Files
aimsight-labeling/auto/analyses/FLORIDA_2026-10-22T0315_2026-11-01T0000/analysis.md
T
maximeandClaude Opus 5.5 ddb17c2189 auto: labels requalified under the 5-noise rules (only what stands out from the noise): 32 analyses refined, the 6 paused periods verified, the long labels requalified with the fixes the period analysts found; 1153 -> 961 labels
- 32 analyses: each label kept, rewritten or removed by its analyst (section Requalification of the report; mm magnitudes where the targets have them)
- SNCF01 x3, WILDSTRUBEL 2026-09-01 -> 2026-10-06 x3: verified from their existing labels under the new rules
- long labels (no analysis): auto/analyses/long-labels/<STATION>/; NORDEND-169 and -195 run to 07/11, so NORDEND-283 and -284 (their continuation) are removed
- reading-rules.md, stations.md: the citations of removed or rewritten labels point to their successor, or to [expert]

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-17 23:58:00 +01:00

100 lines
11 KiB
Markdown
Raw Blame History

This file contains ambiguous Unicode characters
This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.
# Labels: FLORIDA, 2026-10-22T03:15Z → 2026-11-01T00:00Z (UTC)
This analysis first checked the 19 existing labels (all reviewed 2026-11-17) and added FLORIDA-79. It was then **requalified** under the new rule (`labeling-rules.md`, section 1): only what stands out from the noise of the corrected curves is labelled, at more than 5 of the target's own noises. Result: **18 labels kept unchanged, 0 rewritten, 2 removed** (FLORIDA-47 and FLORIDA-52). See "## Requalification" below.
Weather: FLORIDA has no `weather/` folder, so no weather is available.
Targets (`inventory.py`): Sellette 3 (33 m, 6.5 mm/px, twin of p1_r), Sellette 4 (48 m, 9.6 mm/px), Sellette 5 (64 m, 12.8 mm/px), Sellette 6 (80 m, 15.9 mm/px, Target issue FLORIDA-1), Massif 2 (99 m, 19.6 mm/px, Target issue FLORIDA-14), Pont Ernen (373 m, 74 mm/px, twin of r1_r). Only two references, p1_r and r1_r. The twins are not labelled for themselves. Their corr sits at zero with a near-zero noise, so a deviation "in noises" means nothing for them. The Target issue targets are read but are not used alone to justify a label. The requalification therefore rests on Sellette 4 and Sellette 5.
## Verdict per old id (first pass, then requalification)
- FLORIDA-46 (22 03:15→03:45, Displacement): **kept**. Sellette 4 corr_x steps up at 03:30 and stays. Against the night before, this is +11.7 noises at the extreme, 22 measurements above 5 noises on the morning, and a jump of 6.8 noises.
- FLORIDA-47 (22 08:45→17:00, Thermal): **removed** at requalification: the thermal movement is compensated (details in section 2).
- FLORIDA-48 (22 11:15→13:30, Visibility, r1_r lost): **kept**. Sellette 5 reaches +6.3 noises at 13:00, Sellette 4 +5.2.
- FLORIDA-49 (23 03:45→09:15, Visibility, r1_r lost): **kept**. Sellette 5 reaches +6.4 noises (07:00–09:00), Sellette 4 +5.5.
- FLORIDA-50 (23 12:15→20:15, Visibility, mist): **kept**. Sellette 4 corr_x +36 noises, corr_y ±22 noises. Sellette 5 +23 noises.
- FLORIDA-51 (23 22:00→24 01:45, Visibility): **kept**. Sellette 4 corr_x +7.3 noises (rolling) or +10.4 noises (window level), corr_y +7.4 noises.
- FLORIDA-52 (24 01:45→02:15, Visibility, r1_r lost for one measurement): **removed** at requalification: the curves do not move (details in section 2).
- FLORIDA-53 (24 07:00→14:45, Visibility, r1_r lost): **kept**. Against the level outside the episode, Sellette 5 reaches +7.5 noises (12:00–14:30) and Sellette 4 +6.9.
- FLORIDA-54 (24 21:45→25 21:15, Visibility, rain): **kept**. Sellette 4 corr_x +51 and −18 noises.
- FLORIDA-55 (26 08:30→12:00, Visibility, r1_r lost): **kept**. Sellette 5 reaches +6.7 noises (10:30–11:45).
- FLORIDA-56 (26 11:45→19:00, Thermal): **kept**. Sellette 5 corr_y is above its night level by up to +7.9 noises at 14:00, with 15 measurements around the maximum.
- FLORIDA-57 (26 14:30→15:15, No data): **kept**. The two steps at 14:45 and 15:00 are absent for all sensors.
- FLORIDA-58 (27 01:45→11:45, Visibility, r1_r): **kept**. Sellette 5 reaches −7.2 noises at 02:15 and +5.3 noises at 06:15–06:45. Sellette 4 reaches −6.3 noises.
- FLORIDA-59 (27 09:00→09:30, No data): **kept**. The 09:15 step is absent for all sensors.
- FLORIDA-60 (27 11:30→20:00, Thermal): **kept**. Against the night level, Sellette 5 corr_x reaches −8.8 noises at 12:45 and Sellette 4 −6.5.
- FLORIDA-61 (28 07:00→10:30, Visibility, r1_r lost): **kept**. Sellette 5 reaches +6.4 noises and Sellette 4 +6.1.
- FLORIDA-79 (28 10:15→19:45, Thermal, not reviewed): **kept**. Sellette 5 corr_y reaches +6.4 noises over its night level at 11:15, with 17 measurements above 5 noises from 09:15 to 15:00.
- FLORIDA-62, 63, 64 (29, 30, 31, Thermal): **kept**. Sellette 5 corr_y reaches +8.1, +8.8 and +9.1 noises over its night level.
## 1. My labels
### 2026-10-28T10:15Z → 2026-10-28T19:45Z (FLORIDA-79, added in the first pass, kept)
- **Phenomenon of the catalogue**: The camera moves through a thermal effect
- **Precedents**: FLORIDA-56 and FLORIDA-60 (same station; a thermal label that starts at the last rejection of the morning r1_r loss) and FLORIDA-62 to 64 (same shape). `precedents.py` was not run (usage limit in the first pass).
- **Family**: Thermal displacement. The pose and Sellette 5 corr_y follow the housing temperature (19.7 → 24.3) and come back with it. error_value stays at its level.
- **Measured**: rotation goes from about +0.01 at night to −0.014 at 12:00–14:00, then is back to +0.005 at 19:30. Tilt goes from +0.006 to +0.017. Pan stays flat. Sellette 5 corr_y is above its night level by up to +6.4 noises at 11:15 (`days.py --bounds`), with 17 measurements above 5 noises from 09:15 to 15:00. That is about +0.09 px, or about 1.2 mm.
- **Images**: none (not looked at, usage limit in the first pass).
- **Confidence**: medium. The cycle is clear on the pose, and it clears the threshold, but by a small margin.
## 2. What I left without a label
### Removed at the requalification
- **FLORIDA-47, 2026-10-22T08:45Z → 2026-10-22T17:00Z, Thermal displacement: removed, compensated thermal.** The pan drifts with the housing temperature, but the compensation absorbs it.
- **Sellette 5:** against the night of the 21st, corr_y peaks at +2.9 noises (14:30). Its corr_x exceeds 5 noises only at 13:00–13:15 (+5.3), which is inside FLORIDA-48, the loss of r1_r.
- **Sellette 4:** against its level after the step of FLORIDA-46 (`ranges.py --rolling 1d`), it passes 5 noises only at 06:00 (+5.1, a single point before the cycle) and at 13:00–13:15 (FLORIDA-48).
- **Sellette 6:** its corr_y reaches +8.9 noises (15:00–17:00), but it is under its Target issue (FLORIDA-1). It was rejected from 09:00 to 14:45 that day, so its curve is unreadable and does not carry a label alone.
- The label's own description already said that the corrected curves show almost nothing.
- **FLORIDA-52, 2026-10-24T01:45Z → 2026-10-24T02:15Z, Visibility: removed, missing points only.** r1_r and Pont Ernen are rejected at 02:00 for one measurement. Against the local level (`ranges.py --rolling 8`, 23 20:00 → 24 05:00), nothing exceeds 5 noises around 02:00. At 02:00, Sellette 5 corr_x is 0.110 against a level of 0.110 (0 noises). Sellette 6 is at 0.180 against 0.156 (about +1 noise), and Sellette 4 at 0.190 against 0.190 (0 noises). Nothing moves in corr_y either. The earlier ranges in that window (Sellette 4 at 00:00–01:00, Sellette 5 at 22:45) belong to FLORIDA-51.
### Unchanged from the first pass
- **23rd, 09:15–12:15.** Rotation goes to −0.02 as the temperature rises to 20.5, then the mist starts. This is −3.1 noises, and Sellette 5 corr_y does not move: no thermal label.
- **24th.** No thermal cycle above 5 noises against the night level: Sellette 5 corr_y peaks at +4.8 noises and corr_x at +2.3. The pose is mostly absent.
- **25th.** The cycle is masked by the rain (FLORIDA-54).
- **29th–31st, evenings.** Sellette 5 corr_y goes 6 to 8 noises below the window level from 18:00 to 23:45. This is the lower night level after the warm days (the next night minus the reference night is −1.2 to −2.8 noises), not an event of its own.
- **Sellette 6 and Massif 2.** Both are under their Target issue labels (FLORIDA-1, FLORIDA-14). Their large excursions while accepted (for example Massif 2 corr_y +17 noises on the 26th to 28th) are read as part of these regimes.
## 3. The documentation
- The 5-noise rule removed the two labels whose own description said there was no effect on the curves (FLORIDA-47) or only one missing point (FLORIDA-52).
- For a jump-and-return, the level must be measured outside the episode (`ranges.py --outside`). The window level over ten days hid FLORIDA-53: Sellette 4 at 5.1 and Sellette 5 at nothing against the window, but +6.9 and +7.5 noises locally. For a step (FLORIDA-46), the level must be read against the night before. Against several days before, the step is only about 2.4 noises, because the earlier days sat at another level.
- What is missing: the rules do not say whether a Target issue target (here Sellette 6, rejected half the time) may alone carry a movement label. I did not let it, following the thermal description rule ("without those that a Target issue makes unreadable").
- On a two-reference station, every loss of r1_r gives Sellette 4 and Sellette 5 the same, repeatable offset, close to the threshold (about 5 to 7 noises). The one-measurement loss at 02:00 on the 24th gave none.
## Requalification
Commands (from the repository root, `--out` in `work/rq`):
- `python3 tools/scripts/ranges.py data/FLORIDA --columns corr_x,corr_y --k 5 --start 2026-10-22T03:15Z --end 2026-11-01T00:00Z` → `work/rq_ranges_k5.txt`
- `.venv/bin/python tools/scripts/days.py data/FLORIDA --columns corr_x,corr_y --sensors <target> --bounds --start 2026-10-21T00:00Z --end 2026-11-01T00:00Z`, run for Sellette 4, Sellette 5, Sellette 6 and Massif 2 → `work/rq_days_*.txt`. This gives the thermal deviation from the night level.
- `ranges.py --sensors "Sellette 4","Sellette 5" --start 2026-10-21T20:00Z --end 2026-10-22T09:00Z --outside 2026-10-22T03:30Z/2026-10-22T09:00Z` (FLORIDA-46), and with `--rolling 1d` to 23 03:00 (FLORIDA-47).
- `ranges.py --rolling 8 --start 2026-10-23T20:00Z --end 2026-10-24T05:00Z` (FLORIDA-51, FLORIDA-52), plus `summary.py --column corr_x --step 15min --start 2026-10-24T01:00Z --end 2026-10-24T03:00Z`.
- `ranges.py --outside <label>` on a window of ±6 h around each r1_r loss (FLORIDA-48, 49, 53, 55, 58, 61) → `work/rq_outside.txt`.
Values (largest deviation of a readable target, in its own noises):
| id | family | deviation | verdict |
|---|---|---|---|
| FLORIDA-46 | Displacement | S4 corr_x +11.7 (vs night before), jump 6.8 | kept |
| FLORIDA-47 | Thermal | S5 +2.9 corr_y; S4, S5 > 5 only inside FLORIDA-48 | removed |
| FLORIDA-48 | Visibility | S5 +6.3, S4 +5.2 | kept |
| FLORIDA-49 | Visibility | S5 +6.4, S4 +5.5 | kept |
| FLORIDA-50 | Visibility | S4 +36, S5 +23 | kept |
| FLORIDA-51 | Visibility | S4 +10.4 corr_x, +7.4 corr_y | kept |
| FLORIDA-52 | Visibility | ≤ 1 at 02:00 | removed |
| FLORIDA-53 | Visibility | S5 +7.5, S4 +6.9 (outside level) | kept |
| FLORIDA-54 | Visibility | S4 +51 / −18 | kept |
| FLORIDA-55 | Visibility | S5 +6.7 | kept |
| FLORIDA-56 | Thermal | S5 corr_y +7.9 | kept |
| FLORIDA-57 | No data | 2 steps absent, all sensors | kept |
| FLORIDA-58 | Visibility | S5 −7.2 / +5.3, S4 −6.3 | kept |
| FLORIDA-59 | No data | 1 step absent, all sensors | kept |
| FLORIDA-60 | Thermal | S5 corr_x −8.8, S4 −6.5 | kept |
| FLORIDA-61 | Visibility | S5 +6.4, S4 +6.1 | kept |
| FLORIDA-79 | Thermal | S5 corr_y +6.4 | kept |
| FLORIDA-62/63/64 | Thermal | S5 corr_y +8.1 / +8.8 / +9.1 | kept |
`python3 labeling/scripts/validate.py labeling/auto/analyses/FLORIDA_2026-10-22T0315_2026-11-01T0000/labels.jsonl`: 18 labels, 0 errors.
## Difficulties
- First pass: the usage limit was reached, so no images were looked at for FLORIDA-79, no precedents query was run, and no GIF was made.
- Requalification: the rule does not say which level to use for a step or a jump-and-return: the window, outside the episode, or the night before. I used the local level outside the episode, and the night before for the step.
## Sources read
instructions/analyst.md, tools/GUIDE.md, tools/DATA.md, labeling/families.md, labeling/labeling-rules.md, labeling/reading-rules.md, labeling/stations.md, work/requalify_input.jsonl, the previous analysis.md and report.md of this folder. Tools: inventory.py, ranges.py, days.py --bounds, summary.py, plot.py.