36 lines
26 KiB
JSON
36 lines
26 KiB
JSON
{"start": "2026-09-04T06:15Z", "end": "2026-09-05T06:15Z", "family": "Thermal displacement", "description": "Thermal cycle of the camera, poorly compensated. In the morning, when the housing warms up little, the camera turns all at once (tilt rising, pan dropping, scale changing); the raw positions of all the targets and references move together. The compensation does not erase everything: the corr_x of PR18 drops a little, the corr_y of PR18 hardly moves, then the curves come back in the afternoon; the camera then comes back slowly, in the evening and all night (the pan rises again), until the start of the next morning. The two jumps of the basis during the day and the cobweb in the evening are labelled separately. Deduced cause: the pose follows the housing temperature, and the rock face of the quarry cannot move with the temperature. This is not a movement of the structure: nothing to do.", "review": "2026-11-17"}
|
|
{"start": "2026-09-04T11:00Z", "end": "2026-09-04T11:30Z", "family": "Visibility", "description": "The reference CTR04 is rejected for one measurement and the compensation runs without it: the basis changes, almost all the targets jump together on corr_x and corr_y; the corrections of the remaining references fall to zero, as the expert reads it the same day, then everything comes back at the next measurement. Several targets of the same area are rejected with it. On the thumbnails, the spots of CTR04 and PR08 are stretched in height at that instant, sharp before and after: the image is slightly less sharp, cause not established. The jump is not a movement: point to ignore.", "review": "2026-11-17"}
|
|
{"start": "2026-09-04T13:30Z", "end": "2026-09-04T14:00Z", "family": "Visibility", "description": "The reference CTR04 is rejected for one measurement and the compensation runs without it: the basis changes, almost all the targets jump together on corr_x and corr_y, and the remaining references too, then everything comes back at the next measurement. Several targets of the same area are rejected with it. On the thumbnails, the spots of CTR04 and PR08 are stretched in height at that instant, sharp before and after: the image is slightly less sharp, cause not established; same signature as at 11:15. The jump is not a movement: point to ignore.", "review": "2026-11-17"}
|
|
{"start": "2026-09-04T16:15Z", "end": "2026-09-04T19:15Z", "family": "Obstruction", "description": "In late afternoon, the spot of PR07 disappears (16:30 and 17:15 thumbnails) and PR07 is rejected almost until the evening; at dusk, a blurred band (cobweb thread) crosses it (18:00). CTR01 is rejected at times, the error_value of the reference CTR04 rises without getting it rejected, and a good part of the targets move a little on corr_x and corr_y, PR08, PR15 and PR16 above all, then come back. The structure does not move: ignore these curves over the range.", "review": "2026-11-17"}
|
|
{"start": "2026-09-05T01:30Z", "end": "2026-09-05T02:15Z", "family": "No data", "description": "Two measurements in a row are missing for all the sensors, at night: all the curves have a gap; the images are missing too, the voltage is normal around it. JUNGFRAU has the same gap at the same minutes, and WILDSTRUBEL loses the measurement that follows: a common cause outside the station (transmission or reception of the data) is possible, not a station failure; it is not established. The curves then resume: nothing to do on the station.", "review": "2026-11-17"}
|
|
{"start": "2026-09-05T06:15Z", "end": "2026-09-06T05:45Z", "family": "Thermal displacement", "description": "Thermal cycle of the camera, poorly compensated. In the morning, when the housing heats up, the camera turns gradually (tilt rising, pan dropping, scale changing); the raw positions of all the targets and references move together. The compensation does not erase everything: the corr_x of PR18, PR14, PR16 and PR15 drops markedly, the corr_y of PR18 rises, then the curves come back in the afternoon; the camera then comes back slowly, in the evening and all night (the pan rises again), until the start of the next morning. The following night is cold: at the trough of the housing temperature, the registration error rises and PR07, PR09, PR10 depart a little on corr_y, then come back as it warms up. The jump of PR17 at midday is labelled separately. Deduced cause: the pose follows the housing temperature, and the rock face of the quarry cannot move with the temperature. This is not a movement of the structure: nothing to do.", "review": "2026-11-17"}
|
|
{"start": "2026-09-05T12:00Z", "end": "2026-09-05T12:30Z", "family": "Displacement", "description": "PR17 jumps all at once on corr_y at midday, its corr_x drops a little; only PR17 moves, its neighbours PR18 and PR12 do not, and its error_value barely rises. The new level lasts beyond the end of the range: a plateau, night after night, until 08/10. In the night of 08/10, the October step (separate label, Obstruction: a mark on the window in front of PR17) brings its corr_y back to roughly its level from before the jump; but at the same instant its corr_x rises markedly and its error_value doubles, which the September jump had not done. This step is that of the mark, and it is not an established return from this plateau: after the rain of 24 to 25/10, when the error_value of PR17 fell back, its curves came back neither to their level from before the jump nor to that of the plateau, until the end of the October batch. Nothing visible on the thumbnails before and after the jump (12:00, 12:15), nor on the following days: the night thumbnails of 05/09, 06/09 and 20/09 do not show the disc of the October mark. Cause not established: a movement of this target is not excluded; to check on the images of PR17 and on site, to monitor.", "review": "2026-11-17"}
|
|
{"start": "2026-09-05T14:15Z", "end": "2026-09-05T16:30Z", "family": "Visibility", "description": "In the afternoon, while CTR01 (local reference, treated as a target) drops out at times because the rock around it is in full sun (15:00 thumbnail: the rock as bright as the spot, which drowns in it), the corr_y of PR01 jumps up for one measurement in the middle of the rejections and comes back at once, and PR14 dips a little on corr_x near the end of the episode. The other targets stay within their noise. Not a movement of the structure: points to ignore, nothing to do.", "review": "2026-11-18"}
|
|
{"start": "2026-09-06T01:15Z", "end": "2026-09-06T02:00Z", "family": "No data", "description": "Two measurements in a row are missing for all the sensors, at night: all the curves have a gap; the images are missing too, the voltage is normal around it. JUNGFRAU has the same gap at the same minutes, and WILDSTRUBEL loses the measurement that follows: a common cause outside the station (transmission or reception of the data) is possible, not a station failure; it is not established. The curves then resume: nothing to do on the station.", "review": "2026-11-17"}
|
|
{"start": "2026-09-06T05:45Z", "end": "2026-09-07T05:30Z", "family": "Thermal displacement", "description": "Thermal cycle of the camera, poorly compensated. In the morning, when the housing heats up strongly, the camera turns all at once (tilt rising, pan dropping, scale changing); the raw positions of all the targets and references move together. The compensation does not erase everything: the corr_x of PR18, PR16, PR15 and PR14 drops strongly, the corr_y of PR18 rises, then the curves come back in the afternoon; the camera then comes back slowly, in the evening and all night (the pan rises again), until the start of the next morning. At the quick start of the morning, several targets move a little on corr_y for one measurement. Deduced cause: the pose follows the housing temperature, and the rock face of the quarry cannot move with the temperature. This is not a movement of the structure: nothing to do.", "review": "2026-11-17"}
|
|
{"start": "2026-09-07T01:00Z", "end": "2026-09-07T01:30Z", "family": "No data", "description": "One measurement is missing for all the sensors, at night: all the curves have a gap. The image of that instant exists, the station synchronised at that instant (last_sync) and its voltage is normal: the station is running, the measurement of that instant is missing from the data. JUNGFRAU and WILDSTRUBEL measure at that instant: gap specific to the station, cause not established. The curves resume at the next measurement: nothing to do.", "review": "2026-11-17"}
|
|
{"start": "2026-09-07T05:30Z", "end": "2026-09-08T06:45Z", "family": "Thermal displacement", "description": "Thermal cycle of the camera, poorly compensated. In the morning, when the housing heats up strongly, the camera turns all at once (tilt rising, pan dropping, scale changing); the raw positions of all the targets and references move together. The compensation does not erase everything: the corr_x of PR18, PR16, PR15 and PR14 drops strongly, the corr_y of PR18 rises, then the curves come back in the afternoon; the camera then comes back slowly, in the evening, then only very little at night, until the start of the next morning. Deduced cause: the pose follows the housing temperature, and the rock face of the quarry cannot move with the temperature. This is not a movement of the structure: nothing to do.", "review": "2026-11-17"}
|
|
{"start": "2026-09-08T00:45Z", "end": "2026-09-08T01:15Z", "family": "No data", "description": "One measurement is missing for all the sensors, at night: all the curves have a gap. The image of that instant exists, the station synchronised at that instant (last_sync) and its voltage is normal: the station is running, the measurement of that instant is missing from the data. JUNGFRAU (which loses the previous measurement) and WILDSTRUBEL measure at that instant: gap specific to the station, cause not established. The curves resume at the next measurement: nothing to do.", "review": "2026-11-17"}
|
|
{"start": "2026-09-08T01:45Z", "end": "2026-09-08T02:45Z", "family": "Visibility", "description": "At night, PR07 is rejected for two measurements: its curve is missing; at the same time PR16 jumps on corr_x and corr_y, and PR15 a little on corr_x, then they come back at the measurement that follows the rejections. The 02:00 image is very noisy and the weak spot of PR07 is lost in it. Points to ignore, nothing to do.", "review": "2026-11-18"}
|
|
{"start": "2026-09-08T05:30Z", "end": "2026-09-08T08:15Z", "family": "Perturbation", "description": "Early in the morning, the corr_x of PR07 alone drops below its level, a little at first, then clearly for more than an hour, without rejection, and comes back gradually; its corr_y rises a little and its error_value rises at the same time, without reaching the threshold. The other targets do not follow it. Its spot is weak on the 07:00 thumbnail, without visible obstacle. Cause not established (a weakened spot, or a brief movement of PR07 itself); the curve comes back by itself the same morning: nothing to do, points to ignore."}
|
|
{"start": "2026-09-08T06:45Z", "end": "2026-09-09T06:00Z", "family": "Thermal displacement", "description": "Thermal cycle of the camera, poorly compensated. In the morning, when the housing heats up, the camera turns gradually (tilt rising, pan dropping, scale changing); the raw positions of all the targets and references move together. The compensation does not erase everything: the corr_x of PR18 drops a little, the corr_y of PR18 hardly moves, then the curves come back in the afternoon; the camera then comes back slowly, in the evening and all night (the pan rises again), until the start of the next morning. In early evening, when the pose starts moving again, several targets move a little for one measurement. Deduced cause: the pose follows the housing temperature, and the rock face of the quarry cannot move with the temperature. This is not a movement of the structure: nothing to do.", "review": "2026-11-17"}
|
|
{"start": "2026-09-09T06:00Z", "end": "2026-09-10T04:30Z", "family": "Thermal displacement", "description": "Thermal cycle of the camera, poorly compensated. In the morning, when the housing heats up, the camera turns all at once (tilt rising, pan dropping, scale changing); the raw positions of all the targets and references move together. The compensation does not erase everything: the corr_x of PR18, PR16, PR15 and PR14 drops markedly, the corr_y of PR18 rises, then the curves come back in the afternoon; the camera then comes back slowly, in the evening and all night (the pan rises again), until the start of the next morning. Deduced cause: the pose follows the housing temperature, and the rock face of the quarry cannot move with the temperature. This is not a movement of the structure: nothing to do.", "review": "2026-11-17"}
|
|
{"start": "2026-09-09T14:45Z", "end": "2026-09-09T16:00Z", "family": "Visibility", "description": "CTR01 (local reference, treated as a target) is rejected for two measurements in a row in the afternoon: its corr_x and corr_y curves are missing. Deduced cause: same hour and same signature as the other sunny afternoons, where the thumbnails show the rock in full sun around the target and the spot drowning in it (16/08, 21 and 22/09). At the second of them, the error_value of almost all the sensors rises and several targets move a little: PR18, PR15 and PR08 on corr_y, PR14, PR05 and PR01 on corr_x, most for one measurement, PR08 and PR15 coming back on corr_y only half an hour later. The other targets remain measured. The structure does not move: nothing to do, CTR01's curve is missing on sunny afternoons.", "review": "2026-11-18"}
|
|
{"start": "2026-09-10T04:30Z", "end": "2026-09-10T08:00Z", "family": "Visibility", "description": "Fog at daybreak, seen on the images from 04:45 to 05:30 (veiled scene, pale spots). The references CTR02 and CTR03 are rejected for two measurements, the camera is not re-registered: the corr_x and corr_y of almost all the targets jump together (PR10, PR11, PR02, PR03, PR17, PR18 the most) and come back at the next measurement; CTR01, PR01, PR07, PR09, PR10, PR17 are rejected at times, CTR01 twice more until the end of the fog. This is not a movement: ignore these points.", "review": "2026-11-17"}
|
|
{"start": "2026-09-10T04:30Z", "end": "2026-09-11T06:00Z", "family": "Thermal displacement", "description": "Thermal cycle of the camera, poorly compensated. In the morning, the camera turns (tilt rising, pan dropping, scale changing); the fog of dawn (labelled separately) stops the registration for a while at the very start. The raw positions of all the targets and references move together; the compensation does not erase everything: the corr_x of PR18, PR16 and PR15 drops markedly, the corr_y of PR18 rises, then the curves come back in the afternoon; the camera then comes back slowly, in the evening and at night, until the start of the next morning. Deduced cause: the pose follows the housing temperature, and the rock face of the quarry cannot move with the temperature. This is not a movement of the structure: nothing to do.", "review": "2026-11-17"}
|
|
{"start": "2026-09-10T14:30Z", "end": "2026-09-10T16:30Z", "family": "Visibility", "description": "In the afternoon, at the first rejection of CTR01 (local reference, treated as a target), PR14 and PR18 jump on corr_x and PR18 drops on corr_y for one measurement, with PR07 and PR17 departing too at that measurement and the next; during the later rejections the corr_y of PR01 stays a little high, then everything comes back. Deduced cause: the sun on the rock around CTR01, same hour and same signature as the other sunny afternoons where the thumbnails show the rock in full sun and the spot drowning in it. The structure does not move: points to ignore, nothing to do.", "review": "2026-11-18"}
|
|
{"start": "2026-09-11T06:00Z", "end": "2026-09-12T06:00Z", "family": "Thermal displacement", "description": "Thermal cycle of the camera, poorly compensated. In the morning, when the housing heats up, the camera turns gradually (tilt rising, pan dropping, scale changing); the raw positions of all the targets and references move together. The compensation does not erase everything: the corr_x of PR18, PR16, PR15 and PR14 drops markedly, the corr_y of PR18 hardly moves, then the curves come back in the afternoon; the camera then comes back slowly, in the evening and all night (the pan rises again), until the start of the next morning. Deduced cause: the pose follows the housing temperature, and the rock face of the quarry cannot move with the temperature. This is not a movement of the structure: nothing to do.", "review": "2026-11-17"}
|
|
{"start": "2026-09-12T06:00Z", "end": "2026-09-13T05:45Z", "family": "Thermal displacement", "description": "Thermal cycle of the camera, poorly compensated. In the morning, when the housing heats up, the camera turns gradually (tilt rising, pan dropping, scale changing); the raw positions of all the targets and references move together. The compensation does not erase everything: the corr_x of PR18, PR16, PR15 and PR14 drops markedly, the corr_y of PR18 rises, then the curves come back in the afternoon; the camera then comes back slowly, in the evening and all night (the pan rises again), until the start of the next morning. Deduced cause: the pose follows the housing temperature, and the rock face of the quarry cannot move with the temperature. This is not a movement of the structure: nothing to do.", "review": "2026-11-18"}
|
|
{"start": "2026-09-12T22:45Z", "end": "2026-09-13T00:00Z", "family": "Visibility", "description": "At night, PR07 makes a clear corr_x jump for two measurements without being rejected, after a small dip just before, and its corr_y rises a little, then it comes back; its error_value rises at the first of them, and its neighbour PR04 is rejected at the same two measurements. On the 23:15 and 23:30 thumbnails, the spots of PR07 and PR04 are smaller and fainter than at 23:00 and 23:45, nothing visible in front of them, while PR06 stays unchanged. Cause not established: a poorer view of these targets at night, as on other nights of this station (a lit cobweb thread is possible, not seen). Points to ignore, this is not a movement.", "review": "2026-11-18"}
|
|
{"start": "2026-09-13T04:00Z", "end": "2026-09-13T05:15Z", "family": "Perturbation", "description": "A single measurement, at night: the three references CTR02, CTR03 and CTR04 and a few targets (PR18, PR17, PR12, PR01) make a small jump on corr_x and corr_y and come back at the next measurement; PR07 is rejected for three measurements. Nothing visible on the images from 04:00 to 04:45. Cause not established; the immediate return says this is not a movement of the structure: points to ignore, nothing to do.", "review": "2026-11-17"}
|
|
{"start": "2026-09-13T05:45Z", "end": "2026-09-14T07:00Z", "family": "Thermal displacement", "description": "Thermal cycle of the camera, poorly compensated. In the morning, when the housing warms up little, the camera turns gradually (tilt rising, pan dropping, scale changing); the raw positions of all the targets and references move together. The compensation does not erase everything: the corr_x of PR14 and PR18 drops a little, the corr_y of PR18 rises, then the curves come back in the afternoon; the camera then comes back slowly, in the evening, then only very little at night, until the start of the next morning. Weak day: the camera movement is small and the dip of the targets barely visible; the agitation of early afternoon is labelled separately. Deduced cause: the pose follows the housing temperature, and the rock face of the quarry cannot move with the temperature. This is not a movement of the structure: nothing to do.", "review": "2026-11-18"}
|
|
{"start": "2026-09-13T11:30Z", "end": "2026-09-13T16:00Z", "family": "Visibility", "description": "In early afternoon, the corrections of several targets fluctuate, one-measurement jumps in one direction then the other, mostly PR15, PR14, PR16, PR18, and a little PR08, PR06, PR11, PR13; PR07 is rejected most of the time and PR16 once, the error_value of several targets rises. After its last rejection, PR07 comes back clearly below its level on corr_x for two measurements, its error_value still high, before returning. The camera is calm. Images from 12:00 to 14:45: nothing in front of the targets, spots a little larger towards the end. Cause not established, perhaps daytime heat shimmer. The structure does not move: do not trust these points.", "review": "2026-11-18"}
|
|
{"start": "2026-09-14T07:00Z", "end": "2026-09-15T06:00Z", "family": "Thermal displacement", "description": "Thermal cycle of the camera, poorly compensated. In the morning, when the housing heats up, the camera turns gradually (tilt rising, pan dropping, scale changing); the raw positions of all the targets and references move together. The compensation does not erase everything: the corr_x of PR18 drops a little, the corr_y of PR18 hardly moves, then the curves come back in the afternoon; the camera then comes back slowly, in the evening and all night (the pan rises again), until the start of the next morning. Deduced cause: the pose follows the housing temperature, and the rock face of the quarry cannot move with the temperature. This is not a movement of the structure: nothing to do.", "review": "2026-11-17"}
|
|
{"start": "2026-09-14T14:15Z", "end": "2026-09-14T16:30Z", "family": "Visibility", "description": "In the afternoon, the corr_x of CTR01 (local reference, treated as a target) plunges for one measurement just before it starts dropping out; during its rejections the corr_y of PR01 rises for two measurements and comes back, and at the last rejection PR09 dips on corr_y for two measurements. Deduced cause: the sun on the rock around CTR01, same hour and same signature as the other sunny afternoons where the thumbnails show the rock in full sun and the spot drowning in it. The structure does not move: points to ignore, nothing to do.", "review": "2026-11-18"}
|
|
{"start": "2026-09-15T06:00Z", "end": "2026-09-16T08:45Z", "family": "Thermal displacement", "description": "Thermal cycle of the camera, poorly compensated. In the morning, when the housing heats up strongly, the camera turns all at once (tilt rising, pan dropping, scale changing); the raw positions of all the targets and references move together. The compensation does not erase everything: the corr_x of PR18, PR16, PR15 and PR14 drops strongly, the corr_y of PR18 rises, then the curves come back in the afternoon; the camera then comes back slowly, in the evening and all night (the pan rises again), until the start of the next morning. In mid-morning, the pose makes a step all at once (tilt and scale), well compensated. Deduced cause: the pose follows the housing temperature, and the rock face of the quarry cannot move with the temperature. This is not a movement of the structure: nothing to do.", "review": "2026-11-17"}
|
|
{"start": "2026-09-15T14:45Z", "end": "2026-09-15T16:15Z", "family": "Visibility", "description": "In the afternoon, while CTR01 (local reference, treated as a target) drops out almost without interruption, the corr_y of PR01 rises for a few measurements and comes back, PR14 departs a little on corr_x, and at the last rejection PR18 drops on corr_x for one measurement. Deduced cause: the sun on the rock around CTR01, same hour and same signature as the other sunny afternoons where the thumbnails show the rock in full sun and the spot drowning in it. The structure does not move: points to ignore, nothing to do.", "review": "2026-11-18"}
|
|
{"start": "2026-09-16T01:30Z", "end": "2026-09-16T03:15Z", "family": "Obstruction", "description": "At night, at the first rejection of PR07, PR08 drops on corr_x for one measurement, then PR15 at the next, both back at once; PR07 then stays rejected for more than an hour, its spot almost invisible on the 02:30 image while its neighbours are sharp. Cobweb threads lit by the infrared cross the field of the targets on those nights (23:00 images on 15 and 16/09): deduced cause, without being seen on the target, a cobweb in front of PR07 that brushes its neighbours as it settles. Points to ignore, this is not a movement.", "review": "2026-11-18"}
|
|
{"start": "2026-09-16T07:45Z", "end": "2026-09-16T08:45Z", "family": "Visibility", "description": "PR07 is rejected for two measurements, its curve is missing; at the same time PR13 and PR16 rise a little on corr_y for three measurements, their raw positions departing from the overall movement of the targets, then come back. Meanwhile the housing cools for a moment and the camera turns back a little (thermal cycle, labelled separately). Nothing visible in front of the targets on the 08:00 image, the spot of PR07 is weak there. Cause not established (the cobweb seen at night in the field on those days is not seen at this hour). Points to ignore, nothing to do.", "review": "2026-11-18"}
|
|
{"start": "2026-09-16T08:45Z", "end": "2026-09-17T05:45Z", "family": "Thermal displacement", "description": "Thermal cycle of the camera, poorly compensated. In the morning, when the housing warms up little, the camera turns gradually (tilt rising, pan dropping, scale changing); the raw positions of all the targets and references move together. The compensation does not erase everything: the corr_x of PR15 drops a little, the corr_y of PR18 hardly moves, then the curves come back in the afternoon; the camera then comes back slowly, in the evening, then only very little at night, until the start of the next morning. The pose starts late and little. Deduced cause: the pose follows the housing temperature, and the rock face of the quarry cannot move with the temperature. This is not a movement of the structure: nothing to do.", "review": "2026-11-17"}
|
|
{"start": "2026-09-16T14:15Z", "end": "2026-09-16T16:30Z", "family": "Visibility", "description": "In the afternoon, at two of the three single rejections of CTR01 (local reference, treated as a target), PR13 departs on corr_y for one measurement, up the first time and down the second, and at the last one PR02 dips on corr_y while the references shift slightly together; each comes back at once, the deviations staying just above the noise. Deduced cause: the sun on the rock around CTR01, same hour and same signature as the other sunny afternoons where the thumbnails show the rock in full sun and the spot drowning in it. Points to ignore, nothing to do.", "review": "2026-11-18"}
|