- base_connaissances/ → snippets/ (corpus/ → textes/, instructions.md → consignes_redaction.md, decoupage.py → fichiers.py, importer.py → envoyer.py) ; python3 -m snippets.envoyer. - instance-de-test/ : 1_demarrer.sh, 2_creer_boite_et_cle.py, 3_brancher_ia.py, 4_essayer_brouillons.py, voir_empreintes.sh, connexion_admin.py. - ollama/verifier.py → ollama/verifier_ollama.py ; tests, tâches VS Code et docs alignés. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
26 lines
1.2 KiB
Markdown
26 lines
1.2 KiB
Markdown
# Station Guide — Network Settings
|
|
|
|
This section describes the Network Settings interface of the AIMsight Monitoring software. It
|
|
allows configuration of how the device communicates with external systems and local networks.
|
|
The interface is divided into two main sections:
|
|
• Ethernet (wired network)
|
|
• Cellular network (mobile connection)
|
|
The Ethernet section manages the physical connection through an Ethernet cable. Two
|
|
configuration modes are available:
|
|
• automatic (DHCP)
|
|
• manual (static IP)
|
|
Automatic configuration is recommended whenever possible.
|
|
• Automatic configuration (DHCP): by default, the camera is configured as a DHCP server
|
|
and automatically assigns an IP address to the connected computer. The computer must be
|
|
configured to obtain an IP address automatically, and no external network infrastructure is
|
|
required.
|
|
• Manual configuration: the IP address is configured manually.
|
|
Recommended manual configuration:
|
|
• IP address: 192.168.1.10
|
|
• Subnet mask: 255.255.255.0
|
|
CAUTION
|
|
The PC must be configured within the same network range as the camera (192.168.1.X) and
|
|
must use a unique IP address to prevent IP conflicts.
|
|
|
|
Source : AIMsight Station Guide, rév. 1.5
|