Files
aimsight-labeling/auto/BREITHORN.jsonl
T
maximeandClaude Opus 5.5 bed0f7d09e review is now the date the user validated a label in aimsight-app; the agents' review dates removed from auto/
Quality over quantity: only the analyses discussed and validated in the app are marked. validate.py no longer
requires review; precedents.py gives the provenance as validated by the user or not.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-17 10:01:22 +01:00

28 lines
21 KiB
JSON

{"id": "BREITHORN-1", "start": "2026-10-03T00:00Z", "end": "2026-10-04T20:00Z", "family": "Obstruction", "description": "The curves of COLH20''' and POUI22 are missing from the morning of 3 October to the late afternoon of 4 October: their measurements are rejected, like those of the reference REFPOU22. On the thumbnails and the images of those hours, the three spots have disappeared behind an object with light reflections in vertical bands, a vehicle parked in front of them; they come back at the evening measurement of the 4th, without any offset. The compensation then runs on three references; the other targets do not jump, only the corr_x of the reference REFH22 shifts a little. The structure does not move: ignore COLH20''' and POUI22 over the range."}
{"id": "BREITHORN-2", "start": "2026-10-03T00:00Z", "end": "2026-10-13T04:00Z", "family": "Displacement", "description": "From the start of the data to 13 October, six targets drift slowly and steadily, all in the same direction, mostly in corr_x, in corr_y too except POUI19: COLH20, COLI20, COLI21, COLJ19, POUI19 and POUI20; COLI24 drifts in the opposite direction in corr_y. Their drift follows the camera pose step by step, as the camera gradually tilts (tilt increasing, pan and rotation decreasing), while their position in the image hardly moves and their error_value stays stable; the other targets, such as POUH21, do not drift. Cause given by the expert: the camera is gradually nodding forward and the compensation of its movement is not complete, correcting some targets better than others. According to the expert, COLJ19 and POUI19, which drift the most, are much closer to the camera than the other targets; for the other drifting targets, the reason for their poorer compensation (position, angle) is not established. The temperature of the camera housing drops slightly over the range, link not established. According to the expert, BREITHORN, MICHIGAN and NEBRASKA are in the same building: the cameras of the three stations tilt together, in the same direction and on the same dates (advance until 12 October, stop and slight backward movement from 13 to 16, resumption from the 17th to the end of the month), which points to a cause common to the building rather than a fault of this camera alone; at equal housing temperature, the cameras are more tilted at the end of the month than in the middle: temperature does not explain it alone, link not established. For the customer: the targets do not move relative to each other, this is not a movement of the structure; the camera tilt is to be monitored."}
{"id": "BREITHORN-3", "start": "2026-10-04T12:00Z", "end": "2026-10-04T20:00Z", "family": "Obstruction", "description": "For the duration of one measurement, on 4 October in the late afternoon, all the targets jump together in corr_x and in corr_y, then return at the next measurement. At that measurement, POUI24 is rejected in turn (curve absent), COLI22 jumps clearly in corr_y, and the reference REFH22, half hidden, rises clearly in error_value without being discarded, which distorts the basis of all the targets; COLH20''', POUI22 and REFPOU22 remain hidden by the vehicle parked since the day before. On the image of that hour, the banded reflections have disappeared and a light shines under POUI22: the obstacle has changed position in front of the bottom of the scene. The jumps are not a movement: point to ignore, nothing to do."}
{"id": "BREITHORN-4", "start": "2026-10-06T16:00Z", "end": "2026-10-07T08:00Z", "family": "Obstruction", "description": "On the night of 6 to 7 October, the curves of COLI22, COLI24 and POUI22 are missing: their measurements are rejected, the spots are no longer visible on the thumbnails. On the 20:00 UTC image, the cab of a parked vehicle is visible right in front of these targets, at the bottom of the scene. The references hold, the other targets do not move; everything comes back in the morning. The structure does not move: ignore these three targets over the range."}
{"id": "BREITHORN-5", "start": "2026-10-07T08:00Z", "end": "2026-10-07T16:00Z", "family": "Obstruction", "description": "For the duration of one measurement, on 7 October at noon, the reference REFI'21 is rejected: on the image, a vehicle with reflective strips passes on the left of the scene and hides the group of REFI'21. The compensation runs on three references, the basis changes: several targets (POUI19, COLJ19, COLI20, COLI22, COLI24, POUI24) jump a little, mostly in corr_y, then return at the next measurement. This is not a movement: point to ignore."}
{"id": "BREITHORN-6", "start": "2026-10-07T16:00Z", "end": "2026-10-08T04:00Z", "family": "Obstruction", "description": "On the night of 7 to 8 October, COLI24 is rejected from the evening, then COLI22 and POUI22 too around midnight (curves absent); POUI22 jumps in the evening and POUI24, half hidden, jumps clearly in corr_y around midnight. On the thumbnails, these spots are hidden or reduced, and a vehicle is visible in front of the bottom of the scene. Everything comes back in the morning. The structure does not move: ignore these targets over the range."}
{"id": "BREITHORN-7", "start": "2026-10-08T20:00Z", "end": "2026-10-09T08:00Z", "family": "Obstruction", "description": "On the night of 8 to 9 October, the curves of COLI22, COLI24 and POUI22 are missing (measurements rejected) and the reference REFH22 is rejected too; POUI24, half hidden, jumps in corr_x and in corr_y. On the thumbnails, these spots are hidden and a parked vehicle is visible in front of the bottom of the scene, the image veiled by its light. The compensation runs on three references without making the other targets jump. Everything comes back in the morning: ignore these targets over the range, the structure does not move."}
{"id": "BREITHORN-8", "start": "2026-10-09T16:00Z", "end": "2026-10-10T00:00Z", "family": "Obstruction", "description": "On the evening of 9 October, for the duration of one measurement, the curves of COLI22, COLI24 and POUI22 are missing (measurements rejected); on the thumbnails, their spots are hidden, a vehicle is in front of the bottom of the scene. The other targets and the references do not move. Point to ignore, nothing to do."}
{"id": "BREITHORN-9", "start": "2026-10-10T00:00Z", "end": "2026-10-10T08:00Z", "family": "Obstruction", "description": "For the duration of one measurement, on 10 October in the morning, all the targets jump together, mostly in corr_y, then return at the next measurement; COLI22, COLI24, POUI22 and POUI24 are rejected (curves absent). On the image of that hour, a vehicle is in front of the bottom of the scene, these spots are hidden and the whole image is veiled by its light; the reference REFH22, hampered, rises clearly in error_value without being discarded, which distorts the basis of all the targets. This is not a movement: point to ignore."}
{"id": "BREITHORN-10", "start": "2026-10-13T00:00Z", "end": "2026-10-13T08:00Z", "family": "Obstruction", "description": "For the duration of one measurement, on 13 October in the morning, COLH20''' and COLI24 are rejected (curves absent) and POUI24, POUI22 and COLI22, partly hidden, jump in corr_x or in corr_y; everything returns at the next measurement. On the image of that hour, a car with its headlights on is in front of the bottom of the scene. The references hold. Point to ignore, the structure does not move."}
{"id": "BREITHORN-11", "start": "2026-10-13T04:00Z", "end": "2026-10-16T20:00Z", "family": "Displacement", "description": "From 13 to 16 October, the drift stops and goes back a little: the camera straightens slightly (tilt decreasing, rotation rising), and the same targets, COLH20, COLI20, COLI21, COLJ19, POUI19 and POUI20, partly come back in corr_x, POUI19 most of all. Their position in the image hardly moves, their error_value stays stable. According to the expert, COLJ19 and POUI19, which drift the most, are much closer to the camera than the other targets; for the other drifting targets, the reason for their poorer compensation (position, angle) is not established. This return falls on days when the camera housing temperature no longer drops, link not established. According to the expert, BREITHORN, MICHIGAN and NEBRASKA are in the same building: the cameras of MICHIGAN and NEBRASKA stop and move back on the same days. This is the remainder of the incomplete compensation of the camera movement, not a movement of the targets. For the customer: the targets do not move relative to each other, this is not a movement of the structure; the camera tilt is to be monitored."}
{"id": "BREITHORN-12", "start": "2026-10-15T20:00Z", "end": "2026-10-16T12:00Z", "family": "No data", "description": "No measurement for any sensor during three acquisitions, in the night of 15 to 16 October, and no image; the curves then resume at the level they had before. The station was powered: full battery and normal voltage in the metrics until the early morning; the metrics are then missing for a few hours, then everything returns. The same gap affects the two other stations of the building (MICHIGAN, NEBRASKA, in the same building according to the expert), but also all the other stations. The gap starts at the same time, around 23:00, on the nine stations that were measuring then (LENZSPITZE only has its first measurements in the middle of that night, WILDSTRUBEL is already stopped), and their metrics stop at the same time on most of them; measurements and metrics resume at different times depending on the station, most of them in late morning. JUNGFRAU, whose metrics continue, accumulates unsent entries all night, sent in late morning, and yet its measurements for the night are missing from the data: a common cause outside the stations (transmission or reception of the data), not a shutdown of the stations; it is not established. The cause is therefore not specific to the building. The curves are missing over the range; nothing to do on the station if it does not repeat."}
{"id": "BREITHORN-13", "start": "2026-10-16T20:00Z", "end": "2026-11-01T00:00Z", "family": "Displacement", "description": "From 17 October to the end of the batch, the drift resumes, faster than at the beginning of the month until the 25th, then clearly slower without stopping: the camera tilts again (tilt increasing, pan and rotation decreasing), and COLH20, COLI20, COLI21, COLJ19, POUI19 and POUI20 drift with it, mostly in corr_x and also in corr_y, POUI19 the most; COLI24 drifts in the opposite direction in corr_y. Their position in the image hardly moves, their error_value stays stable, POUH21 does not drift. Cause given by the expert: the camera is nodding forward and the compensation of its movement is not complete, correcting some targets better than others. According to the expert, COLJ19 and POUI19, which drift the most, are much closer to the camera than the other targets; for the other drifting targets, the reason for their poorer compensation (position, angle) is not established. The resumption coincides with the drop in the camera housing temperature, but the drift does not come back when it rises: link not established. According to the expert, BREITHORN, MICHIGAN and NEBRASKA are in the same building: the cameras of the three stations tilt together, in the same direction and on the same dates (advance until 12 October, stop and slight backward movement from 13 to 16, resumption from the 17th to the end of the month), which points to a cause common to the building rather than a fault of this camera alone; at equal housing temperature, the cameras are more tilted at the end of the month than in the middle: temperature does not explain it alone, link not established. For the customer: the targets do not move relative to each other, this is not a movement of the structure; the camera tilt is to be monitored."}
{"id": "BREITHORN-14", "start": "2026-10-19T00:00Z", "end": "2026-10-19T12:00Z", "family": "Thermal displacement", "description": "On 19 October in the morning, over two measurements, the camera rotation and scale suddenly deviate and its tilt takes a step; several targets deviate at the same time in opposite directions (COLH20 and the reference REFPOU22 upward in corr_y, COLI21 downward in corr_x and in corr_y), then return at noon. Nothing obstructs the view on the images, the error_value change little: this is the camera movement, incompletely compensated. It falls at the trough of the camera housing temperature, read in the metrics, and comes back when it rises: thermal effect on the camera, according to the expert: it is the housing temperature that matters, not the air temperature. Nothing to fear for the structure, nothing to do; do not trust these two points."}
{"id": "BREITHORN-15", "start": "2026-10-21T16:00Z", "end": "2026-10-22T08:00Z", "family": "Obstruction", "description": "On the night of 21 to 22 October, the curve of COLI24 is missing (measurements rejected); COLI22, partly hidden, and POUI22 deviate a little in corr_x and in corr_y. On the 20:00 UTC image, the cab of a parked vehicle is in front of these targets, the spot of COLI24 is no longer visible. Everything comes back in the morning. The structure does not move: ignore these targets over the range."}
{"id": "BREITHORN-16", "start": "2026-10-22T16:00Z", "end": "2026-10-23T08:00Z", "family": "Obstruction", "description": "On the night of 22 to 23 October, the curve of COLI24 is missing again (measurements rejected) and COLI22 goes down in corr_y. On the thumbnails, the spot of COLI24 is hidden and that of COLI22 reduced; no object is visible in front of them on the images of the night. This is the signature of nights when a vehicle is parked in front of the bottom of the scene: probable cause, not established. Everything comes back in the morning: ignore these two targets over the range."}
{"id": "BREITHORN-17", "start": "2026-10-23T12:00Z", "end": "2026-10-24T20:00Z", "family": "Thermal displacement", "description": "From the evening of 23 October to the afternoon of the 24th, the camera scale and rotation deviate a little, like the cold nights of 19, 28 and 29 October; COLH20 and the reference REFPOU22 rise in corr_y, COLI21 and the references REFG44N and REFI'21 go down, weakly, then return. This movement falls at the trough of the camera housing temperature, read in the metrics: thermal effect on the camera, according to the expert: it is the housing temperature that matters, not the air temperature. It is mixed with the obstruction of the same night, which only affects the bottom targets. Nothing to fear for the structure, nothing to do."}
{"id": "BREITHORN-18", "start": "2026-10-23T16:00Z", "end": "2026-10-24T16:00Z", "family": "Obstruction", "description": "From the evening of 23 October to noon on 24 October, a car is parked in front of the bottom of the scene, seen on the images (grille and headlight, then headlights on). The curve of COLI24 is missing throughout; COLI22, first partly hidden, makes a very large jump in corr_x (its measured center slides over the visible part of its spot) and POUI22 jumps in corr_x, then COLI22, POUI22 and POUI24 are rejected on the morning of the 24th. The references hold. The structure does not move: ignore these targets over the range."}
{"id": "BREITHORN-19", "start": "2026-10-24T12:00Z", "end": "2026-10-26T00:00Z", "family": "Obstruction", "description": "From the afternoon of 24 October to the evening of the 25th, another vehicle, seen on the images with three small lights and oblique pillars, is parked in front of the bottom of the scene: the curves of COLI24 and POUI22 are missing (measurements rejected, spots hidden or reduced on the thumbnails). The references and the other targets do not move. Ignore these two targets over the range, the structure does not move."}
{"id": "BREITHORN-20", "start": "2026-10-25T20:00Z", "end": "2026-10-26T08:00Z", "family": "Obstruction", "description": "On the night of 25 to 26 October, an oblique structure, seen on the images in front of the bottom of the scene, hides the references REFH22 and REFPOU22, and COLH20''', COLI22 and POUI24 (measurements rejected, curves absent); POUI22, partly hidden, jumps in corr_x and in corr_y. The compensation only runs on two references: the basis changes, several targets (COLI20, POUI20, POUH21, COLJ19) shift a little in corr_x. Very bad sign for the measurement: data of the range not to be trusted; everything comes back in the morning."}
{"id": "BREITHORN-21", "start": "2026-10-26T04:00Z", "end": "2026-10-26T12:00Z", "family": "Thermal displacement", "description": "On 26 October in the morning, for the duration of one measurement, the camera rotation and scale deviate, like the cold nights of 19, 23-24, 28 and 29 October; COLH20 and the reference REFPOU22 rise in corr_y, the references REFG44N and REFI'21 go down, weakly, then everything returns at noon. Nothing obstructs the view on the 08:00 image: the structure of the night is gone and all the spots are in place. This movement falls at the trough of the camera housing temperature, read in the metrics; according to the expert, BREITHORN, MICHIGAN and NEBRASKA are in the same building, and the two other cameras move the same morning, at the same cooling. Thermal effect on the camera, according to the expert: it is the housing temperature that matters, not the air temperature. Nothing to fear for the structure, nothing to do; do not trust this point."}
{"id": "BREITHORN-22", "start": "2026-10-26T12:00Z", "end": "2026-10-27T00:00Z", "family": "Obstruction", "description": "On the evening of 26 October, a car with its headlights on, seen on the 16:00 UTC image, is parked in front of the bottom of the scene: the reference REFH22 is rejected, the compensation runs on three references; the curves of COLI24 and POUI24, then of POUI22, are missing, and POUI22 then POUI24, partly hidden, make large jumps. The other targets do not move. Ignore these targets over the range, the structure does not move."}
{"id": "BREITHORN-23", "start": "2026-10-26T20:00Z", "end": "2026-10-27T08:00Z", "family": "Obstruction", "description": "On the night of 26 to 27 October, an oblique structure, seen on the images in front of the bottom of the scene, hides the reference REFPOU22, COLH20''' and POUI22 (measurements rejected, curves absent). The compensation runs on three references: REFG44N and REFI'21 shift a little in corr_x, the targets hardly. Everything comes back in the morning. Ignore these targets over the range."}
{"id": "BREITHORN-24", "start": "2026-10-28T00:00Z", "end": "2026-10-28T12:00Z", "family": "Thermal displacement", "description": "On 28 October in the morning, over two measurements, the camera rotation and scale deviate then return at noon; at the same time, several targets deviate in opposite directions in corr_y (COLH20, COLI24, POUI22 and the reference REFPOU22 upward, POUI24 and the references REFG44N and REFI'21 downward), and return with the camera. Nothing obstructs the view on the images: this is the camera movement, incompletely compensated. It falls at the trough of the camera housing temperature, read in the metrics, and comes back when it rises: thermal effect on the camera, according to the expert: it is the housing temperature that matters, not the air temperature. Nothing to fear for the structure, nothing to do; do not trust these points."}
{"id": "BREITHORN-25", "start": "2026-10-28T16:00Z", "end": "2026-10-29T16:00Z", "family": "Thermal displacement", "description": "From the evening of 28 October to noon on the 29th, the camera rotation and scale deviate again, for longer and more strongly, then return in the afternoon; the same targets deviate with it in corr_y (COLH20, POUI22, the reference REFPOU22 upward, COLI21, COLH20''' and POUI24 downward), then return. Nothing obstructs the view on the images: this is the camera movement, incompletely compensated. It follows the coldest night of the batch for the camera housing, read in the metrics, and comes back when it warms up: thermal effect on the camera, according to the expert: it is the housing temperature that matters, not the air temperature. Nothing to fear for the structure, nothing to do; do not trust these points."}
{"id": "BREITHORN-26", "start": "2026-10-29T16:00Z", "end": "2026-10-30T04:00Z", "family": "Obstruction", "description": "On the night of 29 to 30 October, a car with a headlight on, seen on the images, is parked in front of the bottom of the scene: the curve of COLI24 is missing (measurements rejected); POUI22 makes a large jump in corr_x, COLH20''' jumps in corr_x then in corr_y, COLI22 deviates a little, all partly hidden; they return in the morning. The references hold. Ignore these targets over the range, the structure does not move."}
{"id": "BREITHORN-27", "start": "2026-10-29T16:00Z", "end": "2026-10-30T12:00Z", "family": "Thermal displacement", "description": "From the evening of 29 October to the morning of the 30th, the camera rotation and scale deviate a third time, then return at noon; COLH20, COLI24 and the reference REFPOU22 rise in corr_y, POUI24, COLI21 and the references REFG44N and REFI'21 go down, then everything returns. Nothing obstructs these targets on the images (the car of the same night only hides the bottom of the scene): this is the camera movement, incompletely compensated. It follows the cooling of the camera housing, read in the metrics, and comes back when it warms up: thermal effect on the camera, according to the expert: it is the housing temperature that matters, not the air temperature. Nothing to fear for the structure, nothing to do; do not trust these points."}