- base_connaissances/ → snippets/ (corpus/ → textes/, instructions.md → consignes_redaction.md, decoupage.py → fichiers.py, importer.py → envoyer.py) ; python3 -m snippets.envoyer. - instance-de-test/ : 1_demarrer.sh, 2_creer_boite_et_cle.py, 3_brancher_ia.py, 4_essayer_brouillons.py, voir_empreintes.sh, connexion_admin.py. - ollama/verifier.py → ollama/verifier_ollama.py ; tests, tâches VS Code et docs alignés. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
18 lines
1.0 KiB
Markdown
18 lines
1.0 KiB
Markdown
# My AIMsight camera does not start. What should I check?
|
|
|
|
First check that the internal battery is connected. Depending on transport or storage conditions,
|
|
the battery may have been disconnected and must be connected before commissioning.
|
|
Then connect the external power supply and check the charging / power LED.
|
|
If the LED does not turn on:
|
|
• check that the external power supply is connected;
|
|
• check the power connectors and cabling;
|
|
• for a mains-powered installation, verify that the power supply is energized;
|
|
• for a solar-powered installation, verify the solar-panel connection and that sufficient
|
|
charging voltage is available.
|
|
If the unit appears to be powered but cannot be reached remotely, try connecting to it locally
|
|
over Ethernet. This helps distinguish a startup or power problem from a 4G or remoteconnectivity problem.
|
|
If there is no charging indication and the system remains unreachable after checking the power
|
|
supply and battery connection, contact AIMsight support.
|
|
|
|
Source : AIMsight FAQ, rév. 1.5
|