{"id":"CLARIDEN-1","start":"2026-10-01T00:00Z","end":"2026-11-01T00:00Z","family":"Target issue","description":"The target P-300-B is rejected at every measurement of the batch: its recognition error stays almost at 1, its corrected curve is missing over the whole month. This has lasted since 29 September in the late afternoon, the time when the recognition error of other targets, including its neighbor P-301-B, also changes level all at once: a station setting changed that day. On the thumbnails (the 1st, the 15th and the 31st), the prism spot is sharp and bright, but next to the position where the system looks for it: the target seems badly configured or badly positioned, not hidden. Curve to ignore; correct the position of the target in the configuration or check the prism.","review":"2026-11-17","analysis":"CLARIDEN_2026-10-01T0000_2026-11-01T0000"}
{"id":"CLARIDEN-14","start":"2026-10-06T22:00Z","end":"2026-10-11T06:00Z","family":"Displacement","description":"Slow drift of several targets over four days, made of small steps, then stabilization: D-303-B rises vertically, D-303-C and D-304-C rise vertically, D-301-C rises horizontally, D-306-B goes down horizontally. The camera moves: its tilt drifts slowly over the same days, with a small step on the 8th, and these targets follow it closely in the directions of their curves; the compensation does not absorb this tilt equally on every target. Ordinary recognition error, nothing on the images. The camera housing temperature stays almost constant over these days: no link with it. Slow return from the 11th to the 19th, labeled separately. Deduced from the curves and the camera pose: mostly a remainder of the camera tilt, not established as a movement of the structure; the camera is to be monitored, and these targets checked against the other measurements of the site.","analysis":"CLARIDEN_2026-10-01T0000_2026-11-01T0000"}
{"id":"CLARIDEN-72","start":"2026-10-11T06:00Z","end":"2026-10-16T12:00Z","family":"Displacement","description":"The targets of row C slowly come back after their drift of the 6th to the 11th: D-301-C goes back down horizontally from the 11th to the 15th, D-304-C and D-303-C go back down vertically from the 12th until the first measurements after the gap of the night of the 15th to the 16th, then stay at that level until the 17th: the return is over. Their later movements are not part of it: the dip of the 18th and 19th follows the slow tilting of the camera and comes back at its jump of the 20th (both labeled separately). These movements do not follow the slight straightening of the camera of the 11th to the 13th either, which leaves only a remainder within the noise on the curves: they continue while the camera is still. Nothing in front of the targets on the image of the 13th. The housing temperature stays almost constant over these days: no link with it. This is the return of the drift of the 6th to the 11th, labeled separately. Cause not established, in a tunnel under construction: a movement of these targets is not excluded. To be checked against the other measurements of the site; monitor this row.","analysis":"CLARIDEN_2026-10-11T0000_2026-10-20T0400"}
{"id":"CLARIDEN-50","start":"2026-10-11T08:50Z","end":"2026-10-11T09:10Z","family":"Displacement","description":"For one measurement, the corrected vertical curves of many targets drop together, then come back at the next one. D-304-A, D-301-A, D-303-A and D-302_A drop the most; D-301-C, D-302-B and PR_BG (same prism), P-299-B, P-301-B and P-299-A drop less. At that measurement, the whole scene shifts slightly in the image and the camera pose jumps (rotation, tilt), but the reference D-302-C does not follow the other references: the compensation is skewed for one measurement. The recognition error does not move. The image of that instant shows nothing in front of the targets. Cause not established; points to ignore, not a movement of the structure.","analysis":"CLARIDEN_2026-10-11T0000_2026-10-20T0400"}
{"id":"CLARIDEN-52","start":"2026-10-15T22:50Z","end":"2026-10-16T10:30Z","family":"No data","description":"No measurement or image for almost twelve hours, on the night of 15 to 16, and no station metric. The gap starts at the same time, around 23:00, on the nine stations that were measuring then (LENZSPITZE only has its first measurements in the middle of that night, WILDSTRUBEL is already stopped), and their metrics stop at the same time on most of them; measurements and metrics resume at different times depending on the station, most of them in late morning. JUNGFRAU, whose metrics continue, accumulates unsent entries all night, sent in late morning, and yet its measurements for the night are missing from the data: a common cause outside the stations (transmission or reception of the data), not a shutdown of the stations; it is not established. In addition, at CLARIDEN, the station restarts on its battery: the voltage stays well below its usual level, without charge, until early afternoon, then charging resumes; its power supply was also missing that night. The curves are missing over the range; check the site power supply if it repeats.","analysis":"CLARIDEN_2026-10-11T0000_2026-10-20T0400"}
{"id":"CLARIDEN-17","start":"2026-10-16T14:20Z","end":"2026-10-16T14:40Z","family":"No data","description":"One measurement is missing, for all sensors, a few hours after the resumption of the 16th: the curves have a short gap; normal voltage around it. The same gap falls at the same moment on the other stations measuring at that time (FLORIDA, LENZSPITZE, NORDEND, SNCF01): a common cause outside the station (transmission or reception of the data), not a failure of the station; it is not established. The curves are missing over the range; nothing to do on the station.","review":"2026-11-17","analysis":"CLARIDEN_2026-10-11T0000_2026-10-20T0400"}
{"id":"CLARIDEN-53","start":"2026-10-17T16:00Z","end":"2026-10-20T00:30Z","family":"Displacement","description":"From the 17th to the 19th, the camera slowly tilts the other way: its tilt goes down, more and more after the restart that follows the outage of the 18th; it partly comes back during the 19th, then suddenly jumps back on the 20th (labeled separately). The raw positions of all sensors, references included, move together vertically in the image with it. The compensation does not render this movement evenly. The corrected vertical curves of D-302-B and PR_BG (same prism) rise. Those of D-303-B, D-304-B, P-301-B, D-306-B, D-303-C and D-304-C go down, and D-301-C rises a little horizontally. They follow the tilt step by step, come back partly with it on the 19th, and return at once at the camera jump of the 20th. The recognition error stays at its level, and the image of the 19th shows nothing in front of the targets. The housing temperature drops a little on the 18th and is low at the restart after the outage; but the tilt keeps going down after the housing has warmed again, and it does not come back at equal temperature: link not established. This is not a movement of the structure but the remainder of an incomplete compensation of the camera movement; the camera is to be monitored.","analysis":"CLARIDEN_2026-10-11T0000_2026-10-20T0400"}
{"id":"CLARIDEN-54","start":"2026-10-18T06:30Z","end":"2026-10-18T06:50Z","family":"Displacement","description":"For one measurement, the corrected horizontal curves of the targets of row A (D-304-A, D-302_A, D-303-A, D-300-A, P-298-A, D-301-A) and of D-302-B and PR_BG (same prism) jump together, then come back at the next one. The raw positions of the targets do not move; the references PR-291, PR-293 and PR-295 shift slightly horizontally against them, and the camera pose jumps (pan, scale): the compensation is skewed for one measurement. The recognition error stays at its level. There is no image at that instant; the image of the next hour shows work lights at the far end of the tunnel and nothing in front of the targets. Cause not established; points to ignore, not a movement of the structure.","analysis":"CLARIDEN_2026-10-11T0000_2026-10-20T0400"}
{"id":"CLARIDEN-55","start":"2026-10-18T08:50Z","end":"2026-10-18T09:30Z","family":"Visibility","description":"For three measurements, the corrected curves of many targets make a bump that comes back: first the targets of row A (D-300-A, D-301-A, D-302_A, D-303-A, D-304-A, P-298-A) rise vertically; over the next two measurements, the recognition error of most targets and of the references PR-293 and PR-295 rises, D-302-B and PR_BG (same prism) rise strongly vertically, D-301-C goes down strongly horizontally, and P-301-B and D-303-B move horizontally. All come back at the following measurement. The camera pose jumps at the same time (tilt, scale), and the housing temperature drops. The image of the first measurement shows nothing in front of the targets. The signature is that of the other view obstruction episodes at the station: the error rises on most sensors, and the edges are sharp. Reduced visibility is deduced from it; the cause is not seen. Points to ignore.","analysis":"CLARIDEN_2026-10-11T0000_2026-10-20T0400"}
{"id":"CLARIDEN-56","start":"2026-10-18T13:50Z","end":"2026-10-18T23:30Z","family":"No data","description":"No measurement or image for almost ten hours, nor station metric. On resumption, the battery is depleted and the voltage low, then they rise: signature of a power cut. The curves are missing over the range; check the power supply if it repeats.","analysis":"CLARIDEN_2026-10-11T0000_2026-10-20T0400"}
{"id":"CLARIDEN-57","start":"2026-10-19T09:00Z","end":"2026-10-19T10:10Z","family":"No data","description":"Four measurements are missing within one hour, for all sensors, between isolated measurements: the curves have gaps; normal voltage around them. The same gap falls at the same moment on the other stations measuring at that time (FLORIDA, JUNGFRAU, LENZSPITZE, NIEDERHORN, NORDEND, SNCF01): a common cause outside the station (transmission or reception of the data), not a failure of the station; it is not established. The curves are missing over the range; nothing to do on the station.","analysis":"CLARIDEN_2026-10-11T0000_2026-10-20T0400"}
{"id":"CLARIDEN-58","start":"2026-10-19T20:40Z","end":"2026-10-19T21:30Z","family":"No data","description":"Three measurements are missing in less than an hour, for all sensors: the curves have a gap; normal voltage around it. The same gap falls at the same moment on the other stations measuring at that time (FLORIDA, JUNGFRAU, LENZSPITZE, NIEDERHORN, NORDEND, SNCF01): a common cause outside the station (transmission or reception of the data), not a failure of the station; it is not established. The curves are missing over the range; nothing to do on the station. The hourly metrics of BREITHORN, MICHIGAN and NEBRASKA are also missing at 21:00.","analysis":"CLARIDEN_2026-10-11T0000_2026-10-20T0400"}
{"id":"CLARIDEN-59","start":"2026-10-20T00:10Z","end":"2026-10-20T00:40Z","family":"Displacement","description":"On the 20th, over two measurements, the whole scene, references included, suddenly shifts in the image, mostly vertically: the camera has moved (its tilt jumps). The compensation absorbs most of it, but the corrected curves of several targets jump. Vertically, D-303-C, D-304-C, D-304-B, D-303-B and P-301-B go back up to the level they had before the slow tilting of the camera of the 17th to the 19th (labeled separately): this jump erases its remainder. D-306-B jumps up clearly, beyond its earlier level, and stays there. D-302-B and PR_BG (same prism) jump horizontally and stay there. The recognition error of D-302-B and D-303-B changes level at the same moment. Work lights are visible at the far end of the tunnel on the images of the hour before and the hour after; nothing is in front of the targets. The cause of the camera movement is not established. The lasting jumps of D-306-B and D-302-B are not an established movement of the structure: to be checked; the camera is to be monitored.","analysis":"CLARIDEN_2026-10-11T0000_2026-10-20T0400"}
{"id":"CLARIDEN-2","start":"2026-10-01T06:15Z","end":"2026-10-01T08:45Z","family":"Visibility","description":"The recognition error of most targets rises together, first a little, then clearly around 07:50-08:00, and comes back down; at the same time the corrected curves of several targets make a bump that comes back: D-301-C horizontally, D-302-B and PR_BG (same prism) vertically, D-306-B, D-303-B, P-301-B, then around 08:00 D-301-A, D-302_A, D-304-A. The scene deforms a little (scale and rotation of the targets, references PR-291 and PR-293 moving away from the targets), without camera movement. Nothing on the 07:00 and 08:00 images, which are dark as always. Diffuse obstruction of the view in the tunnel, cause not established (the tunnel air?); same signature as the episodes of 2, 6, 18, 22 and 31 October. The structure does not move: do not trust the curves over the range.","review":"2026-11-17","analysis":"CLARIDEN_2026-10-01T0000_2026-10-11T0000"}
{"id":"CLARIDEN-3","start":"2026-10-01T17:45Z","end":"2026-10-02T02:30Z","family":"Displacement","description":"The low targets of row B go down vertically from 18:00: D-306-B above all, which keeps going down into the night then stays low until the gap of 3 October, D-304-B and D-303-B (which, for its part, gradually rises until the 3rd). Raw positions almost motionless, no camera movement, ordinary recognition error, no image showing a cause. Cause not established, in a tunnel under construction: a movement of these targets is not excluded. To be checked against the other measurements of the site; monitor this row.","review":"2026-11-17","analysis":"CLARIDEN_2026-10-01T0000_2026-10-11T0000"}
{"id":"CLARIDEN-44","start":"2026-10-02T03:40Z","end":"2026-10-03T03:00Z","family":"Displacement","description":"D-303-B comes back up vertically after its descent of the evening of the 1st (labeled separately): first during the morning of the 2nd, then after a pause over the day, again in the evening and the night, until it reaches its level from before the descent in the night of the 2nd to the 3rd, and stays there until the gap of the 3rd. D-306-B and D-304-B, which went down with it, do not come back. Ordinary recognition error, apart from the view obstruction of the evening of the 2nd (labeled separately); nothing on the thumbnails of the 2nd at 12:00 and the 3rd at 08:00. The camera tilt decreases slowly over these days, and D-303-B follows the tilt of the camera only in part (see the 6th and the 8th): this may explain a small part of the rise, not all of it. Cause not established, in a tunnel under construction: return of the descent of the 1st; to be checked with the other measurements of the site.","analysis":"CLARIDEN_2026-10-01T0000_2026-10-11T0000"}
{"id":"CLARIDEN-45","start":"2026-10-02T21:30Z","end":"2026-10-02T23:00Z","family":"Visibility","description":"The recognition error of most targets rises together for one hour, and the corrected curves of D-304-B (vertical) above all, of D-301-C (horizontal), D-302-B and PR_BG, P-301-B, D-304-C make a bump that comes back; D-304-B is still shifted at the last measurement, before 23:00. The camera housing temperature drops clearly at the same time. Nothing visible on the 22:00 image. Diffuse obstruction of the view, cause not established, perhaps a change in the tunnel air. The structure does not move: curves to ignore over the range.","analysis":"CLARIDEN_2026-10-01T0000_2026-10-11T0000"}
{"id":"CLARIDEN-6","start":"2026-10-03T07:40Z","end":"2026-10-03T08:00Z","family":"No data","description":"One measurement is missing, for all sensors: the curves have a short gap. Cause not established.","review":"2026-11-17","analysis":"CLARIDEN_2026-10-01T0000_2026-10-11T0000"}
{"id":"CLARIDEN-46","start":"2026-10-03T09:40Z","end":"2026-10-03T17:00Z","family":"Displacement","description":"P-301-B alone: its vertical corrected curve, a little low since the view obstruction of the evening of the 2nd, jumps up within two measurements around 09:50, together with a clear rise of its own recognition error, stays above its usual level until the early afternoon, then slowly comes back down until the late afternoon. Its raw position moves in the image while the neighbouring targets and the camera stay still; its horizontal curve hardly moves. The thumbnails of 08:00, 12:00 and 16:00 show the same sharp spot, nothing in front. Cause not established: something changes in the appearance or the position of this target only; not an established movement of the structure, to be checked; ignore this curve over the range.","analysis":"CLARIDEN_2026-10-01T0000_2026-10-11T0000"}
{"id":"CLARIDEN-7","start":"2026-10-03T17:30Z","end":"2026-10-03T17:45Z","family":"Visibility","description":"Last measurement before the gap of 3 October: the same one-measurement bump on D-301-C, D-302-B and PR_BG, D-304-B, D-304-C, P-301-B, with the recognition error of many targets rising. Same signature as the episodes of view obstruction at the station; cause not established, perhaps linked to the station shutdown that follows. Point to ignore.","review":"2026-11-17","analysis":"CLARIDEN_2026-10-01T0000_2026-10-11T0000"}
{"id":"CLARIDEN-8","start":"2026-10-03T17:45Z","end":"2026-10-05T10:30Z","family":"No data","description":"No measurement or image for almost two days, for all sensors, and the station metrics are missing too: the entire station stopped. Voltage and battery normal before and after the gap, so not the signature of a power cut; on resumption, the camera has moved and a blurred object is very close to the lens (10:30 image), which suggests an intervention on the station. Cause not established: the curves are missing over the range.","review":"2026-11-17","analysis":"CLARIDEN_2026-10-01T0000_2026-10-11T0000"}
{"id":"CLARIDEN-9","start":"2026-10-03T17:45Z","end":"2026-10-05T10:45Z","family":"Displacement","description":"After the gap of 3 to 5 October, many targets resume at a different level, and do not return to the previous one until the end of the batch: D-304-C and D-303-C above all, in both directions, then D-302_A and D-301-A, P-299-B, D-300-C, D-303-B and D-304-B horizontally, D-301-C vertically; D-306-B, for its part, returns to its level from before its descent of the evening of the 1st. The raw positions of D-304-C and D-303-C have moved in the image relative to the other targets, the recognition error of several targets (D-302-C, D-301-C, D-303-C, D-304-C, D-301-A, D-306-B) also changes level, and the camera scale is no longer the same: the appearance of these targets and the camera pose changed during the shutdown. On resumption, a blurred object is very close to the lens (10:30 image). Cause not established: intervention or changed setting during the shutdown, or real movement; to be checked before trusting these new levels.","review":"2026-11-17","analysis":"CLARIDEN_2026-10-01T0000_2026-10-11T0000"}
{"id":"CLARIDEN-10","start":"2026-10-05T10:30Z","end":"2026-10-05T11:20Z","family":"Obstruction","description":"First measurement after the gap: the whole scene, references included, is shifted by several pixels in the image and the camera is tilted, then it returns within twenty minutes; the compensation absorbs it poorly for the duration of one measurement, and the corrected curves of many targets jump then return (D-303-C, D-302-B and PR_BG, D-306-B, D-304-B, P-299-C above all; D-303-B stays slightly shifted until 11:10). D-304-C is rejected. The 10:30 image shows a large blurred object very close to the lens, on the right, which hides D-304-C, and a worker in reflective clothing in the tunnel, at the top left: work is going on around the camera. Points to ignore; the structure does not move.","review":"2026-11-17","analysis":"CLARIDEN_2026-10-01T0000_2026-10-11T0000"}
{"id":"CLARIDEN-11","start":"2026-10-05T12:10Z","end":"2026-10-05T12:30Z","family":"Obstruction","description":"For the duration of one measurement, the whole right-hand row C (D-300-C, D-301-C, D-303-C, D-304-C, P-298-C, P-299-C) and the reference D-302-C are rejected, their recognition error almost at 1; the compensation runs without D-302-C and the targets that stayed under the threshold jump then return at the next measurement (D-306-B above all vertically, D-303-B, D-304-B, P-299-B, P-301-B, D-302-B and PR_BG). No image at 12:20: the cause is not seen, but the signature is that of something passing in front of the right-hand part of the scene. Point to ignore.","review":"2026-11-17","analysis":"CLARIDEN_2026-10-01T0000_2026-10-11T0000"}
{"id":"CLARIDEN-73","start":"2026-10-06T13:00Z","end":"2026-10-06T13:30Z","family":"Displacement","description":"Around 13:10 the whole scene, references included, shifts by a step vertically in the image: the camera tilt makes a step, which it keeps. The compensation absorbs it for all the targets except D-303-B, whose raw position follows only part of the shift: its vertical corrected curve drops by a step and stays low into the evening (D-303-C and D-304-C at most slightly). Ordinary recognition error. Over the following days, D-303-B keeps following the camera tilt in the same partial way (the drift labeled from the evening of the 6th; the opposite camera step of the 8th leaves it only a remainder within the noise). Cause of the camera step not established; the step of D-303-B is the remainder of the camera movement, not a movement of the structure: the camera is to be monitored.","analysis":"CLARIDEN_2026-10-01T0000_2026-10-11T0000"}
{"id":"CLARIDEN-12","start":"2026-10-06T18:00Z","end":"2026-10-06T22:10Z","family":"Visibility","description":"For four hours, the corrected curves of the same group of targets take a step that starts and ends sharply: D-301-C horizontally above all, D-302-B and PR_BG (same prism) horizontally then vertically, D-304-B vertically, and at times P-301-B, D-303-B, D-302_A, D-301-A, D-304-C. The recognition error of the references PR-293, PR-295, PR-296 and of a few targets rises a little; the references move away from each other in the image. The camera housing temperature drops clearly over these hours. Nothing visible on the 20:00 image. View obstruction of cause not established, probably the tunnel air (colder); the curves and the recognition error return at 22:00, before the camera scale. The structure does not move: curves to ignore over the range.","analysis":"CLARIDEN_2026-10-01T0000_2026-10-11T0000"}
{"id":"CLARIDEN-23","start":"2026-10-20T04:00Z","end":"2026-10-25T18:00Z","family":"Displacement","description":"Slow drift of targets of row C, then stabilization at a new level: D-301-C rises horizontally from the 20th, D-304-C and D-303-C rise vertically mostly from the 22nd. No camera movement, ordinary recognition error. The rise of D-301-C starts before the work seen around the station on the 22nd (workers and a frame): no link established. The position in the image of D-301-C, D-304-C and D-303-C moves clearly away from that of the other targets, in the direction of their curves. The camera housing temperature stays almost constant over these days: no link with it. Partial return from the 26th to the 29th, labeled separately. Cause not established, in a tunnel under construction: a movement of these targets is not excluded. To be checked against the other measurements of the site; monitor this row.","review":"2026-11-17","analysis":"CLARIDEN_2026-10-20T0400_2026-11-01T0010"}
{"id":"CLARIDEN-24","start":"2026-10-20T06:10Z","end":"2026-10-20T06:30Z","family":"No data","description":"One measurement is missing, for all sensors: the curves have a short gap; the station nevertheless synchronizes at that moment, normal voltage. The same moment is also missing at LENZSPITZE, and at no other station: a common cause outside the station is possible, not established. Nothing to do.","review":"2026-11-17","analysis":"CLARIDEN_2026-10-20T0400_2026-11-01T0010"}
{"id":"CLARIDEN-60","start":"2026-10-20T20:40Z","end":"2026-10-20T21:40Z","family":"No data","description":"Five measurements are missing within one hour, for all sensors: the curves have a gap. The station is nevertheless running (continuous synchronizations, 21:00 image, normal voltage): the measurement is not made or not recorded. The 21:00 measurement is also missing at NIEDERHORN, and at no other station: a common cause is possible, not established. Nothing to do.","analysis":"CLARIDEN_2026-10-20T0400_2026-11-01T0010"}
{"id":"CLARIDEN-61","start":"2026-10-22T06:30Z","end":"2026-10-22T08:50Z","family":"Visibility","description":"In two phases, from 06:40 to 06:50 then from 07:50 to 08:30, the recognition error of several targets and of the references D-302-C and PR-293 rises, and the corrected curves of the usual group make a bump that comes back: D-301-C horizontally, D-302-B and PR_BG vertically, P-301-B, D-304-B, D-304-C, and at the start D-302_A, P-298-A, D-304-A, D-303-A; between the two, D-302-B and PR_BG move once more. The camera housing temperature drops during these hours. The 08:00 image shows lights at the far end of the tunnel (machine or vehicle), nothing in front of the targets. Diffuse view obstruction of cause not established, the same as in the other episodes at the station. Curves to ignore over the range; the structure does not move.","analysis":"CLARIDEN_2026-10-20T0400_2026-11-01T0010"}
{"id":"CLARIDEN-62","start":"2026-10-22T08:50Z","end":"2026-10-22T17:00Z","family":"Displacement","description":"The low targets of row B rise vertically during the day: D-306-B above all, D-302-B and PR_BG, D-304-B, D-303-B; the recognition error of a few of them rises a little. Workers are visible in the tunnel on the 12:00 image, and a frame appears very close to the camera at the top of the image at 13:00 (it stays there until the end of the batch): work around the station. The position in the image of D-306-B rises a little relative to the other targets, in the direction of its curve. The link between this work and the rise is not established. Evening descent, labeled separately. Cause not established, in a tunnel under construction: a movement of these targets is not excluded. To be checked against the other measurements of the site; monitor this row.","analysis":"CLARIDEN_2026-10-20T0400_2026-11-01T0010"}
{"id":"CLARIDEN-29","start":"2026-10-22T17:00Z","end":"2026-10-23T10:30Z","family":"Displacement","description":"The low targets of row B go back down vertically, all at once on the evening of the 22nd then more slowly on the morning of the 23rd, to below their level from before their rise of the day: D-306-B above all, D-304-B, D-303-B, D-302-B and PR_BG. No camera movement; the frame installed on the 22nd stays at the top of the image (19:00 image), nothing else. The position in the image of D-306-B also goes down relative to the other targets. This is the return of the rise of the day, labeled separately, and it goes beyond it. Cause not established, in a tunnel under construction: a movement of these targets is not excluded. To be checked against the other measurements of the site; monitor this row.","review":"2026-11-17","analysis":"CLARIDEN_2026-10-20T0400_2026-11-01T0010"}
{"id":"CLARIDEN-30","start":"2026-10-24T01:00Z","end":"2026-10-24T05:00Z","family":"Displacement","description":"The low targets of row B (D-306-B above all, D-304-B, D-303-B) partly rise again vertically in the night of the 24th, toward their level from before the descent of the evening of the 22nd, without reaching it. No camera movement. Cause not established, in a tunnel under construction: a movement of these targets is not excluded. To be checked against the other measurements of the site; monitor this row.","review":"2026-11-17","analysis":"CLARIDEN_2026-10-20T0400_2026-11-01T0010"}
{"id":"CLARIDEN-31","start":"2026-10-24T18:20Z","end":"2026-10-25T19:10Z","family":"Displacement","description":"The left targets of row A (D-302_A, D-303-A, D-304-A, D-301-A, P-299-A) and D-304-B, D-306-B, P-301-B fidget in jolts (around 18:30 and 21:30 on the 24th, 07:00 and 15:30 on the 25th): the vertical rises, the horizontal goes down; the recognition error of these targets and of the reference D-302-C rises during the first jolts, and the references PR-291 and PR-293 move slightly away from the targets in the image. Everything calms down on the evening of the 25th. After the agitation, the horizontal of the A targets stays shifted until the end of the batch. Workers are visible on the image of the 24th at 15:00 and the frame is still at the top of the image. Cause not established: shift to be checked.","review":"2026-11-17","analysis":"CLARIDEN_2026-10-20T0400_2026-11-01T0010"}
{"id":"CLARIDEN-32","start":"2026-10-25T18:00Z","end":"2026-10-29T04:00Z","family":"Displacement","description":"After their rise of the 20th to the 25th, D-304-C and D-303-C slowly go back down vertically from the 26th to the 29th, without returning to their level from before the rise, then stabilize. No camera movement, nothing in front of the targets on the images of the 28th at 19:00 and 20:00. Their position in the image also partly returns toward that of the other targets. This is the partial return of the rise of the 20th to the 25th, labeled separately. Cause not established, in a tunnel under construction: a movement of these targets is not excluded. To be checked against the other measurements of the site; monitor this row.","review":"2026-11-17","analysis":"CLARIDEN_2026-10-20T0400_2026-11-01T0010"}
{"id":"CLARIDEN-63","start":"2026-10-25T19:10Z","end":"2026-10-29T04:00Z","family":"Displacement","description":"After their rise in jolts of the 24th and 25th, the left targets of row A slowly go back down vertically from the 26th to the 29th, back to about their level from before the jolts: D-304-A, D-303-A, D-302_A and D-301-A above all, P-299-A and P-298-A less; their horizontal stays shifted. Their position in the image comes back with their curves, relative to the other targets; no camera step, ordinary recognition error. Same dates as the partial return of D-304-C and D-303-C, labeled separately. This is the return of the agitation of the 24th and 25th, labeled separately. Cause not established, in a tunnel under construction: a movement of these targets is not excluded. To be checked against the other measurements of the site; monitor this row.","analysis":"CLARIDEN_2026-10-20T0400_2026-11-01T0010"}
{"id":"CLARIDEN-64","start":"2026-10-26T14:30Z","end":"2026-10-26T15:10Z","family":"No data","description":"Three measurements are missing in less than an hour, for all sensors: the curves have a gap; normal voltage around it. The same gap falls at the same moment on the other stations measuring at that time (FLORIDA, JUNGFRAU, LENZSPITZE, NIEDERHORN, NORDEND, SNCF01), and their metrics are also missing at the same minutes: a common cause outside the station (transmission or reception of the data), not a failure of the station; it is not established. The curves are missing over the range; nothing to do on the station. The hourly metrics of BREITHORN, MICHIGAN and NEBRASKA are also missing at 15:00.","analysis":"CLARIDEN_2026-10-20T0400_2026-11-01T0010"}
{"id":"CLARIDEN-34","start":"2026-10-27T09:00Z","end":"2026-10-27T09:30Z","family":"No data","description":"Two measurements are missing, for all sensors: the curves have a short gap; normal voltage around it. The same gap falls at the same moment on the other stations measuring at that time (FLORIDA, JUNGFRAU, LENZSPITZE, NORDEND): a common cause outside the station (transmission or reception of the data), not a failure of the station; it is not established. The curves are missing over the range; nothing to do on the station.","review":"2026-11-17","analysis":"CLARIDEN_2026-10-20T0400_2026-11-01T0010"}
{"id":"CLARIDEN-35","start":"2026-10-27T12:00Z","end":"2026-10-27T12:20Z","family":"Target issue","description":"For the duration of one measurement, the target PR-284 jumps by several pixels horizontally and vertically, then returns: the measured position has left its spot, with a high recognition error but under the threshold, so kept in the curve. Since 24 October around 14:20, the spot of PR-284 is clearly weaker (thumbnails of the 24th at 12:00 and 16:00, of the 27th at 12:00) and its recognition error has stayed high. False point to ignore; look at the state of the target PR-284 if the false points repeat.","review":"2026-11-17","analysis":"CLARIDEN_2026-10-20T0400_2026-11-01T0010"}
{"id":"CLARIDEN-36","start":"2026-10-28T19:20Z","end":"2026-10-28T20:10Z","family":"Displacement","description":"On the evening of the 28th, the low targets of row B go down by a step vertically, D-306-B above all, then D-304-B, and stay at this new level until the end of the batch; D-303-B and D-304-B also go down a little horizontally. The position in the image of D-306-B goes down a little relative to the other targets, no camera movement, nothing on the 19:00 and 20:00 images (the frame at the top of the image is still there). Cause not established, in a tunnel under construction: a movement of these targets is not excluded. To be checked against the other measurements of the site; monitor this row.","review":"2026-11-17","analysis":"CLARIDEN_2026-10-20T0400_2026-11-01T0010"}
{"id":"CLARIDEN-37","start":"2026-10-29T14:50Z","end":"2026-10-29T15:10Z","family":"No data","description":"One measurement is missing, for all sensors: the curves have a short gap; the station nevertheless synchronizes at that moment, normal voltage. The same gap falls at the same moment on the other stations measuring at that time (LENZSPITZE, NORDEND, SNCF01): a common cause outside the station (transmission or reception of the data), not a failure of the station; it is not established. The curves are missing over the range; nothing to do on the station.","review":"2026-11-17","analysis":"CLARIDEN_2026-10-20T0400_2026-11-01T0010"}
{"id":"CLARIDEN-65","start":"2026-10-29T23:50Z","end":"2026-10-30T00:10Z","family":"Target issue","description":"At midnight, D-302-B jumps vertically and a little horizontally and stays at this new level until the end of the batch; PR_BG, on the same prism, jumps in the opposite direction. The raw positions of the two sensors do not move, only their starting position has changed (the relative displacement jumps without any movement in the image): a configuration or processing change of these two sensors, not a movement of the structure. Check their configuration with the operator; do not read this jump as a movement, nor compare their curves before and after.","analysis":"CLARIDEN_2026-10-20T0400_2026-11-01T0010"}
{"id":"CLARIDEN-66","start":"2026-10-30T17:00Z","end":"2026-10-30T17:50Z","family":"No data","description":"Four measurements are missing in less than an hour, for all sensors: the curves have a gap. The station's own record stops too: its minute-by-minute synchronizations are missing over the same half hour, while the 17:00 image exists and the voltage stays normal before and after, so it is not a lack of energy. The other stations measuring at that time (ALASKA, FLORIDA, JUNGFRAU, LENZSPITZE, NADELHORN, NORDEND, SNCF01, WYOMING) have their measurements: the cause is specific to the station, not established. The curves are missing over the range; nothing to do unless it repeats.","analysis":"CLARIDEN_2026-10-20T0400_2026-11-01T0010"}
{"id":"CLARIDEN-68","start":"2026-10-31T09:20Z","end":"2026-10-31T15:00Z","family":"Thermal displacement","description":"The camera housing temperature rises a little in the late morning of the 31st, and the camera scale rises with it while the pan goes down, until early afternoon; they come back when the housing cools, mostly during the view obstruction of the early afternoon, labeled separately. The compensation absorbs most of it, but a few corrected curves follow a little over these hours and come back with it: D-301-C horizontally, D-304-C, D-303-C and D-304-B vertically. Only a light at the far end of the tunnel on the 12:00 image, nothing in front of the targets. Camera movement by thermal effect, deduced from its pose against the housing temperature; normal, nothing to do.","analysis":"CLARIDEN_2026-10-20T0400_2026-11-01T0010"}
{"id":"CLARIDEN-69","start":"2026-10-31T13:50Z","end":"2026-10-31T15:10Z","family":"Visibility","description":"For one hour, the corrected curves of the usual group make a bump that comes back: D-301-C (horizontal), D-302-B and PR_BG (vertical), D-301-A, D-300-A, D-304-B, D-304-C, D-302_A, and for a moment the reference PR-295; the recognition error of a few sensors rises during the episode. Same signature as the other episodes of view obstruction at the station; cause not established. Curves to ignore over the range.","analysis":"CLARIDEN_2026-10-20T0400_2026-11-01T0010"}
{"id":"CLARIDEN-70","start":"2026-10-31T18:40Z","end":"2026-10-31T20:00Z","family":"Visibility","description":"For the duration of a few measurements, the corrected curves of D-301-C, P-301-B, P-299-A, D-302-B and PR_BG, D-303-B make a bump that comes back, and the reference PR-295, which is seen less well from 18:50, leaves its level; it is rejected at 19:50 (its curve is missing at that measurement), without the targets moving because of it. View obstruction of cause not established; points to ignore.","analysis":"CLARIDEN_2026-10-20T0400_2026-11-01T0010"}
{"id":"CLARIDEN-71","start":"2026-10-31T22:20Z","end":"2026-11-01T00:00Z","family":"Visibility","description":"The reference PR-295 is seen poorly: its spot is weaker (23:00 thumbnail), it is rejected at times and, between two rejections, it is poorly measured; the compensation changes basis, and at 22:50 many targets jump together then return, without any movement of their raw positions. Until 23:50, the curves of D-301-C, P-301-B, D-302-B and PR_BG stay shifted, then briefly cross to the other side, with the recognition error of several targets rising. The camera housing temperature drops clearly at that hour. Cause of the obstruction not established (same signature as the other episodes). The jumps are not a movement: curves to ignore over the range.","analysis":"CLARIDEN_2026-10-20T0400_2026-11-01T0010"}