Files
2026-11-18 10:51:31 +01:00

25 lines
25 KiB
JSON

{"id": "BREITHORN-43", "start": "2026-10-03T00:00Z", "end": "2026-10-13T04:00Z", "family": "Displacement", "description": "From the start of the data to 13 October, the targets drift slowly and steadily with the camera pose, step by step, as the camera gradually tilts (tilt increasing, pan and rotation decreasing): COLJ19 and POUI19 the most, mostly in corr_x (POUI19 hardly in corr_y), COLH20, COLI20, COLI21 and POUI20 in the same direction, in corr_x and corr_y; COLI24 and POUI22 drift in the opposite direction in corr_y. Their position in the image hardly moves apart from the camera movement and their error_value stays stable. Cause given by the expert: the camera is nodding forward and the compensation of its movement is not complete. Deduced from the distances of the targets to the camera: the drift of each target grows as it is closer, a parallax. COLJ19 and POUI19, the nearest according to the expert and to their distances, drift the most; the targets at middle distance (COLH20, COLI20, POUI20) less; POUH21, at the distance of the references, does not drift; the farthest (COLI24, POUI22) go the other way in corr_y. As it nods, the camera does not only turn, it also shifts a little; a shift moves near targets much more in the image than far ones, and the compensation, fitted on references at middle distance, corrects only the targets at their distance: those nearer keep a remainder in one direction, those farther in the other. The parallax explains most of the drift, not all of it: COLI21, which drifts as much as targets much nearer, COLH20''' in corr_x, and the corr_y of COLI24 and POUI22, stronger than the parallax gives, remain not established. The temperature of the camera housing drops slightly over the range, link not established. According to the expert, BREITHORN, MICHIGAN and NEBRASKA are in the same building: the cameras of the three stations tilt together, in the same direction and on the same dates (advance until 12 October, stop and slight backward movement from 13 to 16, resumption from the 17th to the end of the month), which points to a cause common to the building rather than a fault of this camera alone; at equal housing temperature, the cameras are more tilted at the end of the month than in the middle: temperature does not explain it alone, link not established. For the customer: this is not a movement of the structure, the targets keep their places relative to each other and only their view from a camera that shifts changes; the camera tilt is to be monitored.", "review": "2026-11-18", "analysis": "BREITHORN_2026-10-03T0000_2026-11-01T0000"}
{"id": "BREITHORN-44", "start": "2026-10-16T20:00Z", "end": "2026-11-01T00:00Z", "family": "Displacement", "description": "From 17 October to the end of the batch, the drift resumes, faster than at the beginning of the month until the 25th, then clearly slower without stopping: the camera tilts again (tilt increasing, pan and rotation decreasing) and the targets drift with it: POUI19 and COLJ19 the most, mostly in corr_x (POUI19 hardly in corr_y), COLI20, COLI21, COLH20 and POUI20 in the same direction, in corr_x and corr_y; COLI24 and POUI22 drift in the opposite direction in corr_y; COLI22, COLH20''' and POUI24 drift too, more noisily, between their own rejections. Their position in the image hardly moves apart from the camera movement and their error_value stays stable. Cause given by the expert: the camera is nodding forward and the compensation of its movement is not complete. Deduced from the distances of the targets to the camera: the drift of each target grows as it is closer, a parallax. COLJ19 and POUI19, the nearest according to the expert and to their distances, drift the most; the targets at middle distance (COLH20, COLI20, POUI20) less; POUH21, at the distance of the references, does not drift; the farthest (COLI24, POUI22) go the other way in corr_y. As it nods, the camera does not only turn, it also shifts a little; a shift moves near targets much more in the image than far ones, and the compensation, fitted on references at middle distance, corrects only the targets at their distance: those nearer keep a remainder in one direction, those farther in the other. The parallax explains most of the drift, not all of it: COLI21, which drifts as much as targets much nearer, COLH20''' in corr_x, and the corr_y of COLI24 and POUI22, stronger than the parallax gives, remain not established. The resumption coincides with the drop in the camera housing temperature, but the drift does not come back when it rises: link not established. According to the expert, BREITHORN, MICHIGAN and NEBRASKA are in the same building: the cameras of the three stations tilt together, in the same direction and on the same dates (advance until 12 October, stop and slight backward movement from 13 to 16, resumption from the 17th to the end of the month), which points to a cause common to the building rather than a fault of this camera alone; at equal housing temperature, the cameras are more tilted at the end of the month than in the middle: temperature does not explain it alone, link not established. For the customer: this is not a movement of the structure, the targets keep their places relative to each other and only their view from a camera that shifts changes; the camera tilt is to be monitored.", "review": "2026-11-18", "analysis": "BREITHORN_2026-10-03T0000_2026-11-01T0000"}
{"id": "BREITHORN-42", "start": "2026-10-03T00:00Z", "end": "2026-10-04T20:00Z", "family": "Obstruction", "description": "From the morning of 3 October to the late afternoon of 4 October, the reference REFPOU22 is rejected together with the targets COLH20''' and POUI22: on the thumbnails and the images of those hours, the three spots are hidden behind an object with light reflections in vertical bands, a vehicle parked in front of the bottom of the scene. With one reference fewer, the compensation runs on the three others, and the corr_x of the reference REFH22 shifts clearly beyond its noise as soon as REFPOU22 is lost, stays shifted for the whole parking, then comes back to its level at the evening measurement of the 4th, when the three spots return without offset. The other targets keep their level within the noise. A change of the compensation basis caused by the hidden reference, not a movement: the structure does not move, nothing to do.", "review": "2026-11-18", "analysis": "BREITHORN_2026-10-03T0000_2026-10-13T0000"}
{"id": "BREITHORN-3", "start": "2026-10-04T12:00Z", "end": "2026-10-04T20:00Z", "family": "Obstruction", "description": "For the duration of one measurement, on 4 October in the late afternoon, all the targets jump together in corr_x and in corr_y, then return at the next measurement. At that measurement, POUI24 is rejected in turn (curve absent), COLI22 jumps clearly in corr_y, and the reference REFH22, half hidden, rises clearly in error_value without being discarded, which distorts the basis of all the targets; COLH20''', POUI22 and REFPOU22 remain hidden by the vehicle parked since the day before. On the image of that hour, the banded reflections have disappeared and a light shines under POUI22: the obstacle has changed position in front of the bottom of the scene. The jumps are not a movement: point to ignore, nothing to do.", "review": "2026-11-17", "analysis": "BREITHORN_2026-10-03T0000_2026-10-13T0000"}
{"id": "BREITHORN-29", "start": "2026-10-05T00:00Z", "end": "2026-10-05T12:00Z", "family": "Thermal displacement", "description": "On 5 October in the morning, over two measurements, the camera scale and rotation deviate, then return at noon; at the same time the reference REFPOU22 and COLH20 rise clearly in corr_y while the references REFG44N and REFI'21 go down, then everything returns at noon. The images of 08:00 and 16:00 are alike, nothing obstructs the view; the error_value change little (the reference REFG44N rises a little, far from its threshold). This falls at the trough of the camera housing temperature, read in the metrics, and comes back when it rises: the same signature as the reviewed cold mornings of later in October. Thermal effect on the camera, incompletely compensated, according to the expert it is the housing temperature that matters, not the air temperature. Nothing to fear for the structure, nothing to do; do not trust these points.", "review": "2026-11-18", "analysis": "BREITHORN_2026-10-03T0000_2026-10-13T0000"}
{"id": "BREITHORN-30", "start": "2026-10-05T20:00Z", "end": "2026-10-06T12:00Z", "family": "Thermal displacement", "description": "From midnight to the morning of 6 October, over three measurements, the camera scale and rotation deviate, most at 08:00, then return at noon; the reference REFPOU22 and COLH20 rise clearly in corr_y, the references REFG44N and REFI'21 go down a little, then everything returns at noon. Nothing obstructs the targets on the 08:00 image (only a small light at the far left of the scene, away from the spots); the error_value change little. This falls when the camera housing temperature drops, read in the metrics, and comes back when it rises: the same signature as the reviewed cold mornings of later in October. Thermal effect on the camera, incompletely compensated, according to the expert it is the housing temperature that matters. Nothing to fear for the structure, nothing to do; do not trust these points.", "review": "2026-11-18", "analysis": "BREITHORN_2026-10-03T0000_2026-10-13T0000"}
{"id": "BREITHORN-5", "start": "2026-10-07T08:00Z", "end": "2026-10-07T16:00Z", "family": "Obstruction", "description": "For the duration of one measurement, on 7 October at noon, the reference REFI'21 is rejected: on the image, a vehicle with reflective strips passes on the left of the scene and hides the group of REFI'21. The compensation runs on three references, the basis changes: several targets (POUI19, COLJ19, COLI20, COLI22, COLI24, POUI24) jump a little, mostly in corr_y, then return at the next measurement. This is not a movement: point to ignore.", "review": "2026-11-17", "analysis": "BREITHORN_2026-10-03T0000_2026-10-13T0000"}
{"id": "BREITHORN-6", "start": "2026-10-07T16:00Z", "end": "2026-10-08T04:00Z", "family": "Obstruction", "description": "On the night of 7 to 8 October, COLI24 is rejected from the evening, then COLI22 and POUI22 too around midnight (curves absent); POUI22 jumps in the evening and POUI24, half hidden, jumps clearly in corr_y around midnight. On the thumbnails, these spots are hidden or reduced, and a vehicle is visible in front of the bottom of the scene. Everything comes back in the morning. The structure does not move: ignore these targets over the range.", "review": "2026-11-17", "analysis": "BREITHORN_2026-10-03T0000_2026-10-13T0000"}
{"id": "BREITHORN-7", "start": "2026-10-08T20:00Z", "end": "2026-10-09T08:00Z", "family": "Obstruction", "description": "On the night of 8 to 9 October, the curves of COLI22, COLI24 and POUI22 are missing (measurements rejected) and the reference REFH22 is rejected too; POUI24, half hidden, jumps in corr_x and in corr_y. On the thumbnails, these spots are hidden and a parked vehicle is visible in front of the bottom of the scene, the image veiled by its light. The compensation runs on three references without making the other targets jump. Everything comes back in the morning: ignore these targets over the range, the structure does not move.", "review": "2026-11-17", "analysis": "BREITHORN_2026-10-03T0000_2026-10-13T0000"}
{"id": "BREITHORN-9", "start": "2026-10-10T00:00Z", "end": "2026-10-10T08:00Z", "family": "Obstruction", "description": "For the duration of one measurement, on 10 October in the morning, all the targets jump together, mostly in corr_y, then return at the next measurement; COLI22, COLI24, POUI22 and POUI24 are rejected (curves absent). On the image of that hour, a vehicle is in front of the bottom of the scene, these spots are hidden and the whole image is veiled by its light; the reference REFH22, hampered, rises clearly in error_value without being discarded, which distorts the basis of all the targets. This is not a movement: point to ignore.", "review": "2026-11-17", "analysis": "BREITHORN_2026-10-03T0000_2026-10-13T0000"}
{"id": "BREITHORN-10", "start": "2026-10-13T00:00Z", "end": "2026-10-13T08:00Z", "family": "Obstruction", "description": "For the duration of one measurement, on 13 October in the morning, COLH20''' and COLI24 are rejected (curves absent) and POUI24, POUI22 and COLI22, partly hidden, jump in corr_x or in corr_y; everything returns at the next measurement. On the image of that hour, a car with its headlights on is in front of the bottom of the scene. The references hold. Point to ignore, the structure does not move.", "review": "2026-11-17", "analysis": "BREITHORN_2026-10-13T0000_2026-10-22T1600"}
{"id": "BREITHORN-39", "start": "2026-10-13T04:00Z", "end": "2026-10-16T20:00Z", "family": "Displacement", "description": "From 13 to 16 October, the slow drift stops and goes back a little: the camera straightens slightly (tilt decreasing, rotation rising), and the same targets, COLJ19, POUI19, COLI20, COLI21, POUI20 and COLH20, partly come back in corr_x, POUI19 most of all; it turns on the afternoon of 16 October, when the drift resumes (labelled apart). Cause according to the expert: parallax. Some targets are a few metres from the camera, others and the references several times farther; when the camera nods, its optical centre moves a little and the near targets shift more in the image than the far ones, while the compensation, a single image transformation fitted on the far references, treats all points as if they were at the same distance: the near targets are not fully corrected and seem to drift, the nearest the most. This is seen on the image: COLJ19 and POUI19, which drift the most, have very large blurred spots, COLI20, COLI21 and POUI20 large spots with a halo, the mark of targets close to the camera, out of focus; the references, POUH21, which does not drift, and the bottom targets have small sharp spots. COLH20 drifts although its spot is small: for it, the reason is not established. Their position in the image relative to each other hardly moves, their error_value stays stable. According to the expert, BREITHORN, MICHIGAN and NEBRASKA are in the same building: the cameras of MICHIGAN and NEBRASKA stop and move back on the same days; the return falls on days when the camera housing temperature no longer drops, link not established. For the customer: this is not a movement of the structure but an artifact of the compensation on the near targets; the camera tilt is to be monitored.", "review": "2026-11-18", "analysis": "BREITHORN_2026-10-13T0000_2026-10-22T1600"}
{"id": "BREITHORN-12", "start": "2026-10-15T20:00Z", "end": "2026-10-16T12:00Z", "family": "No data", "description": "No measurement for any sensor during three acquisitions, in the night of 15 to 16 October, and no image; the curves then resume at the level they had before. The station was powered: full battery and normal voltage in the metrics until the early morning; the metrics are then missing for a few hours, then everything returns. The same gap affects the two other stations of the building (MICHIGAN, NEBRASKA, in the same building according to the expert), but also all the other stations. The gap starts at the same time, around 23:00, on the nine stations that were measuring then (LENZSPITZE only has its first measurements in the middle of that night, WILDSTRUBEL is already stopped), and their metrics stop at the same time on most of them; measurements and metrics resume at different times depending on the station, most of them in late morning. JUNGFRAU, whose metrics continue, accumulates unsent entries all night, sent in late morning, and yet its measurements for the night are missing from the data: a common cause outside the stations (transmission or reception of the data), not a shutdown of the stations; it is not established. The cause is therefore not specific to the building. The curves are missing over the range; nothing to do on the station if it does not repeat.", "review": "2026-11-17", "analysis": "BREITHORN_2026-10-13T0000_2026-10-22T1600"}
{"id": "BREITHORN-14", "start": "2026-10-19T00:00Z", "end": "2026-10-19T12:00Z", "family": "Thermal displacement", "description": "On 19 October in the morning, over two measurements, the camera rotation and scale suddenly deviate and its tilt takes a step; several targets deviate at the same time in opposite directions (COLH20 and the reference REFPOU22 upward in corr_y, COLI21 downward in corr_x and in corr_y), then return at noon. Nothing obstructs the view on the images, the error_value change little: this is the camera movement, incompletely compensated. It falls at the trough of the camera housing temperature, read in the metrics, and comes back when it rises: thermal effect on the camera, according to the expert: it is the housing temperature that matters, not the air temperature. Nothing to fear for the structure, nothing to do; do not trust these two points.", "review": "2026-11-17", "analysis": "BREITHORN_2026-10-13T0000_2026-10-22T1600"}
{"id": "BREITHORN-41", "start": "2026-10-21T16:00Z", "end": "2026-10-22T08:00Z", "family": "Obstruction", "description": "On the night of 21 to 22 October, COLI22, partly hidden, and POUI22 deviate clearly in corr_x and in corr_y, far beyond their ordinary noise, for three measurements, then return in the morning; COLI24, next to them, is rejected over the same measurements. On the 20:00 UTC image, the cab of a parked vehicle is in front of these bottom-left targets and the spot of COLI24 is no longer visible; the image of the morning is clear again. The references and the other targets hold. Seen on the image: a parked vehicle hides the targets. The structure does not move: ignore these targets over the range.", "review": "2026-11-18", "analysis": "BREITHORN_2026-10-13T0000_2026-10-22T1600"}
{"id": "BREITHORN-32", "start": "2026-10-22T16:00Z", "end": "2026-10-23T08:00Z", "family": "Obstruction", "description": "On the night of 22 to 23 October, the curve of COLI24 is missing (measurements rejected); COLI22, partly hidden and kept under its threshold, goes down clearly in corr_y and in corr_x, and POUI22 deviates a little in corr_x and, at the first measurement of the night, in corr_y. Seen on the contrast-stretched thumbnails of 20:00 and 04:00 UTC: the dark outline of a vehicle, lights off, stands in front of the bottom left of the scene, where the cars of the other nights park; the spot of COLI24 is hidden and that of COLI22 reduced. The references and the other targets do not move. Everything comes back in the morning, the vehicle gone on the 08:00 image. The structure does not move: ignore these targets over the range.", "review": "2026-11-18", "analysis": "BREITHORN_2026-10-22T1600_2026-11-01T0000"}
{"id": "BREITHORN-18", "start": "2026-10-23T16:00Z", "end": "2026-10-24T16:00Z", "family": "Obstruction", "description": "From the evening of 23 October to noon on 24 October, a car is parked in front of the bottom of the scene, seen on the images (grille and headlight, then headlights on). The curve of COLI24 is missing throughout; COLI22, first partly hidden, makes a very large jump in corr_x (its measured center slides over the visible part of its spot) and POUI22 jumps in corr_x, then COLI22, POUI22 and POUI24 are rejected on the morning of the 24th. The references hold. The structure does not move: ignore these targets over the range.", "review": "2026-11-17", "analysis": "BREITHORN_2026-10-22T1600_2026-11-01T0000"}
{"id": "BREITHORN-20", "start": "2026-10-25T20:00Z", "end": "2026-10-26T08:00Z", "family": "Obstruction", "description": "On the night of 25 to 26 October, an oblique structure, seen on the images in front of the bottom of the scene, hides the references REFH22 and REFPOU22, and COLH20''', COLI22 and POUI24 (measurements rejected, curves absent); POUI22, partly hidden, jumps in corr_x and in corr_y. The compensation only runs on two references: the basis changes, several targets (COLI20, POUI20, POUH21, COLJ19) shift a little in corr_x. Very bad sign for the measurement: data of the range not to be trusted; everything comes back in the morning.", "review": "2026-11-17", "analysis": "BREITHORN_2026-10-22T1600_2026-11-01T0000"}
{"id": "BREITHORN-33", "start": "2026-10-26T12:00Z", "end": "2026-10-26T20:00Z", "family": "Obstruction", "description": "On the evening of 26 October, a car with its headlights on, seen on the 16:00 UTC image, is parked in front of the bottom of the scene: the reference REFH22 is rejected and the compensation runs on three references; the curves of COLI24 and POUI24 are missing, and POUI22, partly hidden and kept under its threshold, makes a very large jump in corr_y and a jump in corr_x. COLI22 and COLH20 shift a little, through the change of references. The car is gone on the 20:00 image, where the oblique structure of the night takes over (labelled apart). The structure does not move: ignore these targets over the range.", "review": "2026-11-18", "analysis": "BREITHORN_2026-10-22T1600_2026-11-01T0000"}
{"id": "BREITHORN-34", "start": "2026-10-26T16:00Z", "end": "2026-10-27T08:00Z", "family": "Obstruction", "description": "On the night of 26 to 27 October, an oblique structure, seen on the images of 20:00 and 00:00 UTC in front of the bottom of the scene, follows the car of the evening (labelled apart). At 20:00 it hides the reference REFH22, COLI24 and POUI22 (measurements rejected, curves absent) and POUI24, partly hidden, jumps strongly in corr_x; at 00:00 and 04:00 it hides the reference REFPOU22, COLH20''' and still POUI22. The compensation runs on three references: REFG44N and REFI'21 shift a little in corr_x, the targets hardly. Everything comes back in the morning, the view clear on the 08:00 image. Ignore these targets over the range; the structure does not move.", "review": "2026-11-18", "analysis": "BREITHORN_2026-10-22T1600_2026-11-01T0000"}
{"id": "BREITHORN-24", "start": "2026-10-28T00:00Z", "end": "2026-10-28T12:00Z", "family": "Thermal displacement", "description": "On 28 October in the morning, over two measurements, the camera rotation and scale deviate then return at noon; at the same time, several targets deviate in opposite directions in corr_y (COLH20, COLI24, POUI22 and the reference REFPOU22 upward, POUI24 and the references REFG44N and REFI'21 downward), and return with the camera. Nothing obstructs the view on the images: this is the camera movement, incompletely compensated. It falls at the trough of the camera housing temperature, read in the metrics, and comes back when it rises: thermal effect on the camera, according to the expert: it is the housing temperature that matters, not the air temperature. Nothing to fear for the structure, nothing to do; do not trust these points.", "review": "2026-11-17", "analysis": "BREITHORN_2026-10-22T1600_2026-11-01T0000"}
{"id": "BREITHORN-35", "start": "2026-10-28T16:00Z", "end": "2026-10-29T16:00Z", "family": "Thermal displacement", "description": "From the evening of 28 October to noon on the 29th, the camera rotation and scale deviate again, for longer and more strongly, then return in the afternoon; several targets deviate with it in opposite directions in corr_y (COLH20, COLI24, POUI22 and the reference REFPOU22 upward; COLI21, COLH20''', POUI24 and the references REFG44N, REFI'21 and REFH22 downward), COLI22 goes down in corr_x, and at the last cold measurement POUI24 and POUH21 jump in corr_x; everything returns in the afternoon. The error_value rise a little on REFH22, COLH20 and COLH20''', without rejection. Nothing obstructs the view on the images, and the spots of POUI24 and POUH21 are in place at their jump: this is the camera movement, incompletely compensated. It follows the coldest night of the batch for the camera housing, read in the metrics, and comes back when it warms up: thermal effect on the camera, according to the expert: it is the housing temperature that matters, not the air temperature. Nothing to fear for the structure, nothing to do; do not trust these points.", "review": "2026-11-18", "analysis": "BREITHORN_2026-10-22T1600_2026-11-01T0000"}
{"id": "BREITHORN-26", "start": "2026-10-29T16:00Z", "end": "2026-10-30T04:00Z", "family": "Obstruction", "description": "On the night of 29 to 30 October, a car with a headlight on, seen on the images, is parked in front of the bottom of the scene: the curve of COLI24 is missing (measurements rejected); POUI22 makes a large jump in corr_x, COLH20''' jumps in corr_x then in corr_y, COLI22 deviates a little, all partly hidden; they return in the morning. The references hold. Ignore these targets over the range, the structure does not move.", "review": "2026-11-17", "analysis": "BREITHORN_2026-10-22T1600_2026-11-01T0000"}
{"id": "BREITHORN-27", "start": "2026-10-29T16:00Z", "end": "2026-10-30T12:00Z", "family": "Thermal displacement", "description": "From the evening of 29 October to the morning of the 30th, the camera rotation and scale deviate a third time, then return at noon; COLH20, COLI24 and the reference REFPOU22 rise in corr_y, POUI24, COLI21 and the references REFG44N and REFI'21 go down, then everything returns. Nothing obstructs these targets on the images (the car of the same night only hides the bottom of the scene): this is the camera movement, incompletely compensated. It follows the cooling of the camera housing, read in the metrics, and comes back when it warms up: thermal effect on the camera, according to the expert: it is the housing temperature that matters, not the air temperature. Nothing to fear for the structure, nothing to do; do not trust these points.", "review": "2026-11-17", "analysis": "BREITHORN_2026-10-22T1600_2026-11-01T0000"}