15 lines
10 KiB
JSON
15 lines
10 KiB
JSON
{"start": "2026-11-04T21:15Z", "end": "2026-11-05T06:30Z", "family": "Thermal displacement", "description": "End of the camera thermal cycle of 04/11, from the start of the batch to the turn of the morning: at night, as the housing cools, the camera slowly comes back, the pan rises markedly, the tilt drops by the same amount, the scale drops; it does not rest before the morning. The targets on the right edge (PR18, PR16, PR13 to PR17) rise back a little in corr_x with it; the rest is absorbed by the compensation. The jumps at 01:00, 01:15 and 03:30 come from the reference CTR03 (separate labels). Deduced cause: the pose follows the housing temperature, and the quarry's rock face does not move with temperature. The structure is not moving, nothing to do."}
|
|
{"start": "2026-11-04T21:15Z", "end": "2026-11-07T14:00Z", "family": "Target issue", "description": "CTR01 (local reference, read as a target) stays right at its threshold throughout the batch, as since 16/10: rejected for a large part of the time, almost all night from 04 to 05/11 then mostly by day, every morning until early afternoon; its curve is missing a large part of the time and its kept points are very noisy. It does not enter the compensation: its rejections do not make the other targets jump. On the thumbnails, its spot is small at night and almost invisible by day, while that of PR17 stays sharp (05/11 10:00, 06/11 11:00, 07/11 12:00). Cause not established: state of the prism, or of the window in front of it, to be checked. Ignore its curve; act on the target."}
|
|
{"start": "2026-11-05T00:45Z", "end": "2026-11-05T01:30Z", "family": "Obstruction", "description": "A thread of the cobweb stretched in front of the lens, lit by the infrared and beaded, passes over the reference CTR03 (01:00 thumbnail: a large, blurry, bright dot covers its spot, CTR02 and CTR04 stay sharp). CTR03 is rejected at 01:00 and 01:15: the compensation then runs only on CTR02 and CTR04 (their reprojection falls to zero, no more sigma0), the basis changes and almost all targets jump together, markedly downward in corr_y, a little upward in corr_x, PR17, PR18 and PR11 the most; the raw positions do not move. Everything comes back at 01:30. Cause seen on the thumbnail. Very bad sign for these two measurements: do not trust the curves over the range; the structure is not moving."}
|
|
{"start": "2026-11-05T03:00Z", "end": "2026-11-05T09:45Z", "family": "Obstruction", "description": "PR09 right at its threshold all morning, rejected several times from 03:15 to 09:30: its curve has gaps. At night, the halo of a thread of the cobweb, lit by the infrared, passes over its spot (06:00 thumbnail), then over its neighbours at the bottom left; by day the thread is no longer visible but PR09 stays right at the threshold. Its neighbours PR10 and PR11 stay measured. Cause seen at night on the thumbnail, deduced by day. Ignore the curve of PR09 over the range; the structure is not moving."}
|
|
{"start": "2026-11-05T03:15Z", "end": "2026-11-05T03:45Z", "family": "Obstruction", "description": "The reference CTR03 is rejected for one measurement, at 03:30: the compensation runs on CTR02 and CTR04 alone (reprojection at zero), and almost all targets jump together, markedly downward in corr_y, PR17, PR18 and PR13 the most, then come back at the next measurement. Deduced cause: the thread of the cobweb that wanders that night between CTR03 and CTR02 (01:00 and 04:00 thumbnails); there is no image at 03:30. Ignore the points at 03:30; the structure is not moving."}
|
|
{"start": "2026-11-05T06:30Z", "end": "2026-11-06T07:00Z", "family": "Thermal displacement", "description": "Camera thermal cycle: in the morning, when the housing heats up (markedly, highest around 14:00), the camera turns: the pan drops strongly until early afternoon, the tilt rises markedly, the rotation drops a little, the scale increases; then it comes back in the evening and all night, as the housing cools, with no rest until the start of the next morning. In the middle of the movement, the pose fluctuates from one measurement to the next: at 09:45, then at 12:00 when the whole scene, references included, makes a one-measurement jolt, many targets drop a little in corr_y and come back at once. The compensation absorbs it poorly on the right edge: the corr_x of PR18 dips markedly around noon, PR16, PR17, PR13 to PR15 a little; the corr_y of PR18, PR17 and PR16 rises a little; the curves come back in the evening. The jumps of the night come from CTR03 (separate label). Deduced cause: the pose follows the housing temperature, and the rock face does not move with temperature. The structure is not moving, nothing to do."}
|
|
{"start": "2026-11-05T14:45Z", "end": "2026-11-05T15:15Z", "family": "Obstruction", "description": "PR09, still right at its threshold in the afternoon, is rejected for one measurement at 15:00: one point is missing, its neighbours stay measured. Deduced cause: the thread of the cobweb seen on its spot in the night (label of the morning), invisible by day. Ignore this point; the structure is not moving."}
|
|
{"start": "2026-11-05T23:00Z", "end": "2026-11-06T10:00Z", "family": "Obstruction", "description": "A thread of the cobweb stretched in front of the lens, lit by the infrared, settled on the reference CTR03 in the early evening (21:00, 23:00 and 06:00 thumbnails: a wide, bright, blurry band over its spot, CTR02 and CTR04 sharp next to it); its error_value then goes very close to the threshold and stays there. CTR03 is rejected at many measurements, from 23:15 to 09:45: at each one, the compensation runs only on CTR02 and CTR04 (reprojection at zero, no more sigma0), the pose flips and almost all targets jump together, markedly downward in corr_y and a little upward in corr_x, PR17, PR18, PR11 and PR13 the most, then come back at the next measurement: the curves look like a comb of spikes. The raw positions do not move. The disturbance continues by day without rejection (label of the following night separate). Cause seen on the images. Very bad sign for these measurements: do not trust the points of the range; the structure is not moving. The thread has to be removed from the window."}
|
|
{"start": "2026-11-06T07:00Z", "end": "2026-11-07T06:30Z", "family": "Thermal displacement", "description": "Camera thermal cycle: in the morning, when the housing heats up (markedly, highest in early afternoon), the camera turns: the pan drops strongly, the tilt rises markedly, the rotation drops a little, the scale increases; then it slowly comes back in the afternoon and at night, as the housing cools less than the day before, without coming all the way back: the next morning, the pan stays lower and the tilt higher than at the start. The compensation absorbs it poorly on the right edge: the corr_x of PR18 dips markedly in the afternoon, PR16, PR15 and PR13 a little less, PR17 and PR14 a little; PR04 rises a little; the corr_y of PR18, PR16, PR17, PR15 and PR08 rises a little. The spikes of the morning and of the night come from CTR03 (separate labels). Deduced cause: the pose follows the housing temperature, and the rock face does not move with temperature. The structure is not moving, nothing to do."}
|
|
{"start": "2026-11-06T09:15Z", "end": "2026-11-06T09:45Z", "family": "Obstruction", "description": "PR10 rises toward its threshold in late morning and is rejected for one measurement at 09:30: one point is missing, its neighbours stay measured, and the next point has already come back. Deduced cause: the thread of the cobweb, seen on its spot in the night (05/11 22:00 thumbnail), invisible by day. Ignore this point; the structure is not moving."}
|
|
{"start": "2026-11-06T21:15Z", "end": "2026-11-07T11:00Z", "family": "Obstruction", "description": "Second night of the cobweb thread on the reference CTR03 (the first is labelled separately, on 05/11 at 23:00): the bright, blurry band, lit by the infrared, still covers its spot (04:00 thumbnail); CTR03, which stayed near the threshold all day, is rejected at many measurements from 21:30 to 10:45, more and more often toward the morning. At each rejection, the compensation runs only on CTR02 and CTR04 (reprojection at zero), the pose flips and almost all targets jump together, markedly downward in corr_y and a little upward in corr_x, PR17, PR18, PR11 and PR13 the most, then come back at the next measurement. The raw positions do not move. After 11:00, CTR03 stays under the threshold and no longer disturbs the curves; at 12:30 its error_value falls back to its level, and in the evening the thread has moved beside its spot (07/11 20:00 image). Cause seen on the images. Very bad sign for these measurements: do not trust the points of the range; the structure is not moving. The thread has to be removed from the window."}
|
|
{"start": "2026-11-07T06:30Z", "end": "2026-11-07T14:00Z", "family": "Thermal displacement", "description": "Camera thermal cycle, until the end of the batch: in the morning, when the housing warms up (less than the days before), the camera turns: the pan drops markedly, the tilt rises markedly, the rotation drops, the scale increases; at the end of the batch it has not yet come back. The compensation absorbs it poorly: the corr_x of PR18 and PR13 dips a little, PR16 a little less; the corr_y of PR06 rises markedly, that of PR16 and PR15 a little. The spikes until 10:45 come from CTR03 (separate label). Deduced cause: the pose follows the housing temperature, and the rock face does not move with temperature. The structure is not moving, nothing to do."}
|
|
{"start": "2026-11-07T11:15Z", "end": "2026-11-07T11:45Z", "family": "Obstruction", "description": "PR04, whose error_value has been rising since late morning, is rejected for one measurement at 11:30, markedly above the threshold: one point is missing, its neighbours stay measured and the next point has come back. Deduced cause: the thread of the cobweb, which passes over the group of targets that day (bright band on the 14:00 image); nothing is visible on its 11:00 and 12:00 thumbnails. Ignore this point; the structure is not moving."}
|
|
{"start": "2026-11-07T13:45Z", "end": "2026-11-07T14:00Z", "family": "Obstruction", "description": "PR07 is rejected at 14:00, the last measurement of the batch, just above its threshold: one point is missing. On the 14:00 image, a bright, blurry band (a lit thread of the cobweb) goes down through the group of targets very close to it and lights the background of its thumbnail. Cause seen on the image. Ignore this point; the structure is not moving."}
|