

Station Guide — Exposure and Image Preparation

• Exposure: Aim for high contrast in the marker or reflector regions. Ideally, the reflector images should be bright, with brightness values above about 200 when hovering over them, and surrounded by a dark background. This is usually achieved with short exposure times, typically in the 0.1 ms to 10 ms range. When in doubt, use a shorter exposure time. • Plot brightness slider: adjusts only the display brightness of the image plot to help you assess exposure. It does not change the actual camera exposure time. • Recapture: clicking “Recapture” triggers a new image acquisition using the latest settings and updates the displayed image-processing zones and their names. • Image Type: for dynamic acquisitions using reflective targets as position markers, select “Single with infrared light”. The other options are mainly intended to optimize image acquisition in quasi-static monitoring scenarios. The differential image shows a contrastenhanced view of the reflectors in the scene and is used by the displacement-measurement algorithms by default. “Single with infrared light” captures one infrared-illuminated image per measurement and is best suited to dynamic measurements. “Differential” combines several images to increase target contrast and improve quasi-static tracking. In difficult lighting conditions or with targets that are not sufficiently reflective, use Differential mode with a higher Stacking value, typically between 20 and 40. Higher stacking improves detection range but reduces the effective measurement rate.

Source : AIMsight Station Guide, rév. 1.5