Files
aimsight-labeling/auto/SNCF01.jsonl
T
2026-11-17 10:31:38 +01:00

98 lines
70 KiB
JSON

{"id": "SNCF01-1", "start": "2026-10-04T00:00Z", "end": "2026-11-01T00:00Z", "family": "Target issue", "description": "BG.1: all its measurements are rejected, from the start of the data to the end of the batch; its curve is missing entirely. Its recognition error stays above the threshold, by day and by night, whatever the weather; on the night image its spot appears doubled. Target permanently poorly seen (orientation, installation or configuration to be checked): act on the target; no curve to read.", "review": "2026-11-17"}
{"id": "SNCF01-2", "start": "2026-10-04T00:00Z", "end": "2026-11-01T00:00Z", "family": "Target issue", "description": "F4.1: all its measurements are rejected over the batch; its curve is missing entirely. Its recognition error stays above the threshold permanently; on the images its spot is small and faint. Target permanently poorly seen: act on the target; no curve to read.", "review": "2026-11-17"}
{"id": "SNCF01-3", "start": "2026-10-04T00:00Z", "end": "2026-11-01T00:00Z", "family": "Target issue", "description": "CV.7: most of its measurements are rejected over the whole batch, its recognition error oscillating around the threshold; its curve has only scattered points, and the last ones accepted, at the end of the batch, move strongly away from its level without anything else moving. Target permanently poorly seen (by day, its spot touches the edge of a bright structure on the image): act on the target; ignore its curve.", "review": "2026-11-17"}
{"id": "SNCF01-4", "start": "2026-10-04T00:00Z", "end": "2026-11-01T00:00Z", "family": "Target issue", "description": "F4.4: most of its measurements are rejected over the whole batch, its recognition error staying stuck to the threshold; its curve has only scattered, noisy points. Faint, doubled spot on the night image. Target permanently poorly seen: act on the target; ignore its curve.", "review": "2026-11-17"}
{"id": "SNCF01-5", "start": "2026-10-04T00:00Z", "end": "2026-11-01T00:00Z", "family": "Target issue", "description": "F4.3: about one measurement in two is rejected, over the whole batch, by day and by night: its recognition error stays just under the threshold and keeps crossing it; its curve has gaps and is noisier than that of the neighbouring targets. Doubled spot, stuck to another, on the night image. Target permanently poorly seen: to be checked; do not trust its curve.", "review": "2026-11-17"}
{"id": "SNCF01-6", "start": "2026-10-04T00:00Z", "end": "2026-11-01T00:00Z", "family": "Target issue", "description": "CV.6: its recognition error stays just under the threshold over the whole batch and rises slowly; part of its measurements are rejected, in runs of several hours mostly at night, more often at the end of the month, and its curve has gaps and is noisy. Small spot next to a much brighter reflector (seen on the images). Target permanently at the limit of detection: to be checked; do not trust its curve.", "review": "2026-11-17"}
{"id": "SNCF01-7", "start": "2026-10-04T00:00Z", "end": "2026-11-01T00:00Z", "family": "Displacement", "description": "Over the whole batch, as one single episode, the corrected curves of many targets drift slowly, with no return: corr_y rises on BG.2, F4.5, F4.6, P4, CV.8, F4.3, P5, and drops on P1, P7, CV.1; corr_x drops on P2, P3, P4, F4.6; the drift flattens at the end of the month; part of the drop of P7, CV.1 comes from the jump of 15/10 in the morning, labelled separately. At the same time, the camera rotation drops and its tilt rises slowly, the reprojection error of the references increases and, relative to the overall movement of the targets, the positions of the targets relative to one another change more and more over the month (P1, P7, F4.5, BG.2 especially), like those of the references: the whole scene slowly deforms in the image, while the camera tilts. No temperature is available for this station (empty metrics); the cause is not established (seasonal cooling, incomplete compensation of the camera tilt, a reference that moves, or a movement of the wall). The movement of the structure is not established: to be watched.", "review": "2026-11-17"}
{"id": "SNCF01-8", "start": "2026-10-04T08:15Z", "end": "2026-10-04T17:15Z", "family": "Visibility", "description": "By day (04/10): the corrected curves of all targets fluctuate much more than at night, from one measurement to the next, especially CV.2, CV.4, F4.2, BG.3, CV.6, CV.9, with one-measurement jumps that come back at once, and CV.2, CV.4 (sometimes F4.2) are rejected at times, their curves having gaps; their recognition error varies strongly by day. At night everything becomes calm again. Deduced cause: heat shimmer from the air heated above the tracks (a fast noise over the whole scene, by day only), not visible on the images; the rejections of CV.2 and CV.4, low targets, may also come from passages, not seen. Do not trust the small movements of these curves by day; this is not a movement of the structure.", "review": "2026-11-17"}
{"id": "SNCF01-9", "start": "2026-10-04T09:00Z", "end": "2026-10-05T06:30Z", "family": "Thermal displacement", "description": "Daytime thermal cycle (04/10): from the morning, the pan and the tilt of the camera drop and its scale rises, then they slowly come back in the afternoon, the evening and all night, until the start of the next morning. The corrected curves follow the same cycle, poorly compensated: corr_x of P7, P5, P6 and corr_y of P5, P6, P7, P4 move away from their night level during the day then come back, partly all at once at nightfall, when the recognition error also comes back (the lighting plays a part). Deduced cause: the camera and its mount move with the heat of the day (camera pose); the structure, a masonry wall, is not supposed to move like that. No temperature is available to confirm it. Normal, nothing to do.", "review": "2026-11-17"}
{"id": "SNCF01-10", "start": "2026-10-05T06:30Z", "end": "2026-10-06T07:15Z", "family": "Thermal displacement", "description": "Daytime thermal cycle (05/10): from the morning, the pan and the tilt of the camera drop and its scale rises, then they slowly come back in the afternoon, the evening and all night, until the start of the next morning. The corrected curves follow the same cycle, poorly compensated: corr_x of P7, P5, P6 and corr_y of P5, P6, P7, P4 move away from their night level during the day then come back, partly all at once at nightfall, when the recognition error also comes back (the lighting plays a part). Deduced cause: the camera and its mount move with the heat of the day (camera pose); the structure, a masonry wall, is not supposed to move like that. No temperature is available to confirm it. Normal, nothing to do.", "review": "2026-11-17"}
{"id": "SNCF01-11", "start": "2026-10-05T07:00Z", "end": "2026-10-05T16:45Z", "family": "Visibility", "description": "By day (05/10): the corrected curves of all targets fluctuate much more than at night, from one measurement to the next, especially CV.2, CV.4, F4.2, BG.3, CV.6, CV.9, with one-measurement jumps that come back at once, and CV.2, CV.4 (sometimes F4.2) are rejected at times, their curves having gaps; their recognition error varies strongly by day. At night everything becomes calm again. Deduced cause: heat shimmer from the air heated above the tracks (a fast noise over the whole scene, by day only), not visible on the images; the rejections of CV.2 and CV.4, low targets, may also come from passages, not seen. Do not trust the small movements of these curves by day; this is not a movement of the structure.", "review": "2026-11-17"}
{"id": "SNCF01-12", "start": "2026-10-05T15:45Z", "end": "2026-10-05T16:15Z", "family": "Obstruction", "description": "One single measurement: most targets (the CV, the F4 and some of the P) are rejected and their curves are missing; the references are affected too (BG.3.1 and R1 rejected), the compensation retains none of them, and the targets that stayed under the threshold (BG.2, BG.3, F4.5 and some P) jump in corr_x and corr_y for the time of the measurement. Everything comes back at the next measurement. Cause: a passage in front of the targets and the references, a train passing, blurred, in front of the wall and the targets, seen on the 16:00 image. The structure is not moving: point to ignore, nothing to do.", "review": "2026-11-17"}
{"id": "SNCF01-13", "start": "2026-10-06T06:30Z", "end": "2026-10-06T07:00Z", "family": "Obstruction", "description": "The CV targets (CV.1, CV.2, CV.4, CV.5, CV.6, CV.8, CV.9) and F4.2 are rejected together for the time of one measurement, their curves are missing; the references hold (BG.3.1 rises just under its threshold), the other targets do not move. Cause: probably a passage in front of this part of the scene, deduced from the signature (no image at that moment). The structure is not moving: point to ignore, nothing to do.", "review": "2026-11-17"}
{"id": "SNCF01-14", "start": "2026-10-06T07:15Z", "end": "2026-10-06T14:30Z", "family": "Visibility", "description": "By day (06/10): the corrected curves of all targets fluctuate much more than at night, from one measurement to the next, especially CV.2, CV.4, F4.2, BG.3, CV.6, CV.9, with one-measurement jumps that come back at once, and CV.2, CV.4 (sometimes F4.2) are rejected at times, their curves having gaps; their recognition error varies strongly by day. At night everything becomes calm again. Deduced cause: heat shimmer from the air heated above the tracks (a fast noise over the whole scene, by day only), not visible on the images; the rejections of CV.2 and CV.4, low targets, may also come from passages, not seen. Do not trust the small movements of these curves by day; this is not a movement of the structure.", "review": "2026-11-17"}
{"id": "SNCF01-15", "start": "2026-10-06T07:15Z", "end": "2026-10-07T00:00Z", "family": "Thermal displacement", "description": "Daytime thermal cycle (06/10): from the morning, the pan and the tilt of the camera drop and its scale rises, then they slowly come back in the afternoon, the evening and the evening. The corrected curves follow the same cycle, poorly compensated: corr_x of P7, P5, P6 and corr_y of P5, P6, P7, P4 move away from their night level during the day then come back, partly all at once at nightfall, when the recognition error also comes back (the lighting plays a part). Deduced cause: the camera and its mount move with the heat of the day (camera pose); the structure, a masonry wall, is not supposed to move like that. No temperature is available to confirm it. Normal, nothing to do.", "review": "2026-11-17"}
{"id": "SNCF01-16", "start": "2026-10-07T07:30Z", "end": "2026-10-07T21:00Z", "family": "Thermal displacement", "description": "Daytime thermal cycle (07/10): from the morning, the pan and the tilt of the camera drop and its scale rises, then they slowly come back in the afternoon, the evening and the evening. The corrected curves follow the same cycle, poorly compensated: corr_x of P7, P5, P6 and corr_y of P5, P6, P7, P4 move away from their night level during the day then come back, partly all at once at nightfall, when the recognition error also comes back (the lighting plays a part). Deduced cause: the camera and its mount move with the heat of the day (camera pose); the structure, a masonry wall, is not supposed to move like that. No temperature is available to confirm it. Normal, nothing to do.", "review": "2026-11-17"}
{"id": "SNCF01-17", "start": "2026-10-07T12:45Z", "end": "2026-10-07T13:15Z", "family": "Obstruction", "description": "One single measurement: most targets (the CV, the F4 and some of the P) are rejected and their curves are missing; the references are affected too (R1 rejected), the compensation retains none of them; the targets that stayed under the threshold barely move. Everything comes back at the next measurement. Cause: a passage in front of the targets and the references, a train passing in front of the targets, seen on the 13:00 image. The structure is not moving: point to ignore, nothing to do.", "review": "2026-11-17"}
{"id": "SNCF01-18", "start": "2026-10-07T15:45Z", "end": "2026-10-07T16:15Z", "family": "Obstruction", "description": "One single measurement: most targets (the CV, the F4 and some of the P) are rejected and their curves are missing; the references are affected too (BG.3.1 and R1 rejected), the compensation retains none of them, and the targets that stayed under the threshold (BG.2, BG.3, F4.5 and some P) jump in corr_x and corr_y for the time of the measurement. Everything comes back at the next measurement. Cause: a passage in front of the targets and the references, a train passing in front of the targets, seen on the 16:00 image. The structure is not moving: point to ignore, nothing to do.", "review": "2026-11-17"}
{"id": "SNCF01-19", "start": "2026-10-07T19:30Z", "end": "2026-10-07T20:00Z", "family": "Obstruction", "description": "One single measurement: most targets (the CV, the F4 and some of the P) are rejected and their curves are missing; the references are affected too (BG.3.1 rejected), the compensation retains none of them, and the targets that stayed under the threshold (BG.2, BG.3, F4.5 and some P) jump in corr_x and corr_y for the time of the measurement. Everything comes back at the next measurement. Cause: a passage in front of the targets and the references, no image at that moment; deduced from the signature, the same as that of the trains seen on the images of the other passages. The structure is not moving: point to ignore, nothing to do.", "review": "2026-11-17"}
{"id": "SNCF01-20", "start": "2026-10-08T06:45Z", "end": "2026-10-08T16:30Z", "family": "Visibility", "description": "By day (08/10): the corrected curves of all targets fluctuate much more than at night, from one measurement to the next, especially CV.2, CV.4, F4.2, BG.3, CV.6, CV.9, with one-measurement jumps that come back at once, and CV.2, CV.4 (sometimes F4.2) are rejected at times, their curves having gaps; their recognition error varies strongly by day. At night everything becomes calm again. Deduced cause: heat shimmer from the air heated above the tracks (a fast noise over the whole scene, by day only), not visible on the images; the rejections of CV.2 and CV.4, low targets, may also come from passages, not seen. Do not trust the small movements of these curves by day; this is not a movement of the structure.", "review": "2026-11-17"}
{"id": "SNCF01-21", "start": "2026-10-08T08:15Z", "end": "2026-10-09T04:30Z", "family": "Thermal displacement", "description": "Daytime thermal cycle (08/10), weak by day and prolonged at night: from the morning, the pan and the tilt of the camera drop a little and its scale rises; in the evening, the camera rises beyond its position of the previous night and comes back to it only on the morning of the 9th. The corrected curves follow, poorly compensated: corr_y of P5, P6, P7, P4 moves away from its night level during the day; in the evening and at night, corr_x of P1, P5, P6, P7 exceeds its level of the previous night in the other direction, until the morning of the 9th. Deduced cause: the camera and its mount move with the heat of the day (camera pose); the structure, a masonry wall, is not supposed to move like that. No temperature is available to confirm it. Normal, nothing to do.", "review": "2026-11-17"}
{"id": "SNCF01-22", "start": "2026-10-09T01:45Z", "end": "2026-10-09T02:15Z", "family": "No data", "description": "One measurement is missing, for all sensors, around two in the morning: all curves have a gap; no image at that moment. The power metrics of the station are empty over the whole month. This one-measurement night gap, around 02:00 UTC, falls at the same measurement on FLORIDA and SNCF01 on 09, 14 and 15/10, and only on them; other stations have the same night gap around the same hour on other weeks (JUNGFRAU and NORDEND in early September): a common cause outside the station, at night, is probable; it is not established. Nothing to do on the station if it does not get worse.", "review": "2026-11-17"}
{"id": "SNCF01-23", "start": "2026-10-09T07:00Z", "end": "2026-10-10T06:00Z", "family": "Thermal displacement", "description": "Daytime thermal cycle (09/10), with no return in the evening: in the morning, the pan and the tilt of the camera drop and its scale rises, then the camera stays in that position all afternoon and evening; it comes back only slowly during the night, on the morning of the 10th. The corrected curves follow, poorly compensated: corr_x of P1, P2, P5, P6, P7 moves away from its night level during the day, stays away in the evening and comes back only on the morning of the 10th. Deduced cause: the camera and its mount move with the heat of the day (camera pose); the structure, a masonry wall, is not supposed to move like that. No temperature is available to confirm it. Normal, nothing to do.", "review": "2026-11-17"}
{"id": "SNCF01-24", "start": "2026-10-09T09:15Z", "end": "2026-10-09T12:45Z", "family": "Visibility", "description": "By day (09/10), less marked than on the other days: CV.2 is rejected for one measurement in the morning, its curve having a gap, and the corrected curves of CV.2, CV.4, F4.2, BG.3, CV.6 fluctuate a little in late morning. Same daytime heat shimmer as on the other days, weaker: deduced cause, the air heated above the tracks, not visible on the images. Do not trust the small movements of these curves; this is not a movement of the structure.", "review": "2026-11-17"}
{"id": "SNCF01-25", "start": "2026-10-10T01:45Z", "end": "2026-10-10T02:15Z", "family": "No data", "description": "One measurement is missing, for all sensors, around two in the morning: all curves have a gap; the image of that moment exists nonetheless. The power metrics of the station are empty over the whole month. This one-measurement night gap, around 02:00 UTC, falls at the same measurement on FLORIDA and SNCF01 on 09, 14 and 15/10, and only on them (that night, on SNCF01 alone); other stations have the same night gap around the same hour on other weeks (JUNGFRAU and NORDEND in early September): a common cause outside the station, at night, is probable; it is not established. Nothing to do on the station if it does not get worse.", "review": "2026-11-17"}
{"id": "SNCF01-26", "start": "2026-10-10T07:00Z", "end": "2026-10-11T08:30Z", "family": "Thermal displacement", "description": "Daytime thermal cycle (10/10): from the morning, the pan and the tilt of the camera drop and its scale rises, then they slowly come back in the afternoon, the evening and all night, until the start of the next morning. The corrected curves follow the same cycle, poorly compensated: corr_x of P7, P5, P6 and corr_y of P5, P6, P7, P4 move away from their night level during the day then come back, partly all at once at nightfall, when the recognition error also comes back (the lighting plays a part). Deduced cause: the camera and its mount move with the heat of the day (camera pose); the structure, a masonry wall, is not supposed to move like that. No temperature is available to confirm it. Normal, nothing to do.", "review": "2026-11-17"}
{"id": "SNCF01-27", "start": "2026-10-10T07:15Z", "end": "2026-10-10T14:15Z", "family": "Visibility", "description": "By day (10/10): the corrected curves of all targets fluctuate much more than at night, from one measurement to the next, especially CV.2, CV.4, F4.2, BG.3, CV.6, CV.9, with one-measurement jumps that come back at once, and CV.2, CV.4 (sometimes F4.2) are rejected at times, their curves having gaps; their recognition error varies strongly by day. At night everything becomes calm again. Deduced cause: heat shimmer from the air heated above the tracks (a fast noise over the whole scene, by day only), not visible on the images; the rejections of CV.2 and CV.4, low targets, may also come from passages, not seen. Do not trust the small movements of these curves by day; this is not a movement of the structure.", "review": "2026-11-17"}
{"id": "SNCF01-28", "start": "2026-10-11T08:15Z", "end": "2026-10-11T16:00Z", "family": "Visibility", "description": "By day (11/10): the corrected curves of all targets fluctuate much more than at night, from one measurement to the next, especially CV.2, CV.4, F4.2, BG.3, CV.6, CV.9, with one-measurement jumps that come back at once, and CV.2, CV.4 (sometimes F4.2) are rejected at times, their curves having gaps; their recognition error varies strongly by day. At night everything becomes calm again. Deduced cause: heat shimmer from the air heated above the tracks (a fast noise over the whole scene, by day only), not visible on the images; the rejections of CV.2 and CV.4, low targets, may also come from passages, not seen. Do not trust the small movements of these curves by day; this is not a movement of the structure.", "review": "2026-11-17"}
{"id": "SNCF01-29", "start": "2026-10-11T08:30Z", "end": "2026-10-12T00:00Z", "family": "Thermal displacement", "description": "Daytime thermal cycle (11/10): from the morning, the pan and the tilt of the camera drop and its scale rises, then they slowly come back in the afternoon, the evening and the evening. The corrected curves follow the same cycle, poorly compensated: corr_x of P7, P5, P6 and corr_y of P5, P6, P7, P4 move away from their night level during the day then come back, partly all at once at nightfall, when the recognition error also comes back (the lighting plays a part). Deduced cause: the camera and its mount move with the heat of the day (camera pose); the structure, a masonry wall, is not supposed to move like that. No temperature is available to confirm it. Normal, nothing to do.", "review": "2026-11-17"}
{"id": "SNCF01-30", "start": "2026-10-11T14:00Z", "end": "2026-10-11T14:30Z", "family": "Obstruction", "description": "One single measurement: most targets (the CV, the F4 and some of the P) are rejected and their curves are missing; the references are affected too (BG.3.1 and R1 rejected), the compensation retains none of them, and the targets that stayed under the threshold (BG.2, BG.3, F4.5 and some P) jump in corr_x and corr_y for the time of the measurement. Everything comes back at the next measurement. Cause: a passage in front of the targets and the references, no image at that moment; deduced from the signature, the same as that of the trains seen on the images of the other passages. The structure is not moving: point to ignore, nothing to do.", "review": "2026-11-17"}
{"id": "SNCF01-31", "start": "2026-10-12T06:30Z", "end": "2026-10-12T07:00Z", "family": "Obstruction", "description": "CV.8 and F4.2 go just above the threshold for the time of one measurement, their curves are missing; nothing else moves. Cause not established (no image at that moment); perhaps a partial passage. The structure is not moving: point to ignore, nothing to do.", "review": "2026-11-17"}
{"id": "SNCF01-32", "start": "2026-10-12T07:00Z", "end": "2026-10-12T16:15Z", "family": "Visibility", "description": "By day (12/10): the corrected curves of all targets fluctuate much more than at night, from one measurement to the next, especially CV.2, CV.4, F4.2, BG.3, CV.6, CV.9, with one-measurement jumps that come back at once, and CV.2, CV.4 (sometimes F4.2) are rejected at times, their curves having gaps; their recognition error varies strongly by day. At night everything becomes calm again. Deduced cause: heat shimmer from the air heated above the tracks (a fast noise over the whole scene, by day only), not visible on the images; the rejections of CV.2 and CV.4, low targets, may also come from passages, not seen. Do not trust the small movements of these curves by day; this is not a movement of the structure.", "review": "2026-11-17"}
{"id": "SNCF01-33", "start": "2026-10-12T08:00Z", "end": "2026-10-14T04:00Z", "family": "Thermal displacement", "description": "Thermal cycle of 12 and 13/10, as one single episode: on the 12th, from the morning, the pan and the tilt of the camera drop and its scale rises; during the night from 12 to 13, the camera comes back only in part, and the corrected curves do not come back: corr_x of P1, P5, P6, P7 and corr_y of P4, P5, P6, P7 stay away from their night level all night, while the recognition error of the P rises a little; on the 13th, a second daytime dip is added to it, then everything comes back on the evening of the 13th and during the night, on the morning of the 14th. Deduced cause: the camera and its mount move with the heat of the day (camera pose); the night without return is not explained, no temperature being available. Nothing to do.", "review": "2026-11-17"}
{"id": "SNCF01-34", "start": "2026-10-12T15:45Z", "end": "2026-10-12T16:15Z", "family": "Obstruction", "description": "One single measurement: most targets (the CV, the F4 and some of the P) are rejected and their curves are missing; the references are affected too (BG.3.1 and R1 rejected), the compensation retains none of them, and the targets that stayed under the threshold (BG.2, BG.3, F4.5 and some P) jump in corr_x and corr_y for the time of the measurement. Everything comes back at the next measurement. Cause: a passage in front of the targets and the references, a train passing in front of the targets, seen on the 16:00 image. The structure is not moving: point to ignore, nothing to do.", "review": "2026-11-17"}
{"id": "SNCF01-35", "start": "2026-10-13T01:45Z", "end": "2026-10-13T02:15Z", "family": "No data", "description": "One measurement is missing, for all sensors, around two in the morning: all curves have a gap; no image at that moment. The power metrics of the station are empty over the whole month. This one-measurement night gap, around 02:00 UTC, falls at the same measurement on FLORIDA and SNCF01 on 09, 14 and 15/10, and only on them (that night, on SNCF01 alone); other stations have the same night gap around the same hour on other weeks (JUNGFRAU and NORDEND in early September): a common cause outside the station, at night, is probable; it is not established. Nothing to do on the station if it does not get worse.", "review": "2026-11-17"}
{"id": "SNCF01-36", "start": "2026-10-13T08:30Z", "end": "2026-10-13T14:30Z", "family": "Visibility", "description": "By day (13/10): the corrected curves of all targets fluctuate much more than at night, from one measurement to the next, especially CV.2, CV.4, F4.2, BG.3, CV.6, CV.9, with one-measurement jumps that come back at once, and CV.2, CV.4 (sometimes F4.2) are rejected at times, their curves having gaps; their recognition error varies strongly by day. At night everything becomes calm again. Deduced cause: heat shimmer from the air heated above the tracks (a fast noise over the whole scene, by day only), not visible on the images; the rejections of CV.2 and CV.4, low targets, may also come from passages, not seen. Do not trust the small movements of these curves by day; this is not a movement of the structure.", "review": "2026-11-17"}
{"id": "SNCF01-37", "start": "2026-10-14T01:15Z", "end": "2026-10-14T01:45Z", "family": "No data", "description": "One measurement is missing, for all sensors, around two in the morning: all curves have a gap. The power metrics of the station are empty over the whole month. This one-measurement night gap, around 02:00 UTC, falls at the same measurement on FLORIDA and SNCF01 on 09, 14 and 15/10, and only on them; other stations have the same night gap around the same hour on other weeks (JUNGFRAU and NORDEND in early September): a common cause outside the station, at night, is probable; it is not established. Nothing to do on the station if it does not get worse.", "review": "2026-11-17"}
{"id": "SNCF01-38", "start": "2026-10-14T06:45Z", "end": "2026-10-14T16:45Z", "family": "Visibility", "description": "By day (14/10): the corrected curves of all targets fluctuate much more than at night, from one measurement to the next, especially CV.2, CV.4, F4.2, BG.3, CV.6, CV.9, with one-measurement jumps that come back at once, and CV.2, CV.4 (sometimes F4.2) are rejected at times, their curves having gaps; their recognition error varies strongly by day. At night everything becomes calm again. Deduced cause: heat shimmer from the air heated above the tracks (a fast noise over the whole scene, by day only), not visible on the images; the rejections of CV.2 and CV.4, low targets, may also come from passages, not seen. Do not trust the small movements of these curves by day; this is not a movement of the structure.", "review": "2026-11-17"}
{"id": "SNCF01-39", "start": "2026-10-14T07:15Z", "end": "2026-10-15T01:15Z", "family": "Thermal displacement", "description": "Daytime thermal cycle (14/10): from the morning, the pan and the tilt of the camera drop and its scale rises, then they slowly come back in the afternoon, the evening and the night, until the camera comes to rest around one in the morning; the two-in-the-morning gap and the camera jump of the early morning, labelled separately, come after this rest. The corrected curves follow the same cycle, poorly compensated: corr_x of P7, P5, P6 and corr_y of P5, P6, P7, P4 move away from their night level during the day then come back, partly all at once at nightfall, when the recognition error also comes back (the lighting plays a part). Deduced cause: the camera and its mount move with the heat of the day (camera pose); the structure, a masonry wall, is not supposed to move like that. No temperature is available to confirm it. Normal, nothing to do.", "review": "2026-11-17"}
{"id": "SNCF01-40", "start": "2026-10-14T10:30Z", "end": "2026-10-14T11:00Z", "family": "Obstruction", "description": "CV.2, CV.4 and CV.8 are rejected for the time of one measurement, their curves are missing, and CV.6, F4.2, F4.6 make a small corr jump that comes back at the next measurement. Cause: probably a passage in front of this part of the scene, deduced from the signature (no image at that moment). The structure is not moving: point to ignore, nothing to do.", "review": "2026-11-17"}
{"id": "SNCF01-41", "start": "2026-10-15T01:45Z", "end": "2026-10-15T02:45Z", "family": "No data", "description": "Two measurements are missing half an hour apart, with a single measurement between them, for all sensors, around two in the morning: all curves have a gap; the image of two o'clock exists nonetheless. The power metrics of the station are empty over the whole month. This one-measurement night gap, around 02:00 UTC, falls at the same measurement on FLORIDA and SNCF01 on 09, 14 and 15/10, and only on them; other stations have the same night gap around the same hour on other weeks (JUNGFRAU and NORDEND in early September): a common cause outside the station, at night, is probable; it is not established. Nothing to do on the station if it does not get worse.", "review": "2026-11-17"}
{"id": "SNCF01-42", "start": "2026-10-15T05:15Z", "end": "2026-10-15T05:45Z", "family": "Displacement", "description": "One-measurement jump that lasts: on the 15th in the early morning, from one measurement to the next, the raw positions of all sensors, references included, jump together in the image (the tilt of the camera makes a step, which the pose then keeps), and the recognition error of P4, P7 and of the references R1, R2 goes up a notch. The compensation does not absorb it entirely: corr_y of P4, P5, P7, CV.1 and of the reference R1 drops at once, that of R2 rises, and these levels mostly remain on the following days. No image at that moment; cause not established (a jolt of the camera or of its mount, deduced from the pose). Relative to the overall movement, the targets move together with the camera, without moving relative to one another; the references R1 and R2 do not quite follow it, hence the remainder on the corrected curves. This is not an established movement of the structure: to be watched, on the camera and mount side.", "review": "2026-11-17"}
{"id": "SNCF01-43", "start": "2026-10-15T08:15Z", "end": "2026-10-15T15:45Z", "family": "Visibility", "description": "By day (15/10): the corrected curves of all targets fluctuate much more than at night, from one measurement to the next, especially CV.2, CV.4, F4.2, BG.3, CV.6, CV.9, with one-measurement jumps that come back at once, and CV.2, CV.4 (sometimes F4.2) are rejected at times, their curves having gaps; their recognition error varies strongly by day. At night everything becomes calm again. Deduced cause: heat shimmer from the air heated above the tracks (a fast noise over the whole scene, by day only), not visible on the images; the rejections of CV.2 and CV.4, low targets, may also come from passages, not seen. Do not trust the small movements of these curves by day; this is not a movement of the structure.", "review": "2026-11-17"}
{"id": "SNCF01-44", "start": "2026-10-15T08:45Z", "end": "2026-10-15T22:45Z", "family": "Thermal displacement", "description": "Daytime thermal cycle (15/10): from the morning, the pan and the tilt of the camera drop and its scale rises, then they slowly come back in the afternoon and the evening; the night outage falls before the return. The corrected curves follow the same cycle, poorly compensated: corr_x of P7, P5, P6 and corr_y of P5, P6, P7, P4 move away from their night level during the day then come back, partly all at once at nightfall, when the recognition error also comes back (the lighting plays a part). Deduced cause: the camera and its mount move with the heat of the day (camera pose); the structure, a masonry wall, is not supposed to move like that. No temperature is available to confirm it. Normal, nothing to do.", "review": "2026-11-17"}
{"id": "SNCF01-45", "start": "2026-10-15T22:45Z", "end": "2026-10-16T04:00Z", "family": "No data", "description": "No measurement for any sensor for several hours, on the night of 15 to 16, all curves are missing; no image either. The power metrics of the station are empty over the whole month. The gap starts at the same hour, around 23:00, on the nine stations that were measuring then (LENZSPITZE has its first measurements only in the middle of that night, WILDSTRUBEL is already stopped), and their metrics stop at the same time on most of them; measurements and metrics resume at different hours depending on the station, most in late morning. JUNGFRAU, whose metrics continue, accumulates unsent entries all night, sent in late morning, and its night measurements are nonetheless missing from the data: a common cause outside the stations (transmission or reception of the data), not an outage of the stations; it is not established. The curves are missing over the range; nothing to do on the station if it does not repeat.", "review": "2026-11-17"}
{"id": "SNCF01-46", "start": "2026-10-16T07:00Z", "end": "2026-10-17T07:30Z", "family": "Thermal displacement", "description": "Daytime thermal cycle (16/10): from the morning, the pan and the tilt of the camera drop and its scale rises, then they slowly come back in the afternoon, the evening and all night, until the start of the next morning. The corrected curves follow the same cycle, poorly compensated: corr_x of P7, P5, P6 and corr_y of P5, P6, P7, P4 move away from their night level during the day then come back, partly all at once at nightfall, when the recognition error also comes back (the lighting plays a part). Deduced cause: the camera and its mount move with the heat of the day (camera pose); the structure, a masonry wall, is not supposed to move like that. No temperature is available to confirm it. Normal, nothing to do.", "review": "2026-11-17"}
{"id": "SNCF01-47", "start": "2026-10-16T08:15Z", "end": "2026-10-16T13:30Z", "family": "Visibility", "description": "By day (16/10): the corrected curves of all targets fluctuate much more than at night, from one measurement to the next, especially CV.2, CV.4, F4.2, BG.3, CV.6, CV.9, with one-measurement jumps that come back at once, and CV.2, CV.4 (sometimes F4.2) are rejected at times, their curves having gaps; their recognition error varies strongly by day. At night everything becomes calm again. Deduced cause: heat shimmer from the air heated above the tracks (a fast noise over the whole scene, by day only), not visible on the images; the rejections of CV.2 and CV.4, low targets, may also come from passages, not seen. Do not trust the small movements of these curves by day; this is not a movement of the structure.", "review": "2026-11-17"}
{"id": "SNCF01-48", "start": "2026-10-16T11:30Z", "end": "2026-10-16T12:00Z", "family": "Obstruction", "description": "CV.4 makes a very large jump in corr_x and corr_y for the time of one measurement, its raw position jumping by several pixels, while CV.2 is rejected; everything comes back at the next measurement. Cause: probably a passage hiding these low targets, the system locking onto another spot; deduced (no image at that moment). The structure is not moving: point to ignore, nothing to do.", "review": "2026-11-17"}
{"id": "SNCF01-49", "start": "2026-10-16T13:30Z", "end": "2026-10-16T14:00Z", "family": "No data", "description": "One measurement is missing for all sensors, all curves have a gap; no image at that moment. The power metrics of the station are empty over the whole month. The same gap occurs at the same time on the other stations that measure at that time (FLORIDA, JUNGFRAU, NORDEND): a common cause outside the station (transmission or reception of the data), not a station failure; it is not established. The curves are missing over the range; nothing to do on the station.", "review": "2026-11-17"}
{"id": "SNCF01-50", "start": "2026-10-16T14:15Z", "end": "2026-10-16T14:45Z", "family": "No data", "description": "One measurement is missing for all sensors, all curves have a gap; no image at that moment. The power metrics of the station are empty over the whole month. The same gap occurs at the same time on the other stations that measure at that time (CLARIDEN, FLORIDA, LENZSPITZE, NORDEND): a common cause outside the station (transmission or reception of the data), not a station failure; it is not established. The curves are missing over the range; nothing to do on the station.", "review": "2026-11-17"}
{"id": "SNCF01-51", "start": "2026-10-16T15:45Z", "end": "2026-10-16T16:15Z", "family": "Obstruction", "description": "One single measurement: most targets (the CV, the F4 and some of the P) are rejected and their curves are missing; the references are affected too (BG.3.1 and R1 rejected), the compensation retains none of them, and the targets that stayed under the threshold (BG.2, BG.3, F4.5 and some P) jump in corr_x and corr_y for the time of the measurement. Everything comes back at the next measurement. Cause: a passage in front of the targets and the references, a train passing in front of the targets, seen on the 16:00 image. The structure is not moving: point to ignore, nothing to do.", "review": "2026-11-17"}
{"id": "SNCF01-52", "start": "2026-10-17T07:30Z", "end": "2026-10-18T07:45Z", "family": "Thermal displacement", "description": "Daytime thermal cycle (17/10): from the morning, the pan and the tilt of the camera drop and its scale rises, then they slowly come back in the afternoon, the evening and all night, until the start of the next morning; the rejections of F4.2 that night, labelled separately, do not affect the references and do not distort the pose. The corrected curves follow the same cycle, poorly compensated: corr_x of P7, P5, P6 and corr_y of P5, P6, P7, P4 move away from their night level during the day then come back, partly all at once at nightfall, when the recognition error also comes back (the lighting plays a part). Deduced cause: the camera and its mount move with the heat of the day (camera pose); the structure, a masonry wall, is not supposed to move like that. No temperature is available to confirm it. Normal, nothing to do.", "review": "2026-11-17"}
{"id": "SNCF01-53", "start": "2026-10-17T08:00Z", "end": "2026-10-17T16:45Z", "family": "Visibility", "description": "By day (17/10): the corrected curves of all targets fluctuate much more than at night, from one measurement to the next, especially CV.2, CV.4, F4.2, BG.3, CV.6, CV.9, with one-measurement jumps that come back at once, and CV.2, CV.4 (sometimes F4.2) are rejected at times, their curves having gaps; their recognition error varies strongly by day. At night everything becomes calm again. Deduced cause: heat shimmer from the air heated above the tracks (a fast noise over the whole scene, by day only), not visible on the images; the rejections of CV.2 and CV.4, low targets, may also come from passages, not seen. Do not trust the small movements of these curves by day; this is not a movement of the structure.", "review": "2026-11-17"}
{"id": "SNCF01-54", "start": "2026-10-17T09:45Z", "end": "2026-10-17T10:15Z", "family": "Obstruction", "description": "CV.2 makes a very large jump in corr_x and corr_y for the time of one measurement, its raw position jumping by several pixels: another spot was taken for the target; CV.4 is rejected; everything comes back at the next measurement. Cause: a blurry, bright object passes in front of the bottom of the scene and hides CV.2 and CV.1, seen on the 10:00 image (thumbnails). The structure is not moving: point to ignore, nothing to do.", "review": "2026-11-17"}
{"id": "SNCF01-55", "start": "2026-10-17T20:00Z", "end": "2026-10-18T08:30Z", "family": "Visibility", "description": "At night, F4.2 is rejected at times (its recognition error rises to the threshold) and its curve has gaps; the recognition error of P2 and of a few other targets also rises a little, without affecting their curves. Cause not established (night images with no visible obstacle); visibility a little worse at night. Do not trust the curve of F4.2 over the range; the structure is not moving.", "review": "2026-11-17"}
{"id": "SNCF01-56", "start": "2026-10-18T07:45Z", "end": "2026-10-19T00:00Z", "family": "Thermal displacement", "description": "Daytime thermal cycle (18/10): from the morning, the pan and the tilt of the camera drop and its scale rises, then they slowly come back in the afternoon, the evening and the evening. The corrected curves follow the same cycle, poorly compensated: corr_x of P7, P5, P6 and corr_y of P5, P6, P7, P4 move away from their night level during the day then come back, partly all at once at nightfall, when the recognition error also comes back (the lighting plays a part). Deduced cause: the camera and its mount move with the heat of the day (camera pose); the structure, a masonry wall, is not supposed to move like that. No temperature is available to confirm it. Normal, nothing to do.", "review": "2026-11-17"}
{"id": "SNCF01-57", "start": "2026-10-18T08:00Z", "end": "2026-10-18T15:45Z", "family": "Visibility", "description": "By day (18/10): the corrected curves of all targets fluctuate much more than at night, from one measurement to the next, especially CV.2, CV.4, F4.2, BG.3, CV.6, CV.9, with one-measurement jumps that come back at once, and CV.2, CV.4 (sometimes F4.2) are rejected at times, their curves having gaps; their recognition error varies strongly by day. At night everything becomes calm again. Deduced cause: heat shimmer from the air heated above the tracks (a fast noise over the whole scene, by day only), not visible on the images; the rejections of CV.2 and CV.4, low targets, may also come from passages, not seen. Do not trust the small movements of these curves by day; this is not a movement of the structure.", "review": "2026-11-17"}
{"id": "SNCF01-58", "start": "2026-10-18T17:00Z", "end": "2026-10-19T08:30Z", "family": "Visibility", "description": "The following night, again, F4.2 is rejected at times and its curve has gaps; the recognition error of P2 and of a few other targets rises a little. Cause not established; visibility a little worse at night. Do not trust the curve of F4.2 over the range; the structure is not moving.", "review": "2026-11-17"}
{"id": "SNCF01-59", "start": "2026-10-18T20:00Z", "end": "2026-10-18T20:30Z", "family": "Obstruction", "description": "One single measurement: most targets (the CV, the F4 and some of the P) are rejected and their curves are missing; the references are affected too (BG.3.1 and R1 rejected), the compensation retains none of them, and the targets that stayed under the threshold (BG.2, BG.3, F4.5 and some P) jump in corr_x and corr_y for the time of the measurement. Everything comes back at the next measurement. Cause: a passage in front of the targets and the references, no image at that moment; deduced from the signature, the same as that of the trains seen on the images of the other passages. The structure is not moving: point to ignore, nothing to do.", "review": "2026-11-17"}
{"id": "SNCF01-60", "start": "2026-10-19T07:15Z", "end": "2026-10-20T12:45Z", "family": "Thermal displacement", "description": "Daytime thermal cycle (19/10), with no return: in the morning, the pan and the tilt of the camera drop and its scale rises, then the camera stays in that position in the afternoon and at night. The corrected curves move away from their night level during the day and keep moving away in the evening and at night, with the camera still: corr_x of P5, P6, P7 rises, that of P2 drops; the recognition error of the P and of the reference R1 rises a little at nightfall. No return before the outage of the 20th in early afternoon. Deduced cause for the morning: the camera and its mount move with the heat of the day (camera pose); what follows, with the camera still, is not explained. No temperature is available. Nothing to do, but do not read the levels of P2, P5, P6, P7 of the night from 19 to 20 as a movement.", "review": "2026-11-17"}
{"id": "SNCF01-61", "start": "2026-10-19T09:00Z", "end": "2026-10-19T10:15Z", "family": "No data", "description": "Several consecutive measurements are missing for all sensors, for an hour, all curves are missing; no image either. The power metrics of the station are empty over the whole month. The same gap occurs at the same time on the other stations that measure at that time (CLARIDEN, FLORIDA, JUNGFRAU, LENZSPITZE, NIEDERHORN, NORDEND): a common cause outside the station (transmission or reception of the data), not a station failure; it is not established. The curves are missing over the range; nothing to do on the station.", "review": "2026-11-17"}
{"id": "SNCF01-62", "start": "2026-10-19T13:30Z", "end": "2026-10-19T14:00Z", "family": "Visibility", "description": "F4.2 is rejected for the time of one measurement, its recognition error just above its threshold, then comes back; the other targets stay at their usual level. F4.2 lives just under its threshold throughout the batch, like CV.2, CV.8 and CV.9, and crosses it now and then: cause not established. Point to ignore, nothing to do.", "review": "2026-11-17"}
{"id": "SNCF01-63", "start": "2026-10-19T20:45Z", "end": "2026-10-19T21:15Z", "family": "No data", "description": "One measurement is missing for all sensors, all curves have a gap; no image at that moment. The power metrics of the station are empty over the whole month. The same gap occurs at the same time on the other stations that measure at that time (CLARIDEN, FLORIDA, JUNGFRAU, LENZSPITZE, NIEDERHORN, NORDEND): a common cause outside the station (transmission or reception of the data), not a station failure; it is not established. The curves are missing over the range; nothing to do on the station. The hourly metrics of BREITHORN, MICHIGAN and NEBRASKA are also missing at 21:00.", "review": "2026-11-17"}
{"id": "SNCF01-64", "start": "2026-10-20T05:30Z", "end": "2026-10-20T06:00Z", "family": "Obstruction", "description": "One single measurement: most targets (the CV, the F4 and some of the P) are rejected and their curves are missing; the references are affected too (BG.3.1 and R1 rejected), the compensation retains none of them, and the targets that stayed under the threshold (BG.2, BG.3, F4.5 and some P) jump in corr_x and corr_y for the time of the measurement. Everything comes back at the next measurement. Cause: a passage in front of the targets and the references, no image at that moment; deduced from the signature, the same as that of the trains seen on the images of the other passages. The structure is not moving: point to ignore, nothing to do.", "review": "2026-11-17"}
{"id": "SNCF01-65", "start": "2026-10-20T06:45Z", "end": "2026-10-20T09:15Z", "family": "Visibility", "description": "In early morning, F4.2 is rejected for two hours, its curve is missing; CV.6 is too, and the recognition error of P2, P3 has been rising since the previous evening. Cause not established; worse visibility. Do not trust the curve of F4.2; the structure is not moving.", "review": "2026-11-17"}
{"id": "SNCF01-66", "start": "2026-10-20T12:45Z", "end": "2026-10-21T10:00Z", "family": "No data", "description": "Measurements are missing intermittently, then an outage of about twenty hours. No measurement for any sensor, all curves are missing; no image either. The power metrics of the station are empty over the whole month: the cause is not established (acquisition, power or transmission). If long outages repeat, check the power and the transmission of the station.", "review": "2026-11-17"}
{"id": "SNCF01-67", "start": "2026-10-21T10:00Z", "end": "2026-10-21T15:45Z", "family": "Visibility", "description": "By day (21/10): the corrected curves of all targets fluctuate much more than at night, from one measurement to the next, especially CV.2, CV.4, F4.2, BG.3, CV.6, CV.9, with one-measurement jumps that come back at once, and CV.2, CV.4 (sometimes F4.2) are rejected at times, their curves having gaps; their recognition error varies strongly by day. At night everything becomes calm again. Deduced cause: heat shimmer from the air heated above the tracks (a fast noise over the whole scene, by day only), not visible on the images; the rejections of CV.2 and CV.4, low targets, may also come from passages, not seen. Do not trust the small movements of these curves by day; this is not a movement of the structure.", "review": "2026-11-17"}
{"id": "SNCF01-68", "start": "2026-10-21T10:00Z", "end": "2026-10-21T19:30Z", "family": "Thermal displacement", "description": "Daytime thermal cycle (21/10), between two measurement outages: in the morning, the pan of the camera drops and its scale rises, then the camera comes back in the afternoon and its tilt rises in the evening. The compensation absorbs it almost entirely: the median of the corrected curves of the targets hardly moves away from its level, one single measurement in early afternoon. Deduced cause: the camera and its mount move with the heat of the day (camera pose); the structure, a masonry wall, is not supposed to move like that. No temperature is available to confirm it. Normal, nothing to do.", "review": "2026-11-17"}
{"id": "SNCF01-69", "start": "2026-10-21T19:30Z", "end": "2026-10-22T10:30Z", "family": "No data", "description": "Night outage, one single isolated measurement at the start. No measurement for any sensor, all curves are missing; no image either. The power metrics of the station are empty over the whole month: the cause is not established (acquisition, power or transmission). If long outages repeat, check the power and the transmission of the station.", "review": "2026-11-17"}
{"id": "SNCF01-70", "start": "2026-10-22T10:30Z", "end": "2026-10-22T13:30Z", "family": "No data", "description": "Between two outages, on 22/10 in late morning, measurements are missing intermittently: only a few isolated measurements arrive. No measurement for any sensor between them, all curves are missing; no image either. The power metrics of the station are empty over the whole month: the cause is not established (acquisition, power or transmission). If long outages repeat, check the power and the transmission of the station.", "review": "2026-11-17"}
{"id": "SNCF01-71", "start": "2026-10-22T10:30Z", "end": "2026-10-22T15:30Z", "family": "Thermal displacement", "description": "Daytime thermal cycle (22/10), over a few measurements between two outages: the pan of the camera drops and its scale rises until early afternoon, then they begin to come back before the outage. The compensation absorbs it: the median of the corrected curves of the targets stays at its level. Deduced cause: the camera and its mount move with the heat of the day (camera pose); the structure, a masonry wall, is not supposed to move like that. No temperature is available to confirm it. Normal, nothing to do.", "review": "2026-11-17"}
{"id": "SNCF01-72", "start": "2026-10-22T10:30Z", "end": "2026-10-22T15:30Z", "family": "Visibility", "description": "By day (22/10): the corrected curves of all targets fluctuate much more than at night, from one measurement to the next, especially CV.2, CV.4, F4.2, BG.3, CV.6, CV.9, with one-measurement jumps that come back at once, and CV.2, CV.4 (sometimes F4.2) are rejected at times, their curves having gaps; their recognition error varies strongly by day. At night everything becomes calm again. Deduced cause: heat shimmer from the air heated above the tracks (a fast noise over the whole scene, by day only), not visible on the images; the rejections of CV.2 and CV.4, low targets, may also come from passages, not seen. Do not trust the small movements of these curves by day; this is not a movement of the structure.", "review": "2026-11-17"}
{"id": "SNCF01-73", "start": "2026-10-22T15:00Z", "end": "2026-10-25T08:30Z", "family": "No data", "description": "One measurement is missing on 22/10 in the afternoon, then, after a single isolated measurement, an outage of nearly three days, until the morning of 25/10. No measurement for any sensor, all curves are missing; no image either. The power metrics of the station are empty over the whole month: the cause is not established (acquisition, power or transmission). If long outages repeat, check the power and the transmission of the station.", "review": "2026-11-17"}
{"id": "SNCF01-74", "start": "2026-10-25T08:30Z", "end": "2026-10-25T15:00Z", "family": "Visibility", "description": "By day (25/10): the corrected curves of all targets fluctuate much more than at night, from one measurement to the next, especially CV.2, CV.4, F4.2, BG.3, CV.6, CV.9, with one-measurement jumps that come back at once, and CV.2, CV.4 (sometimes F4.2) are rejected at times, their curves having gaps; their recognition error varies strongly by day. At night everything becomes calm again. Deduced cause: heat shimmer from the air heated above the tracks (a fast noise over the whole scene, by day only), not visible on the images; the rejections of CV.2 and CV.4, low targets, may also come from passages, not seen. Do not trust the small movements of these curves by day; this is not a movement of the structure.", "review": "2026-11-17"}
{"id": "SNCF01-75", "start": "2026-10-25T08:30Z", "end": "2026-10-25T22:15Z", "family": "Thermal displacement", "description": "Daytime thermal cycle (25/10): from the morning, the pan and the tilt of the camera drop and its scale rises, then they slowly come back in the afternoon and the evening; measurements resumed in the morning after the outage. The corrected curves follow the same cycle, poorly compensated: corr_x of P7, P5, P6 and corr_y of P5, P6, P7, P4 move away from their night level during the day then come back, partly all at once at nightfall, when the recognition error also comes back (the lighting plays a part). Deduced cause: the camera and its mount move with the heat of the day (camera pose); the structure, a masonry wall, is not supposed to move like that. No temperature is available to confirm it. Normal, nothing to do.", "review": "2026-11-17"}
{"id": "SNCF01-76", "start": "2026-10-25T23:30Z", "end": "2026-10-26T00:00Z", "family": "Obstruction", "description": "The CV targets (CV.1, CV.2, CV.4, CV.5, CV.8, CV.9) and F4.2 are rejected together for the time of one measurement, their curves are missing; the references hold (BG.3.1 rises just under its threshold), the other targets do not move. Cause: probably a passage in front of this part of the scene, deduced from the signature (no image at that moment). The structure is not moving: point to ignore, nothing to do.", "review": "2026-11-17"}
{"id": "SNCF01-77", "start": "2026-10-26T08:15Z", "end": "2026-10-26T22:00Z", "family": "Thermal displacement", "description": "Daytime thermal cycle (26/10): from the morning, the pan and the tilt of the camera drop and its scale rises, with no return before the 22:00 outage: the pan keeps dropping in the evening, during the visibility drop labelled separately. The corrected curves follow the same cycle, poorly compensated: corr_x of P7, P5, P6 and corr_y of P5, P6, P7, P4 move away from their night level during the day then come back, partly all at once at nightfall, when the recognition error also comes back (the lighting plays a part). Deduced cause: the camera and its mount move with the heat of the day (camera pose); the structure, a masonry wall, is not supposed to move like that. No temperature is available to confirm it. Normal, nothing to do.", "review": "2026-11-17"}
{"id": "SNCF01-78", "start": "2026-10-26T14:30Z", "end": "2026-10-26T15:15Z", "family": "No data", "description": "Two measurements are missing for all sensors, all curves are missing; no image either. The power metrics of the station are empty over the whole month. The same gap occurs at the same time on the other stations that measure at that time (CLARIDEN, FLORIDA, JUNGFRAU, LENZSPITZE, NIEDERHORN, NORDEND), and their metrics are also missing at the same minutes: a common cause outside the station (transmission or reception of the data), not a station failure; it is not established. The curves are missing over the range; nothing to do on the station. The hourly metrics of BREITHORN, MICHIGAN and NEBRASKA are also missing at 15:00.", "review": "2026-11-17"}
{"id": "SNCF01-79", "start": "2026-10-26T14:30Z", "end": "2026-10-26T22:00Z", "family": "Visibility", "description": "In late afternoon and in the evening, the recognition error of P1, CV.1, P2, P3, P6 and of the reference R2 rises markedly and stays high until the 22:00 outage; F4.2 then CV.8 are rejected for a while; the corrected curves move away at the same time: corr_y drops on P1, rises on CV.1, corr_x rises on P5, P6, against the usual evening thermal cycle, and the recalibration of the camera degrades. The 16:00 to 21:00 thumbnails show nothing clear. Cause not established (visibility dropping over the scene). Do not trust the curves over the range; this is not a movement.", "review": "2026-11-17"}
{"id": "SNCF01-80", "start": "2026-10-26T22:00Z", "end": "2026-10-28T07:15Z", "family": "No data", "description": "Outage of more than a day, with a single isolated measurement on 27/10 at 14:00. No measurement for any sensor, all curves are missing; no image either. The power metrics of the station are empty over the whole month: the cause is not established (acquisition, power or transmission). If long outages repeat, check the power and the transmission of the station.", "review": "2026-11-17"}
{"id": "SNCF01-81", "start": "2026-10-28T07:15Z", "end": "2026-10-28T16:15Z", "family": "Visibility", "description": "By day (28/10): the corrected curves of all targets fluctuate much more than at night, from one measurement to the next, especially CV.2, CV.4, F4.2, BG.3, CV.6, CV.9, with one-measurement jumps that come back at once, and CV.2, CV.4 (sometimes F4.2) are rejected at times, their curves having gaps; their recognition error varies strongly by day. At night everything becomes calm again. Deduced cause: heat shimmer from the air heated above the tracks (a fast noise over the whole scene, by day only), not visible on the images; the rejections of CV.2 and CV.4, low targets, may also come from passages, not seen. Do not trust the small movements of these curves by day; this is not a movement of the structure.", "review": "2026-11-17"}
{"id": "SNCF01-82", "start": "2026-10-28T07:30Z", "end": "2026-10-28T22:45Z", "family": "Thermal displacement", "description": "Daytime thermal cycle (28/10): from the morning, the pan and the tilt of the camera drop and its scale rises, then they slowly come back in the afternoon and the evening; measurements resumed in the morning after the outage. The corrected curves follow the same cycle, poorly compensated: corr_x of P7, P5, P6 and corr_y of P5, P6, P7, P4 move away from their night level during the day then come back, partly all at once at nightfall, when the recognition error also comes back (the lighting plays a part). Deduced cause: the camera and its mount move with the heat of the day (camera pose); the structure, a masonry wall, is not supposed to move like that. No temperature is available to confirm it. Normal, nothing to do.", "review": "2026-11-17"}
{"id": "SNCF01-83", "start": "2026-10-28T10:15Z", "end": "2026-10-28T10:45Z", "family": "Obstruction", "description": "CV.2 makes a very large jump in corr_x and corr_y for the time of one measurement, its raw position jumping by several pixels: another spot was taken for the target; CV.4 is rejected; everything comes back at the next measurement. Cause: probably a passage, like on 17/10 at 10:00; deduced (no image at that moment). The structure is not moving: point to ignore, nothing to do.", "review": "2026-11-17"}
{"id": "SNCF01-84", "start": "2026-10-28T21:00Z", "end": "2026-10-28T21:30Z", "family": "Obstruction", "description": "One single measurement: most targets (the CV, the F4 and some of the P) are rejected and their curves are missing; the references are affected too (BG.3.1 and R1 rejected), the compensation retains none of them, and the targets that stayed under the threshold (BG.2, BG.3, F4.5 and some P) jump in corr_x and corr_y for the time of the measurement. Everything comes back at the next measurement. Cause: a passage in front of the targets and the references, no image at that moment; deduced from the signature, the same as that of the trains seen on the images of the other passages. The structure is not moving: point to ignore, nothing to do.", "review": "2026-11-17"}
{"id": "SNCF01-85", "start": "2026-10-28T22:30Z", "end": "2026-10-28T23:00Z", "family": "Obstruction", "description": "One single measurement: most targets (the CV, the F4 and some of the P) are rejected and their curves are missing; the references are affected too (BG.3.1 and R1 rejected), the compensation retains none of them, and the targets that stayed under the threshold (BG.2, BG.3, F4.5 and some P) jump in corr_x and corr_y for the time of the measurement. Everything comes back at the next measurement. Cause: a passage in front of the targets and the references, no image at that moment; deduced from the signature, the same as that of the trains seen on the images of the other passages. The structure is not moving: point to ignore, nothing to do.", "review": "2026-11-17"}
{"id": "SNCF01-86", "start": "2026-10-29T08:00Z", "end": "2026-10-29T16:00Z", "family": "Visibility", "description": "By day (29/10): the corrected curves of all targets fluctuate much more than at night, from one measurement to the next, especially CV.2, CV.4, F4.2, BG.3, CV.6, CV.9, with one-measurement jumps that come back at once, and CV.2, CV.4 (sometimes F4.2) are rejected at times, their curves having gaps; their recognition error varies strongly by day. At night everything becomes calm again. Deduced cause: heat shimmer from the air heated above the tracks (a fast noise over the whole scene, by day only), not visible on the images; the rejections of CV.2 and CV.4, low targets, may also come from passages, not seen. Do not trust the small movements of these curves by day; this is not a movement of the structure.", "review": "2026-11-17"}
{"id": "SNCF01-87", "start": "2026-10-29T08:30Z", "end": "2026-10-29T23:15Z", "family": "Thermal displacement", "description": "Daytime thermal cycle (29/10): from the morning, the pan and the tilt of the camera drop and its scale rises, then they slowly come back in the afternoon, the evening and the evening. The corrected curves follow the same cycle, poorly compensated: corr_x of P7, P5, P6 and corr_y of P5, P6, P7, P4 move away from their night level during the day then come back, partly all at once at nightfall, when the recognition error also comes back (the lighting plays a part). Deduced cause: the camera and its mount move with the heat of the day (camera pose); the structure, a masonry wall, is not supposed to move like that. No temperature is available to confirm it. Normal, nothing to do.", "review": "2026-11-17"}
{"id": "SNCF01-88", "start": "2026-10-29T14:45Z", "end": "2026-10-29T15:15Z", "family": "No data", "description": "One measurement is missing for all sensors, all curves have a gap, although the 15:00 image exists. The power metrics of the station are empty over the whole month. The same gap occurs at the same time on the other stations that measure at that time (CLARIDEN, LENZSPITZE, NORDEND): a common cause outside the station (transmission or reception of the data), not a station failure; it is not established. The curves are missing over the range; nothing to do on the station.", "review": "2026-11-17"}
{"id": "SNCF01-89", "start": "2026-10-30T08:00Z", "end": "2026-10-31T07:45Z", "family": "Thermal displacement", "description": "Daytime thermal cycle (30/10): from the morning, the pan and the tilt of the camera drop and its scale rises, then they slowly come back in the afternoon, the evening and all night, until the start of the next morning. The corrected curves follow the same cycle, poorly compensated: corr_x of P7, P5, P6 and corr_y of P5, P6, P7, P4 move away from their night level during the day then come back, partly all at once at nightfall, when the recognition error also comes back (the lighting plays a part). Deduced cause: the camera and its mount move with the heat of the day (camera pose); the structure, a masonry wall, is not supposed to move like that. No temperature is available to confirm it. Normal, nothing to do.", "review": "2026-11-17"}
{"id": "SNCF01-90", "start": "2026-10-30T08:30Z", "end": "2026-10-30T19:00Z", "family": "Visibility", "description": "By day (30/10): the corrected curves of all targets fluctuate much more than at night, from one measurement to the next, especially CV.2, CV.4, F4.2, BG.3, CV.6, CV.9, with one-measurement jumps that come back at once, and CV.2, CV.4 (sometimes F4.2) are rejected at times, their curves having gaps; their recognition error varies strongly by day. At night everything becomes calm again. Deduced cause: heat shimmer from the air heated above the tracks (a fast noise over the whole scene, by day only), not visible on the images; the rejections of CV.2 and CV.4, low targets, may also come from passages, not seen. Do not trust the small movements of these curves by day; this is not a movement of the structure.", "review": "2026-11-17"}
{"id": "SNCF01-91", "start": "2026-10-30T17:45Z", "end": "2026-10-30T18:15Z", "family": "Obstruction", "description": "One single measurement: most targets (the CV, the F4 and some of the P) are rejected and their curves are missing; the references are affected too (BG.3.1 and R1 rejected), the compensation retains none of them, and the targets that stayed under the threshold (BG.2, BG.3, F4.5 and some P) jump in corr_x and corr_y for the time of the measurement. Everything comes back at the next measurement. Cause: a passage in front of the targets and the references, a lit train passing: on the 18:00 night image, most of the spots have disappeared and large bright spots appear. The structure is not moving: point to ignore, nothing to do.", "review": "2026-11-17"}
{"id": "SNCF01-92", "start": "2026-10-30T18:15Z", "end": "2026-10-30T18:45Z", "family": "Obstruction", "description": "One single measurement: most targets (the CV, the F4 and some of the P) are rejected and their curves are missing; the references are affected too (BG.3.1 and R1 rejected), the compensation retains none of them, and the targets that stayed under the threshold (BG.2, BG.3, F4.5 and some P) jump in corr_x and corr_y for the time of the measurement. Everything comes back at the next measurement. Cause: a passage in front of the targets and the references, no image at that moment; deduced from the signature, the same as that of the trains seen on the images of the other passages. The structure is not moving: point to ignore, nothing to do.", "review": "2026-11-17"}
{"id": "SNCF01-93", "start": "2026-10-30T21:15Z", "end": "2026-10-30T22:00Z", "family": "Obstruction", "description": "Two measurements, at night: at the first, CV.2 is rejected, its curve is missing; the recognition error of the reference BG.3.1 and of P2 rises markedly without exceeding the threshold, and P1, P2, BG.2 jump in corr_x and corr_y for the time of the measurement. At the second, F4.2 is rejected in turn, its curve is missing; everything then comes back. Cause: probably a passage in front of the bottom of the scene and the reference BG.3.1, deduced from the signature, weaker than that of the trains (no image at that moment). The structure is not moving: point to ignore, nothing to do.", "review": "2026-11-17"}
{"id": "SNCF01-94", "start": "2026-10-30T21:30Z", "end": "2026-10-30T22:00Z", "family": "Visibility", "description": "F4.2 is rejected for the time of one measurement, its recognition error just above its threshold, then comes back; the other targets stay at their usual level. F4.2 lives just under its threshold throughout the batch, like CV.2, CV.8 and CV.9, and crosses it now and then: cause not established. Point to ignore, nothing to do.", "review": "2026-11-17"}
{"id": "SNCF01-95", "start": "2026-10-31T07:00Z", "end": "2026-10-31T07:30Z", "family": "Visibility", "description": "F4.2 is rejected for the time of one measurement, its recognition error just above its threshold, then comes back; the other targets stay at their usual level. F4.2 lives just under its threshold throughout the batch, like CV.2, CV.8 and CV.9, and crosses it now and then: cause not established. Point to ignore, nothing to do.", "review": "2026-11-17"}
{"id": "SNCF01-96", "start": "2026-10-31T07:45Z", "end": "2026-10-31T15:45Z", "family": "Visibility", "description": "By day (31/10): the corrected curves of all targets fluctuate much more than at night, from one measurement to the next, especially CV.2, CV.4, F4.2, BG.3, CV.6, CV.9, with one-measurement jumps that come back at once, and CV.2, CV.4 (sometimes F4.2) are rejected at times, their curves having gaps; their recognition error varies strongly by day. At night everything becomes calm again. Deduced cause: heat shimmer from the air heated above the tracks (a fast noise over the whole scene, by day only), not visible on the images; the rejections of CV.2 and CV.4, low targets, may also come from passages, not seen. Do not trust the small movements of these curves by day; this is not a movement of the structure.", "review": "2026-11-17"}
{"id": "SNCF01-97", "start": "2026-10-31T07:45Z", "end": "2026-11-01T00:00Z", "family": "Thermal displacement", "description": "Daytime thermal cycle (31/10): from the morning, the pan and the tilt of the camera drop and its scale rises, then they slowly come back in the afternoon, the evening and the evening. The corrected curves follow the same cycle, poorly compensated: corr_x of P7, P5, P6 and corr_y of P5, P6, P7, P4 move away from their night level during the day then come back, partly all at once at nightfall, when the recognition error also comes back (the lighting plays a part). Deduced cause: the camera and its mount move with the heat of the day (camera pose); the structure, a masonry wall, is not supposed to move like that. No temperature is available to confirm it. Normal, nothing to do.", "review": "2026-11-17"}